FAIL Apache-AuthzUserDir-0.92 i386-freebsd 7.2-release

This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language.  See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org


--

Dear NINJAZ,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.88. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Sun Sep 13 02:53:04 2009] Trying to get 'http://cpan.hexten.net/authors/id/N/NI/NINJAZ/Apache-AuthzUserDir-0.92.tar.gz'
[MSG] [Sun Sep 13 02:53:06 2009] Trying to get 'http://cpan.hexten.net/authors/id/N/NI/NINJAZ/CHECKSUMS'
[MSG] [Sun Sep 13 02:53:06 2009] Checksum matches for 'Apache-AuthzUserDir-0.92.tar.gz'
[MSG] [Sun Sep 13 02:53:06 2009] Extracted 'Apache::AuthzUserDir' to '/usr/home/cpan/pit/bare/conf/perl-5.10.1/.cpanplus/5.10.1/build/Apache-AuthzUserDir-0.92'
[MSG] [Sun Sep 13 02:53:06 2009] CPANPLUS is prefering Build.PL
[MSG] [Sun Sep 13 02:53:06 2009] Loading YACSmoke database "/usr/home/cpan/pit/bare/conf/perl-5.10.1/.cpanplus/cpansmoke.dat"
[MSG] [Sun Sep 13 02:53:06 2009] Checking if your kit is complete...
Looks good
Writing Makefile for Apache::AuthzUserDir

[MSG] [Sun Sep 13 02:53:06 2009] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Sun Sep 13 02:53:06 2009] Checking for previous PASS result for "Apache-AuthzUserDir-0.92"
[MSG] [Sun Sep 13 02:53:07 2009] cp AuthzUserDir.pm blib/lib/Apache/AuthzUserDir.pm
Manifying blib/man3/Apache::AuthzUserDir.3

[ERROR] [Sun Sep 13 02:53:08 2009] MAKE TEST failed: No such file or directory PERL_DL_NONLAZY=1 /usr/home/cpan/pit/bare/perl-5.10.1/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
Can't locate Apache/Constants.pm in @INC (@INC contains: /usr/home/cpan/pit/bare/conf/perl-5.10.1/.cpanplus/5.10.1/build/Apache-AuthzUserDir-0.92/blib/lib /usr/home/cpan/pit/bare/conf/perl-5.10.1/.cpanplus/5.10.1/build/Apache-AuthzUserDir-0.92/blib/arch /usr/home/cpan/pit/bare/conf/perl-5.10.1/.cpanplus/5.10.1/build/Apache-AuthzUserDir-0.92/blib/lib /usr/home/cpan/pit/bare/conf/perl-5.10.1/.cpanplus/5.10.1/build/Apache-AuthzUserDir-0.92/blib/arch /usr/home/cpan/pit/bare/perl-5.10.1/lib/5.10.1/i386-freebsd /usr/home/cpan/pit/bare/perl-5.10.1/lib/5.10.1 /usr/home/cpan/pit/bare/perl-5.10.1/lib/site_perl/5.10.1/i386-freebsd /usr/home/cpan/pit/bare/perl-5.10.1/lib/site_perl/5.10.1 .) at /usr/home/cpan/pit/bare/conf/perl-5.10.1/.cpanplus/5.10.1/build/Apache-AuthzUserDir-0.92/blib/lib/Apache/AuthzUserDir.pm line 4.
BEGIN failed--compilation aborted at /usr/home/cpan/pit/bare/conf/perl-5.10.1/.cpanplus/5.10.1/build/Apache-AuthzUserDir-0.92/blib/lib/Apache/AuthzUserDir.pm line 4.
Compilation failed in require at t/use.t line 6.
BEGIN failed--compilation aborted at t/use.t line 6.
t/use.t .. 
Dubious, test returned 2 (wstat 512, 0x200)
Failed 1/1 subtests 

Test Summary Report
-------------------
t/use.t (Wstat: 512 Tests: 0 Failed: 0)
  Non-zero exit status: 2
  Parse errors: Bad plan.  You planned 1 tests but ran 0.
Files=1, Tests=0,  0 wallclock secs ( 0.05 usr  0.01 sys +  0.02 cusr  0.02 csys =  0.09 CPU)
Result: FAIL
Failed 1/1 test programs. 0/0 subtests failed.
*** Error code 2

Stop in /usr/home/cpan/pit/bare/conf/perl-5.10.1/.cpanplus/5.10.1/build/Apache-AuthzUserDir-0.92.

[MSG] [Sun Sep 13 02:53:08 2009] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'


MISSING PREREQUISITES:

It was observed that the test suite seem to fail without these modules:

Apache::Constants

As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem.  For example:

WriteMakefile(
    AUTHOR      => 'NINJAZ (cpanplus-info@lists.sf.net)',
    ... # other information
    PREREQ_PM   => {
	'Apache::Constants'	=> '0', # or a minimum working version
    }
);

Thanks! :-)


******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.44.
Powered by minismokebox version 0.18

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    PATH = /sbin:/bin:/usr/sbin:/usr/bin:/usr/games:/usr/local/sbin:/usr/local/bin:/home/cpan/bin
    PERL5LIB = :/usr/home/cpan/pit/bare/conf/perl-5.10.1/.cpanplus/5.10.1/build/Apache-AuthzUserDir-0.92/blib/lib:/usr/home/cpan/pit/bare/conf/perl-5.10.1/.cpanplus/5.10.1/build/Apache-AuthzUserDir-0.92/blib/arch
    PERL5_CPANPLUS_IS_RUNNING = 80556
    PERL5_CPANPLUS_IS_VERSION = 0.88
    PERL5_MINISMOKEBOX = 0.18
    PERL5_YACSMOKE_BASE = /usr/home/cpan/pit/bare/conf/perl-5.10.1/
    PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
    PERL_MM_USE_DEFAULT = 1
    SHELL = /usr/local/bin/bash
    TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

    Perl: $^X = /usr/home/cpan/pit/bare/perl-5.10.1/bin/perl
    UID:  $<  = 1003
    EUID: $>  = 1003
    GID:  $(  = 1003 1003 1003
    EGID: $)  = 1003 1003 1003


-------------------------------


--

Summary of my perl5 (revision 5 version 10 subversion 1) configuration:
   
  Platform:
    osname=freebsd, osvers=7.2-release, archname=i386-freebsd
    uname='freebsd wintermute.staffordshire.gov.uk 7.2-release freebsd 7.2-release #0: fri may 1 08:49:13 utc 2009 root@walker.cse.buffalo.edu:usrobjusrsrcsysgeneric i386 '
    config_args='-de -Dprefix=/usr/home/cpan/pit/bare/perl-5.10.1'
    hint=recommended, useposix=true, d_sigaction=define
    useithreads=undef, usemultiplicity=undef
    useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
    use64bitint=undef, use64bitall=undef, uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include',
    optimize='-O',
    cppflags='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
    ccversion='', gccversion='4.2.1 20070719  [FreeBSD]', gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
    ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=4, prototype=define
  Linker and Libraries:
    ld='cc', ldflags ='-Wl,-E  -fstack-protector -L/usr/local/lib'
    libpth=/usr/lib /usr/local/lib
    libs=-lgdbm -lm -lcrypt -lutil -lc
    perllibs=-lm -lcrypt -lutil -lc
    libc=, so=so, useshrplib=false, libperl=libperl.a
    gnulibc_version=''
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
    cccdlflags='-DPIC -fPIC', lddlflags='-shared  -L/usr/local/lib -fstack-protector'

• FAIL Apache-AuthzUserDir-0.92 i386-freebsd 7.2-release by bingos