FAIL Data-Dump-1.08 OpenBSD.i386-openbsd-thread-multi 4.2

This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/


--

Dear Gisle Aas,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Sun Jul 27 21:33:03 2008] Manifying blib/man3/Class::Inspector.3

[MSG] [Sun Jul 27 21:33:03 2008] Sending test report for 'Class-Inspector-1.23'
[MSG] [Sun Jul 27 21:33:04 2008] Ok, not sending test report
[MSG] [Sun Jul 27 21:33:09 2008] Trying to get 'ftp://ftp.funet.fi/pub/CPAN/authors/id/G/GA/GAAS/CHECKSUMS'
[MSG] [Sun Jul 27 21:33:11 2008] Checksum matches for 'Data-Dump-1.08.tar.gz'
[MSG] [Sun Jul 27 21:33:12 2008] Extracted 'Data-Dump-1.08/'
[MSG] [Sun Jul 27 21:33:12 2008] Extracted 'Data-Dump-1.08/t/'
[MSG] [Sun Jul 27 21:33:12 2008] Extracted 'Data-Dump-1.08/t/quote-unicode.t'
[MSG] [Sun Jul 27 21:33:12 2008] Extracted 'Data-Dump-1.08/t/regexp.t'
[MSG] [Sun Jul 27 21:33:12 2008] Extracted 'Data-Dump-1.08/t/scalar-obj.t'
[MSG] [Sun Jul 27 21:33:12 2008] Extracted 'Data-Dump-1.08/t/eval.t'
[MSG] [Sun Jul 27 21:33:12 2008] Extracted 'Data-Dump-1.08/t/tied.t'
[MSG] [Sun Jul 27 21:33:12 2008] Extracted 'Data-Dump-1.08/t/scalar.t'
[MSG] [Sun Jul 27 21:33:12 2008] Extracted 'Data-Dump-1.08/t/dump.t'
[MSG] [Sun Jul 27 21:33:13 2008] Extracted 'Data-Dump-1.08/t/quote.t'
[MSG] [Sun Jul 27 21:33:13 2008] Extracted 'Data-Dump-1.08/t/glob.t'
[MSG] [Sun Jul 27 21:33:13 2008] Extracted 'Data-Dump-1.08/t/ref.t'
[MSG] [Sun Jul 27 21:33:13 2008] Extracted 'Data-Dump-1.08/README'
[MSG] [Sun Jul 27 21:33:13 2008] Extracted 'Data-Dump-1.08/MANIFEST'
[MSG] [Sun Jul 27 21:33:13 2008] Extracted 'Data-Dump-1.08/Changes'
[MSG] [Sun Jul 27 21:33:13 2008] Extracted 'Data-Dump-1.08/lib/'
[MSG] [Sun Jul 27 21:33:13 2008] Extracted 'Data-Dump-1.08/lib/Data/'
[MSG] [Sun Jul 27 21:33:14 2008] Extracted 'Data-Dump-1.08/lib/Data/Dump.pm'
[MSG] [Sun Jul 27 21:33:14 2008] Extracted 'Data-Dump-1.08/Makefile.PL'
[MSG] [Sun Jul 27 21:33:14 2008] Extracted 'Data::Dump' to '/home/cpan/blead/.cpanplus/5.11.0/build/Data-Dump-1.08'
[MSG] [Sun Jul 27 21:33:16 2008] Checking if your kit is complete...
Looks good
Writing Makefile for Data::Dump

[MSG] [Sun Jul 27 21:33:16 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Sun Jul 27 21:33:17 2008] Checking for previous PASS result for "Data-Dump-1.08"
[MSG] [Sun Jul 27 21:33:26 2008] cp lib/Data/Dump.pm blib/lib/Data/Dump.pm
Manifying blib/man3/Data::Dump.3

[ERROR] [Sun Jul 27 21:33:40 2008] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /home/cpan/blead/bin/perl5.11.0 "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/dump...............ok
t/eval...............ok
t/glob...............ok
t/quote-unicode......ok
t/quote..............ok
t/ref................ok
t/regexp.............Can't handle REGEXP data at /home/cpan/blead/.cpanplus/5.11.0/build/Data-Dump-1.08/blib/lib/Data/Dump.pm line 315.
Can't handle REGEXP data at /home/cpan/blead/.cpanplus/5.11.0/build/Data-Dump-1.08/blib/lib/Data/Dump.pm line 315.
Can't handle REGEXP data at /home/cpan/blead/.cpanplus/5.11.0/build/Data-Dump-1.08/blib/lib/Data/Dump.pm line 315.
Can't handle REGEXP data at /home/cpan/blead/.cpanplus/5.11.0/build/Data-Dump-1.08/blib/lib/Data/Dump.pm line 315.
Can't handle REGEXP data at /home/cpan/blead/.cpanplus/5.11.0/build/Data-Dump-1.08/blib/lib/Data/Dump.pm line 315.
Can't handle REGEXP data at /home/cpan/blead/.cpanplus/5.11.0/build/Data-Dump-1.08/blib/lib/Data/Dump.pm line 315.
Can't handle REGEXP data at /home/cpan/blead/.cpanplus/5.11.0/build/Data-Dump-1.08/blib/lib/Data/Dump.pm line 315.
Can't handle REGEXP data at /home/cpan/blead/.cpanplus/5.11.0/build/Data-Dump-1.08/blib/lib/Data/Dump.pm line 315.
Can't handle REGEXP data at /home/cpan/blead/.cpanplus/5.11.0/build/Data-Dump-1.08/blib/lib/Data/Dump.pm line 315.
 Failed 1/1 subtests 
t/scalar-obj.........ok
t/scalar.............ok
t/tied...............ok

Test Summary Report
-------------------
t/regexp.t       (Wstat: 0 Tests: 1 Failed: 1)
  Failed test:  1
Files=10, Tests=55, 11 wallclock secs ( 0.27 usr  0.33 sys +  1.13 cusr  1.48 csys =  3.21 CPU)
Result: FAIL
Failed 1/10 test programs. 1/55 subtests failed.
*** Error code 255

Stop in /home/cpan/blead/.cpanplus/5.11.0/build/Data-Dump-1.08 (line 756 of Makefile).

[MSG] [Sun Jul 27 21:33:40 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'


******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.02.

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    PATH = /home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbin:/usr/games:.
    PERL5LIB = :/home/cpan/blead/.cpanplus/5.11.0/build/CGI-Simple-1.105/blib/lib:/home/cpan/blead/.cpanplus/5.11.0/build/CGI-Simple-1.105/blib/arch:/home/cpan/blead/.cpanplus/5.11.0/build/CGI-Simple-1.105/blib:/home/cpan/blead/.cpanplus/5.11.0/build/CGI-Simple-1.105/blib/lib:/home/cpan/blead/.cpanplus/5.11.0/build/CGI-Simple-1.105/blib/arch:/home/cpan/blead/.cpanplus/5.11.0/build/CGI-Simple-1.105/blib:/home/cpan/blead/.cpanplus/5.11.0/build/Class-Accessor-0.31/blib/lib:/home/cpan/blead/.cpanplus/5.11.0/build/Class-Accessor-0.31/blib/arch:/home/cpan/blead/.cpanplus/5.11.0/build/Class-Accessor-0.31/blib:/home/cpan/blead/.cpanplus/5.11.0/build/Class-Accessor-0.31/blib/lib:/home/cpan/blead/.cpanplus/5.11.0/build/Class-Accessor-0.31/blib/arch:/home/cpan/blead/.cpanplus/5.11.0/build/Class-Accessor-0.31/blib:/home/cpan/blead/.cpanplus/5.11.0/build/Class-Data-Inheritable-0.08/blib/lib:/home/cpan/blead/.cpanplus/5.11.0/build/Class-Data-Inheritable-0.08/blib/arch:/home/cpan/blead/.cpanplus/5.11.0/build/Class-Data-Inheritable-0.08/blib:/home/cpan/blead/.cpanplus/5.11.0/build/Class-Data-Inheritable-0.08/blib/lib:/home/cpan/blead/.cpanplus/5.11.0/build/Class-Data-Inheritable-0.08/blib/arch:/home/cpan/blead/.cpanplus/5.11.0/build/Class-Data-Inheritable-0.08/blib:/home/cpan/blead/.cpanplus/5.11.0/build/Class-Inspector-1.23/blib/lib:/home/cpan/blead/.cpanplus/5.11.0/build/Class-Inspector-1.23/blib/arch:/home/cpan/blead/.cpanplus/5.11.0/build/Class-Inspector-1.23/blib:/home/cpan/blead/.cpanplus/5.11.0/build/Class-Inspector-1.23/blib/lib:/home/cpan/blead/.cpanplus/5.11.0/build/Class-Inspector-1.23/blib/arch:/home/cpan/blead/.cpanplus/5.11.0/build/Class-Inspector-1.23/blib:/home/cpan/blead/.cpanplus/5.11.0/build/Data-Dump-1.08/blib/lib:/home/cpan/blead/.cpanplus/5.11.0/build/Data-Dump-1.08/blib/arch:/home/cpan/blead/.cpanplus/5.11.0/build/Data-Dump-1.08/blib
    PERL5_CPANPLUS_IS_RUNNING = 19114
    PERL5_CPANPLUS_IS_VERSION = 0.84
    PERL5_CPANPLUS_VERBOSE = 1
    PERL_MM_USE_DEFAULT = 1
    SHELL = /bin/ksh
    TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

    Perl: $^X = /home/cpan/blead/bin/perl5.11.0
    UID:  $<  = 1000
    EUID: $>  = 1000
    GID:  $(  = 1000 1000 0
    EGID: $)  = 1000 1000 0


-------------------------------


--

Summary of my perl5 (revision 5 version 11 subversion 0 patch 34160) configuration:
  Platform:
    osname=openbsd, osvers=4.2, archname=OpenBSD.i386-openbsd-thread-multi
    uname='openbsd wynionyn.bingosnet.co.uk 4.2 generic#375 i386 '
    config_args='-de -Dusedevel -Dprefix=/home/cpan/blead -Dusethreads'
    hint=recommended, useposix=true, d_sigaction=define
    useithreads=define, usemultiplicity=define
    useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
    use64bitint=undef, use64bitall=undef, uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-pthread -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include',
    optimize='-O2',
    cppflags='-pthread -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
    ccversion='', gccversion='3.3.5 (propolice)', gccosandvers='openbsd4.2'
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
    ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=4, prototype=define
  Linker and Libraries:
    ld='cc', ldflags ='-pthread -Wl,-E  -fstack-protector -L/usr/local/lib'
    libpth=/usr/local/lib /usr/lib
    libs=-lm -lutil -lc
    perllibs=-lm -lutil -lc
    libc=/usr/lib/libc.so.41.0, so=so, useshrplib=false, libperl=libperl.a
    gnulibc_version=''
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '

• FAIL Data-Dump-1.08 OpenBSD.i386-openbsd-thread-multi 4.2 by chris