Front page | perl.cpan.testers |
Postings from March 2008
FAIL Parallel-SubFork-0.04 i386-netbsd-thread-multi-64int 3.1
Thread Previous
|
Thread Next
From:
chris
Date:
March 15, 2008 23:03
Subject:
FAIL Parallel-SubFork-0.04 i386-netbsd-thread-multi-64int 3.1
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear POTYL,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.80. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Sun Mar 16 06:01:15 2008] Trying to get 'http://www.cpan.org/authors/id/P/PO/POTYL/CHECKSUMS'
[MSG] [Sun Mar 16 06:01:16 2008] Checksum matches for 'Parallel-SubFork-0.04.tar.gz'
[MSG] [Sun Mar 16 06:01:17 2008] Extracted 'Parallel-SubFork-0.04/'
[MSG] [Sun Mar 16 06:01:17 2008] Extracted 'Parallel-SubFork-0.04/Changes'
[MSG] [Sun Mar 16 06:01:17 2008] Extracted 'Parallel-SubFork-0.04/lib/'
[MSG] [Sun Mar 16 06:01:17 2008] Extracted 'Parallel-SubFork-0.04/lib/Parallel/'
[MSG] [Sun Mar 16 06:01:17 2008] Extracted 'Parallel-SubFork-0.04/lib/Parallel/SubFork/'
[MSG] [Sun Mar 16 06:01:17 2008] Extracted 'Parallel-SubFork-0.04/lib/Parallel/SubFork/Task.pm'
[MSG] [Sun Mar 16 06:01:17 2008] Extracted 'Parallel-SubFork-0.04/lib/Parallel/SubFork.pm'
[MSG] [Sun Mar 16 06:01:17 2008] Extracted 'Parallel-SubFork-0.04/examples/'
[MSG] [Sun Mar 16 06:01:17 2008] Extracted 'Parallel-SubFork-0.04/examples/simple.pl'
[MSG] [Sun Mar 16 06:01:17 2008] Extracted 'Parallel-SubFork-0.04/t/'
[MSG] [Sun Mar 16 06:01:17 2008] Extracted 'Parallel-SubFork-0.04/t/00-distribution.t'
[MSG] [Sun Mar 16 06:01:17 2008] Extracted 'Parallel-SubFork-0.04/t/00-pod-coverage.t'
[MSG] [Sun Mar 16 06:01:17 2008] Extracted 'Parallel-SubFork-0.04/t/01-wrong-usage.t'
[MSG] [Sun Mar 16 06:01:17 2008] Extracted 'Parallel-SubFork-0.04/t/Tsemaphore.pm'
[MSG] [Sun Mar 16 06:01:17 2008] Extracted 'Parallel-SubFork-0.04/t/01-task.t'
[MSG] [Sun Mar 16 06:01:17 2008] Extracted 'Parallel-SubFork-0.04/t/00-signature.t'
[MSG] [Sun Mar 16 06:01:17 2008] Extracted 'Parallel-SubFork-0.04/t/01-manager.t'
[MSG] [Sun Mar 16 06:01:17 2008] Extracted 'Parallel-SubFork-0.04/t/01-exit.t'
[MSG] [Sun Mar 16 06:01:17 2008] Extracted 'Parallel-SubFork-0.04/META.yml'
[MSG] [Sun Mar 16 06:01:17 2008] Extracted 'Parallel-SubFork-0.04/MANIFEST'
[MSG] [Sun Mar 16 06:01:17 2008] Extracted 'Parallel-SubFork-0.04/Makefile.PL'
[MSG] [Sun Mar 16 06:01:17 2008] Extracted 'Parallel-SubFork-0.04/README'
[MSG] [Sun Mar 16 06:01:17 2008] Extracted 'Parallel::SubFork' to '/home/cpan/perl584/.cpanplus/5.8.4/build/Parallel-SubFork-0.04'
[MSG] [Sun Mar 16 06:01:19 2008] Checking if your kit is complete...
Looks good
Warning: prerequisite Class::Accessor::Fast 0 not found.
Warning: prerequisite Test::Pod 0 not found.
Writing Makefile for Parallel::SubFork
[MSG] [Sun Mar 16 06:01:19 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Sun Mar 16 06:01:19 2008] Module 'Parallel::SubFork' requires 'Class::Accessor::Fast' version '0' to be installed
[MSG] [Sun Mar 16 06:01:19 2008] Module 'Parallel::SubFork' requires 'Test::Pod' version '0' to be installed
[MSG] [Sun Mar 16 06:01:19 2008] Trying to get 'http://www.cpan.org/authors/id/K/KA/KASEI/CHECKSUMS'
[MSG] [Sun Mar 16 06:01:20 2008] Checksum matches for 'Class-Accessor-0.31.tar.gz'
[MSG] [Sun Mar 16 06:01:21 2008] Extracted 'Class-Accessor-0.31/'
[MSG] [Sun Mar 16 06:01:21 2008] Extracted 'Class-Accessor-0.31/t/'
[MSG] [Sun Mar 16 06:01:21 2008] Extracted 'Class-Accessor-0.31/t/croak.t'
[MSG] [Sun Mar 16 06:01:21 2008] Extracted 'Class-Accessor-0.31/t/bestpractice.t'
[MSG] [Sun Mar 16 06:01:21 2008] Extracted 'Class-Accessor-0.31/t/getset.t'
[MSG] [Sun Mar 16 06:01:21 2008] Extracted 'Class-Accessor-0.31/t/aliases.t'
[MSG] [Sun Mar 16 06:01:21 2008] Extracted 'Class-Accessor-0.31/t/accessors.t'
[MSG] [Sun Mar 16 06:01:21 2008] Extracted 'Class-Accessor-0.31/lib/'
[MSG] [Sun Mar 16 06:01:21 2008] Extracted 'Class-Accessor-0.31/lib/Class/'
[MSG] [Sun Mar 16 06:01:21 2008] Extracted 'Class-Accessor-0.31/lib/Class/Accessor/'
[MSG] [Sun Mar 16 06:01:21 2008] Extracted 'Class-Accessor-0.31/lib/Class/Accessor/Faster.pm'
[MSG] [Sun Mar 16 06:01:21 2008] Extracted 'Class-Accessor-0.31/lib/Class/Accessor/Fast.pm'
[MSG] [Sun Mar 16 06:01:21 2008] Extracted 'Class-Accessor-0.31/lib/Class/Accessor.pm'
[MSG] [Sun Mar 16 06:01:21 2008] Extracted 'Class-Accessor-0.31/README'
[MSG] [Sun Mar 16 06:01:21 2008] Extracted 'Class-Accessor-0.31/Changes'
[MSG] [Sun Mar 16 06:01:22 2008] Extracted 'Class-Accessor-0.31/Makefile.PL'
[MSG] [Sun Mar 16 06:01:22 2008] Extracted 'Class-Accessor-0.31/META.yml'
[MSG] [Sun Mar 16 06:01:22 2008] Extracted 'Class-Accessor-0.31/INSTALL'
[MSG] [Sun Mar 16 06:01:22 2008] Extracted 'Class-Accessor-0.31/examples/'
[MSG] [Sun Mar 16 06:01:22 2008] Extracted 'Class-Accessor-0.31/examples/benchmark'
[MSG] [Sun Mar 16 06:01:22 2008] Extracted 'Class-Accessor-0.31/MANIFEST'
[MSG] [Sun Mar 16 06:01:22 2008] Extracted 'Class::Accessor::Fast' to '/home/cpan/perl584/.cpanplus/5.8.4/build/Class-Accessor-0.31'
[MSG] [Sun Mar 16 06:01:23 2008] Writing Makefile for Class::Accessor
[MSG] [Sun Mar 16 06:01:23 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Sun Mar 16 06:01:25 2008] Manifying blib/man3/Class::Accessor::Fast.3
Manifying blib/man3/Class::Accessor::Faster.3
Manifying blib/man3/Class::Accessor.3
[MSG] [Sun Mar 16 06:01:29 2008] MAKE TEST passed: PERL_DL_NONLAZY=1 /home/cpan/perl584/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/accessors.......ok
t/aliases.........ok
t/bestpractice....ok
t/croak...........ok
t/getset..........ok
All tests successful.
Files=5, Tests=119, 3 wallclock secs ( 0.66 cusr + 0.15 csys = 0.81 CPU)
[MSG] [Sun Mar 16 06:01:30 2008] Ok, not sending test report
[MSG] [Sun Mar 16 06:01:30 2008] Trying to get 'http://www.cpan.org/authors/id/P/PE/PETDANCE/CHECKSUMS'
[MSG] [Sun Mar 16 06:01:32 2008] Checksum matches for 'Test-Pod-1.26.tar.gz'
[MSG] [Sun Mar 16 06:01:33 2008] Extracted 'Test-Pod-1.26/'
[MSG] [Sun Mar 16 06:01:33 2008] Extracted 'Test-Pod-1.26/t/'
[MSG] [Sun Mar 16 06:01:33 2008] Extracted 'Test-Pod-1.26/t/spaced-directives.pod'
[MSG] [Sun Mar 16 06:01:33 2008] Extracted 'Test-Pod-1.26/t/unknown-directive.t'
[MSG] [Sun Mar 16 06:01:33 2008] Extracted 'Test-Pod-1.26/t/spaced-directives.t'
[MSG] [Sun Mar 16 06:01:33 2008] Extracted 'Test-Pod-1.26/t/pod/'
[MSG] [Sun Mar 16 06:01:33 2008] Extracted 'Test-Pod-1.26/t/pod/good-pod-script'
[MSG] [Sun Mar 16 06:01:33 2008] Extracted 'Test-Pod-1.26/t/pod/no_pod.pod'
[MSG] [Sun Mar 16 06:01:33 2008] Extracted 'Test-Pod-1.26/t/pod/good.pod'
[MSG] [Sun Mar 16 06:01:33 2008] Extracted 'Test-Pod-1.26/t/empty-file.pod'
[MSG] [Sun Mar 16 06:01:33 2008] Extracted 'Test-Pod-1.26/t/cut-outside-block.pod'
[MSG] [Sun Mar 16 06:01:33 2008] Extracted 'Test-Pod-1.26/t/good.t'
[MSG] [Sun Mar 16 06:01:33 2008] Extracted 'Test-Pod-1.26/t/item-ordering.pod'
[MSG] [Sun Mar 16 06:01:33 2008] Extracted 'Test-Pod-1.26/t/all_pod_files.t'
[MSG] [Sun Mar 16 06:01:33 2008] Extracted 'Test-Pod-1.26/t/selftest.t'
[MSG] [Sun Mar 16 06:01:33 2008] Extracted 'Test-Pod-1.26/t/unknown-directive.pod'
[MSG] [Sun Mar 16 06:01:34 2008] Extracted 'Test-Pod-1.26/t/item-ordering.t'
[MSG] [Sun Mar 16 06:01:34 2008] Extracted 'Test-Pod-1.26/t/00-load.t'
[MSG] [Sun Mar 16 06:01:34 2008] Extracted 'Test-Pod-1.26/t/load.t'
[MSG] [Sun Mar 16 06:01:34 2008] Extracted 'Test-Pod-1.26/t/missing-file.t'
[MSG] [Sun Mar 16 06:01:34 2008] Extracted 'Test-Pod-1.26/t/pod.t'
[MSG] [Sun Mar 16 06:01:34 2008] Extracted 'Test-Pod-1.26/t/cut-outside-block.t'
[MSG] [Sun Mar 16 06:01:34 2008] Extracted 'Test-Pod-1.26/Changes'
[MSG] [Sun Mar 16 06:01:34 2008] Extracted 'Test-Pod-1.26/MANIFEST'
[MSG] [Sun Mar 16 06:01:34 2008] Extracted 'Test-Pod-1.26/Pod.pm'
[MSG] [Sun Mar 16 06:01:34 2008] Extracted 'Test-Pod-1.26/Makefile.PL'
[MSG] [Sun Mar 16 06:01:34 2008] Extracted 'Test-Pod-1.26/META.yml'
[MSG] [Sun Mar 16 06:01:34 2008] Extracted 'Test::Pod' to '/home/cpan/perl584/.cpanplus/5.8.4/build/Test-Pod-1.26'
[MSG] [Sun Mar 16 06:01:36 2008] Writing Makefile for Test::Pod
[MSG] [Sun Mar 16 06:01:36 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Sun Mar 16 06:01:37 2008] Manifying blib/man3/Test::Pod.3
[MSG] [Sun Mar 16 06:01:47 2008] MAKE TEST passed: PERL_DL_NONLAZY=1 /home/cpan/perl584/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00-load..............# Testing Test::Pod 1.26, Perl 5.008004, /home/cpan/perl584/bin/perl
ok
t/all_pod_files........ok
t/cut-outside-block....ok
t/good.................ok
t/item-ordering........ok
t/load.................ok
t/missing-file.........ok
t/pod..................ok
t/selftest.............ok
t/spaced-directives....skipped
all skipped: Not written yet
t/unknown-directive....ok
All tests successful, 1 test skipped.
Files=11, Tests=19, 8 wallclock secs ( 2.62 cusr + 0.27 csys = 2.89 CPU)
[MSG] [Sun Mar 16 06:01:47 2008] Ok, not sending test report
[MSG] [Sun Mar 16 06:01:52 2008] cp lib/Parallel/SubFork.pm blib/lib/Parallel/SubFork.pm
cp lib/Parallel/SubFork/Task.pm blib/lib/Parallel/SubFork/Task.pm
Manifying blib/man3/Parallel::SubFork::Task.3
Manifying blib/man3/Parallel::SubFork.3
[ERROR] [Sun Mar 16 06:01:59 2008] MAKE TEST failed: PERL_DL_NONLAZY=1 /home/cpan/perl584/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00-distribution....skipped
all skipped: Test::Distribution not installed
t/00-pod-coverage....ok
t/00-signature.......skipped
all skipped: Set the environment variable TEST_SIGNATURE to enable this test.
t/01-exit............ok
t/01-manager.........
# Failed test 'The object isa IPC::Semaphore'
# at /home/cpan/perl584/.cpanplus/5.8.4/build/Parallel-SubFork-0.04/t/Tsemaphore.pm line 71.
# The object isn't defined
Can't call method "setall" on an undefined value at /home/cpan/perl584/.cpanplus/5.8.4/build/Parallel-SubFork-0.04/t/Tsemaphore.pm line 82.
# Looks like you planned 21 tests but only ran 2.
# Looks like you failed 1 test of 2 run.
# Looks like your test died just after 2.
dubious
Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED tests 2-21
Failed 20/21 tests, 4.76% okay
t/01-task............
# Failed test 'The object isa IPC::Semaphore'
# at /home/cpan/perl584/.cpanplus/5.8.4/build/Parallel-SubFork-0.04/t/Tsemaphore.pm line 71.
# The object isn't defined
Can't call method "setall" on an undefined value at /home/cpan/perl584/.cpanplus/5.8.4/build/Parallel-SubFork-0.04/t/Tsemaphore.pm line 82.
# Looks like you planned 32 tests but only ran 9.
# Looks like you failed 1 test of 9 run.
# Looks like your test died just after 9.
dubious
Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED tests 9-32
Failed 24/32 tests, 25.00% okay
t/01-wrong-usage.....ok
Failed Test Stat Wstat Total Fail List of Failed
-------------------------------------------------------------------------------
t/01-manager.t 255 65280 21 39 2-21
t/01-task.t 255 65280 32 47 9-32
2 tests skipped.
Failed 2/7 test scripts. 44/138 subtests failed.
Files=7, Tests=138, 6 wallclock secs ( 1.43 cusr + 0.25 csys = 1.68 CPU)
Failed 2/7 test programs. 44/138 subtests failed.
gmake:
[MSG] [Sun Mar 16 06:01:59 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Carp 1.02 0
Class::Accessor::Fast 0.31 0
FindBin 1.44 0
IPC::Semaphore 1.02 0
IPC::SysV 1.04 0
POSIX 1.08 0
Test::More 0.70 0
Test::Pod 1.26 0
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPAN::YACSmoke 0.0307.
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
PATH = /home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/bin:/usr/local/sbin
PERL5LIB = :/home/cpan/perl584/.cpanplus/5.8.4/build/Class-Accessor-0.31/blib/lib:/home/cpan/perl584/.cpanplus/5.8.4/build/Class-Accessor-0.31/blib/arch:/home/cpan/perl584/.cpanplus/5.8.4/build/Class-Accessor-0.31/blib:/home/cpan/perl584/.cpanplus/5.8.4/build/Class-Accessor-0.31/blib/lib:/home/cpan/perl584/.cpanplus/5.8.4/build/Class-Accessor-0.31/blib/arch:/home/cpan/perl584/.cpanplus/5.8.4/build/Class-Accessor-0.31/blib:/home/cpan/perl584/.cpanplus/5.8.4/build/Test-Pod-1.26/blib/lib:/home/cpan/perl584/.cpanplus/5.8.4/build/Test-Pod-1.26/blib/arch:/home/cpan/perl584/.cpanplus/5.8.4/build/Test-Pod-1.26/blib:/home/cpan/perl584/.cpanplus/5.8.4/build/Test-Pod-1.26/blib/lib:/home/cpan/perl584/.cpanplus/5.8.4/build/Test-Pod-1.26/blib/arch:/home/cpan/perl584/.cpanplus/5.8.4/build/Test-Pod-1.26/blib:/home/cpan/perl584/.cpanplus/5.8.4/build/Parallel-SubFork-0.04/blib/lib:/home/cpan/perl584/.cpanplus/5.8.4/build/Parallel-SubFork-0.04/blib/arch:/home/cpan/perl584/.cpanplus/5.8.4/build/Parallel-SubFork-0.04/blib
PERL5_CPANPLUS_IS_RUNNING = 40
PERL5_CPANPLUS_IS_VERSION = 0.80
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/pkg/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/perl584/bin/perl
UID: $< = 1002
EUID: $> = 1002
GID: $( = 100 100
EGID: $) = 100 100
-------------------------------
--
Summary of my perl5 (revision 5 version 8 subversion 4) configuration:
Platform:
osname=netbsd, osvers=3.1, archname=i386-netbsd-thread-multi-64int
uname='netbsd canker.bingosnet.co.uk 3.1 netbsd 3.1 (generic_laptop) #0: tue oct 31 04:32:05 utc 2006 builds@b0.netbsd.org:homebuildsabnetbsd-3-1-releasei386200610302053z-objhomebuildsabnetbsd-3-1-releasesrcsysarchi386compilegeneric_laptop i386 '
config_args=''
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=undef uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fno-strict-aliasing -I/usr/pkg/include',
optimize='-O',
cppflags='-fno-strict-aliasing -I/usr/pkg/include'
ccversion='', gccversion='3.3.3 (NetBSD nb3 20040520)', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -Wl,-rpath,/usr/pkg/lib -Wl,-rpath,/usr/local/lib -L/usr/pkg/lib'
libpth=/usr/pkg/lib /lib /usr/lib
libs=-lgdbm -lm -lcrypt -lutil -lc -lposix -lpthread
perllibs=-lm -lcrypt -lutil -lc -lposix -lpthread
libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E '
cccdlflags='-DPIC -fPIC ', lddlflags='--whole-archive -shared -L/usr/pkg/lib'
Thread Previous
|
Thread Next