UNKNOWN Fuse-0.09_3 s390x-linux 2.6.18-92.el5

This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/


--
Dear Dobrica Pavlinusic,
    
This is a computer-generated report for Fuse-0.09_3
on perl 5.10.0, created by CPAN-Reporter-1.1704. 

Thank you for uploading your work to CPAN.  However, attempting to
test your distribution gave an inconclusive result.  

This could be because your distribution had an error during the make/build
stage, did not define tests, tests could not be found, because your tests were
interrupted before they finished, or because the results of the tests could not
be parsed.  You may wish to consult the CPAN Testers Wiki:

http://cpantest.grango.org/wiki/CPANAuthorNotes

Sections of this report:

    * Tester comments
    * Program output
    * Prerequisites
    * Environment and other context

------------------------------
TESTER COMMENTS
------------------------------

Additional comments from tester: 

this report is from an automated smoke testing program
and was not reviewed by a human for accuracy

------------------------------
PROGRAM OUTPUT
------------------------------

Output from '/usr/bin/make':

cp Fuse.pm blib/lib/Fuse.pm
AutoSplitting blib/lib/Fuse.pm (blib/lib/auto/Fuse)
/home/ct/test/perl-5.10.0/bin/perl /home/ct/test/perl-5.10.0/lib/5.10.0/ExtUtils/xsubpp  -typemap /home/ct/test/perl-5.10.0/lib/5.10.0/ExtUtils/typemap  Fuse.xs > Fuse.xsc && mv Fuse.xsc Fuse.c
cc -c  -DFUSE_USE_VERSION=25  -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -O2   -DVERSION=\"0.09_3\" -DXS_VERSION=\"0.09_3\" -fPIC "-I/home/ct/test/perl-5.10.0/lib/5.10.0/s390x-linux/CORE"  -Wall -g -ggdb Fuse.c
Fuse.xs:30:18: error: fuse.h: No such file or directory
Fuse.xs:125: error: expected declaration specifiers or ‘...’ before ‘fuse_dirh_t’
Fuse.xs:125: error: expected declaration specifiers or ‘...’ before ‘fuse_dirfil_t’
Fuse.xs: In function ‘_PLfuse_getdir’:
Fuse.xs:139: warning: implicit declaration of function ‘dirfil’
Fuse.xs:139: error: ‘dirh’ undeclared (first use in this function)
Fuse.xs:139: error: (Each undeclared identifier is reported only once
Fuse.xs:139: error: for each function it appears in.)
Fuse.xs: At top level:
Fuse.xs:393: warning: ‘struct utimbuf’ declared inside parameter list
Fuse.xs:393: warning: its scope is only this definition or declaration, which is probably not what you want
Fuse.xs: In function ‘_PLfuse_utime’:
Fuse.xs:401: error: dereferencing pointer to incomplete type
Fuse.xs:402: error: dereferencing pointer to incomplete type
Fuse.xs: At top level:
Fuse.xs:418: warning: ‘struct fuse_file_info’ declared inside parameter list
Fuse.xs: In function ‘_PLfuse_open’:
Fuse.xs:420: error: dereferencing pointer to incomplete type
Fuse.xs: At top level:
Fuse.xs:443: warning: ‘struct fuse_file_info’ declared inside parameter list
Fuse.xs:482: warning: ‘struct fuse_file_info’ declared inside parameter list
Fuse.xs:507: warning: ‘struct statvfs’ declared inside parameter list
Fuse.xs: In function ‘_PLfuse_statfs’:
Fuse.xs:519: error: dereferencing pointer to incomplete type
Fuse.xs:520: error: dereferencing pointer to incomplete type
Fuse.xs:521: error: dereferencing pointer to incomplete type
Fuse.xs:522: error: dereferencing pointer to incomplete type
Fuse.xs:523: error: dereferencing pointer to incomplete type
Fuse.xs:524: error: dereferencing pointer to incomplete type
Fuse.xs:526: error: dereferencing pointer to incomplete type
Fuse.xs:527: error: dereferencing pointer to incomplete type
Fuse.xs:528: error: dereferencing pointer to incomplete type
Fuse.xs:529: error: dereferencing pointer to incomplete type
Fuse.xs:529: error: dereferencing pointer to incomplete type
Fuse.xs:530: error: dereferencing pointer to incomplete type
Fuse.xs:530: error: dereferencing pointer to incomplete type
Fuse.xs: At top level:
Fuse.xs:552: warning: ‘struct fuse_file_info’ declared inside parameter list
Fuse.xs:575: warning: ‘struct fuse_file_info’ declared inside parameter list
Fuse.xs: In function ‘_PLfuse_release’:
Fuse.xs:577: error: dereferencing pointer to incomplete type
Fuse.xs: At top level:
Fuse.xs:600: warning: ‘struct fuse_file_info’ declared inside parameter list
Fuse.xs: In function ‘_PLfuse_fsync’:
Fuse.xs:602: error: dereferencing pointer to incomplete type
Fuse.xs: At top level:
Fuse.xs:782: error: variable ‘_available_ops’ has initializer but incomplete type
Fuse.xs:783: error: unknown field ‘getattr’ specified in initializer
Fuse.xs:783: warning: excess elements in struct initializer
Fuse.xs:783: warning: (near initialization for ‘_available_ops’)
Fuse.xs:784: error: unknown field ‘readlink’ specified in initializer
Fuse.xs:784: warning: excess elements in struct initializer
Fuse.xs:784: warning: (near initialization for ‘_available_ops’)
Fuse.xs:785: error: unknown field ‘getdir’ specified in initializer
Fuse.xs:785: warning: excess elements in struct initializer
Fuse.xs:785: warning: (near initialization for ‘_available_ops’)
Fuse.xs:789: error: unknown field ‘mknod’ specified in initializer
Fuse.xs:789: warning: excess elements in struct initializer
Fuse.xs:789: warning: (near initialization for ‘_available_ops’)
Fuse.xs:790: error: unknown field ‘mkdir’ specified in initializer
Fuse.xs:790: warning: excess elements in struct initializer
Fuse.xs:790: warning: (near initialization for ‘_available_ops’)
Fuse.xs:791: error: unknown field ‘unlink’ specified in initializer
Fuse.xs:791: warning: excess elements in struct initializer
Fuse.xs:791: warning: (near initialization for ‘_available_ops’)
Fuse.xs:792: error: unknown field ‘rmdir’ specified in initializer
Fuse.xs:792: warning: excess elements in struct initializer
Fuse.xs:792: warning: (near initialization for ‘_available_ops’)
Fuse.xs:793: error: unknown field ‘symlink’ specified in initializer
Fuse.xs:793: warning: excess elements in struct initializer
Fuse.xs:793: warning: (near initialization for ‘_available_ops’)
Fuse.xs:794: error: unknown field ‘rename’ specified in initializer
Fuse.xs:794: warning: excess elements in struct initializer
Fuse.xs:794: warning: (near initialization for ‘_available_ops’)
Fuse.xs:795: error: unknown field ‘link’ specified in initializer
Fuse.xs:795: warning: excess elements in struct initializer
Fuse.xs:795: warning: (near initialization for ‘_available_ops’)
Fuse.xs:796: error: unknown field ‘chmod’ specified in initializer
Fuse.xs:796: warning: excess elements in struct initializer
Fuse.xs:796: warning: (near initialization for ‘_available_ops’)
Fuse.xs:797: error: unknown field ‘chown’ specified in initializer
Fuse.xs:797: warning: excess elements in struct initializer
Fuse.xs:797: warning: (near initialization for ‘_available_ops’)
Fuse.xs:798: error: unknown field ‘truncate’ specified in initializer
Fuse.xs:798: warning: excess elements in struct initializer
Fuse.xs:798: warning: (near initialization for ‘_available_ops’)
Fuse.xs:799: error: unknown field ‘utime’ specified in initializer
Fuse.xs:799: warning: excess elements in struct initializer
Fuse.xs:799: warning: (near initialization for ‘_available_ops’)
Fuse.xs:800: error: unknown field ‘open’ specified in initializer
Fuse.xs:800: warning: excess elements in struct initializer
Fuse.xs:800: warning: (near initialization for ‘_available_ops’)
Fuse.xs:801: error: unknown field ‘read’ specified in initializer
Fuse.xs:801: warning: excess elements in struct initializer
Fuse.xs:801: warning: (near initialization for ‘_available_ops’)
Fuse.xs:802: error: unknown field ‘write’ specified in initializer
Fuse.xs:802: warning: excess elements in struct initializer
Fuse.xs:802: warning: (near initialization for ‘_available_ops’)
Fuse.xs:803: error: unknown field ‘statfs’ specified in initializer
Fuse.xs:803: warning: excess elements in struct initializer
Fuse.xs:803: warning: (near initialization for ‘_available_ops’)
Fuse.xs:804: error: unknown field ‘flush’ specified in initializer
Fuse.xs:804: warning: excess elements in struct initializer
Fuse.xs:804: warning: (near initialization for ‘_available_ops’)
Fuse.xs:805: error: unknown field ‘release’ specified in initializer
Fuse.xs:805: warning: excess elements in struct initializer
Fuse.xs:805: warning: (near initialization for ‘_available_ops’)
Fuse.xs:806: error: unknown field ‘fsync’ specified in initializer
Fuse.xs:806: warning: excess elements in struct initializer
Fuse.xs:806: warning: (near initialization for ‘_available_ops’)
Fuse.xs:807: error: unknown field ‘setxattr’ specified in initializer
Fuse.xs:807: warning: excess elements in struct initializer
Fuse.xs:807: warning: (near initialization for ‘_available_ops’)
Fuse.xs:808: error: unknown field ‘getxattr’ specified in initializer
Fuse.xs:808: warning: excess elements in struct initializer
Fuse.xs:808: warning: (near initialization for ‘_available_ops’)
Fuse.xs:809: error: unknown field ‘listxattr’ specified in initializer
Fuse.xs:809: warning: excess elements in struct initializer
Fuse.xs:809: warning: (near initialization for ‘_available_ops’)
Fuse.xs:810: error: unknown field ‘removexattr’ specified in initializer
Fuse.xs:810: warning: excess elements in struct initializer
Fuse.xs:810: warning: (near initialization for ‘_available_ops’)
Fuse.xs: In function ‘XS_Fuse_fuse_get_context’:
Fuse.xs:821: warning: implicit declaration of function ‘fuse_get_context’
Fuse.xs:821: warning: assignment makes pointer from integer without a cast
Fuse.xs:824: error: dereferencing pointer to incomplete type
Fuse.xs:824: warning: value computed is not used
Fuse.xs:825: error: dereferencing pointer to incomplete type
Fuse.xs:825: warning: value computed is not used
Fuse.xs:826: error: dereferencing pointer to incomplete type
Fuse.xs:826: warning: value computed is not used
Fuse.xs: In function ‘XS_Fuse_perl_fuse_main’:
Fuse.xs:837: error: variable ‘fops’ has initializer but incomplete type
Fuse.xs:838: warning: excess elements in struct initializer
Fuse.xs:838: warning: (near initialization for ‘fops’)
Fuse.xs:838: warning: excess elements in struct initializer
Fuse.xs:838: warning: (near initialization for ‘fops’)
Fuse.xs:838: warning: excess elements in struct initializer
Fuse.xs:838: warning: (near initialization for ‘fops’)
Fuse.xs:838: warning: excess elements in struct initializer
Fuse.xs:838: warning: (near initialization for ‘fops’)
Fuse.xs:838: warning: excess elements in struct initializer
Fuse.xs:838: warning: (near initialization for ‘fops’)
Fuse.xs:838: warning: excess elements in struct initializer
Fuse.xs:838: warning: (near initialization for ‘fops’)
Fuse.xs:838: warning: excess elements in struct initializer
Fuse.xs:838: warning: (near initialization for ‘fops’)
Fuse.xs:838: warning: excess elements in struct initializer
Fuse.xs:838: warning: (near initialization for ‘fops’)
Fuse.xs:838: warning: excess elements in struct initializer
Fuse.xs:838: warning: (near initialization for ‘fops’)
Fuse.xs:838: warning: excess elements in struct initializer
Fuse.xs:838: warning: (near initialization for ‘fops’)
Fuse.xs:838: warning: excess elements in struct initializer
Fuse.xs:838: warning: (near initialization for ‘fops’)
Fuse.xs:838: warning: excess elements in struct initializer
Fuse.xs:838: warning: (near initialization for ‘fops’)
Fuse.xs:838: warning: excess elements in struct initializer
Fuse.xs:838: warning: (near initialization for ‘fops’)
Fuse.xs:839: warning: excess elements in struct initializer
Fuse.xs:839: warning: (near initialization for ‘fops’)
Fuse.xs:839: warning: excess elements in struct initializer
Fuse.xs:839: warning: (near initialization for ‘fops’)
Fuse.xs:839: warning: excess elements in struct initializer
Fuse.xs:839: warning: (near initialization for ‘fops’)
Fuse.xs:839: warning: excess elements in struct initializer
Fuse.xs:839: warning: (near initialization for ‘fops’)
Fuse.xs:839: warning: excess elements in struct initializer
Fuse.xs:839: warning: (near initialization for ‘fops’)
Fuse.xs:839: warning: excess elements in struct initializer
Fuse.xs:839: warning: (near initialization for ‘fops’)
Fuse.xs:839: warning: excess elements in struct initializer
Fuse.xs:839: warning: (near initialization for ‘fops’)
Fuse.xs:839: warning: excess elements in struct initializer
Fuse.xs:839: warning: (near initialization for ‘fops’)
Fuse.xs:839: warning: excess elements in struct initializer
Fuse.xs:839: warning: (near initialization for ‘fops’)
Fuse.xs:839: warning: excess elements in struct initializer
Fuse.xs:839: warning: (near initialization for ‘fops’)
Fuse.xs:839: warning: excess elements in struct initializer
Fuse.xs:839: warning: (near initialization for ‘fops’)
Fuse.xs:839: warning: excess elements in struct initializer
Fuse.xs:839: warning: (near initialization for ‘fops’)
Fuse.xs:837: error: storage size of ‘fops’ isn’t known
Fuse.xs:843: error: variable ‘margs’ has initializer but incomplete type
Fuse.xs:843: warning: implicit declaration of function ‘FUSE_ARGS_INIT’
Fuse.xs:843: error: storage size of ‘margs’ isn’t known
Fuse.xs:844: error: variable ‘fargs’ has initializer but incomplete type
Fuse.xs:844: error: storage size of ‘fargs’ isn’t known
Fuse.xs:890: warning: implicit declaration of function ‘fuse_opt_add_arg’
Fuse.xs:893: warning: implicit declaration of function ‘fuse_opt_free_args’
Fuse.xs:896: warning: implicit declaration of function ‘fuse_mount’
Fuse.xs:912: warning: implicit declaration of function ‘fuse_loop_mt’
Fuse.xs:912: warning: implicit declaration of function ‘fuse_new’
Fuse.xs:914: warning: implicit declaration of function ‘fuse_loop’
Fuse.xs:844: warning: unused variable ‘fargs’
Fuse.xs:843: warning: unused variable ‘margs’
Fuse.xs:837: warning: unused variable ‘fops’
make: *** [Fuse.o] Error 1

------------------------------
PREREQUISITES
------------------------------

Prerequisite modules loaded:

    No requirements found

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    LANG = en_US.UTF-8
    PATH = /usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/home/ct/bin
    PERL5LIB = 
    PERL5OPT = 
    PERL5_CPANPLUS_IS_RUNNING = 5608
    PERL5_CPAN_IS_EXECUTING = /home/ct/test/perl-5.10.0/.cpan/build/Fuse-0.09_3-_f5neF/Makefile.PL
    PERL5_CPAN_IS_RUNNING = 5608
    PERL5_CPAN_IS_RUNNING_IN_RECURSION = 26817,5608
    PERL_CR_SMOKER_CURRENT = Fuse-0.09_3
    PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
    PERL_MM_USE_DEFAULT = 1
    SHELL = /bin/bash
    TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

    $^X = /home/ct/test/perl-5.10.0/bin/perl
    $UID/$EUID = 500 / 500
    $GID = 500 500
    $EGID = 500 500

Perl module toolchain versions installed:

    Module              Have  
    ------------------- ------
    CPAN                1.9301
    Cwd                 3.29  
    ExtUtils::CBuilder  0.24  
    ExtUtils::Command   1.15  
    ExtUtils::Install   1.52  
    ExtUtils::MakeMaker 6.48  
    ExtUtils::Manifest  1.55  
    ExtUtils::ParseXS   2.19  
    File::Spec          3.29  
    Module::Build       0.30  
    Module::Signature   0.55  
    Test::Harness       3.14  
    Test::More          0.84  
    YAML                0.68  
    YAML::Syck          1.05  
    version             0.76  


--

Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
  Platform:
    osname=linux, osvers=2.6.18-92.el5, archname=s390x-linux
    uname='linux cpan02.zseries.org 2.6.18-92.el5 #1 smp tue apr 29 13:16:58 edt 2008 s390x s390x s390x gnulinux '
    config_args='-Dprefix=/home/ct/test/perl-5.10.0 -de'
    hint=recommended, useposix=true, d_sigaction=define
    useithreads=undef, usemultiplicity=undef
    useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
    use64bitint=define, use64bitall=define, uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm',
    optimize='-O2',
    cppflags='-fno-strict-aliasing -pipe -I/usr/local/include -I/usr/include/gdbm'
    ccversion='', gccversion='4.1.2 20071124 (Red Hat 4.1.2-42)', gccosandvers=''
    intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=87654321
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
    ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=8, prototype=define
  Linker and Libraries:
    ld='cc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib /lib64 /usr/lib64 /usr/local/lib64
    libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lc
    perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc
    libc=/lib/libc-2.5.so, so=so, useshrplib=false, libperl=libperl.a
    gnulibc_version='2.5'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
    cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib'

• UNKNOWN Fuse-0.09_3 s390x-linux 2.6.18-92.el5 by Oliver Paukstadt