FAIL Data-Dump-1.08 i686-linux-thread-multi-ld 2.6.16.38

This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/


--

Dear Gisle Aas,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Tue Jul 22 00:04:49 2008] Manifying blib/man3/Class::Inspector.3

[MSG] [Tue Jul 22 00:04:49 2008] Sending test report for 'Class-Inspector-1.23'
[MSG] [Tue Jul 22 00:04:49 2008] Ok, not sending test report
[MSG] [Tue Jul 22 00:04:49 2008] Trying to get 'ftp://ftp.funet.fi/pub/CPAN/authors/id/G/GA/GAAS/Data-Dump-1.08.tar.gz'
[MSG] [Tue Jul 22 00:04:52 2008] Trying to get 'ftp://ftp.funet.fi/pub/CPAN/authors/id/G/GA/GAAS/CHECKSUMS'
[MSG] [Tue Jul 22 00:04:53 2008] Checksum matches for 'Data-Dump-1.08.tar.gz'
[MSG] [Tue Jul 22 00:04:53 2008] Extracted 'Data-Dump-1.08/'
[MSG] [Tue Jul 22 00:04:53 2008] Extracted 'Data-Dump-1.08/t/'
[MSG] [Tue Jul 22 00:04:53 2008] Extracted 'Data-Dump-1.08/t/quote-unicode.t'
[MSG] [Tue Jul 22 00:04:53 2008] Extracted 'Data-Dump-1.08/t/regexp.t'
[MSG] [Tue Jul 22 00:04:53 2008] Extracted 'Data-Dump-1.08/t/scalar-obj.t'
[MSG] [Tue Jul 22 00:04:53 2008] Extracted 'Data-Dump-1.08/t/eval.t'
[MSG] [Tue Jul 22 00:04:53 2008] Extracted 'Data-Dump-1.08/t/tied.t'
[MSG] [Tue Jul 22 00:04:53 2008] Extracted 'Data-Dump-1.08/t/scalar.t'
[MSG] [Tue Jul 22 00:04:53 2008] Extracted 'Data-Dump-1.08/t/dump.t'
[MSG] [Tue Jul 22 00:04:53 2008] Extracted 'Data-Dump-1.08/t/quote.t'
[MSG] [Tue Jul 22 00:04:53 2008] Extracted 'Data-Dump-1.08/t/glob.t'
[MSG] [Tue Jul 22 00:04:53 2008] Extracted 'Data-Dump-1.08/t/ref.t'
[MSG] [Tue Jul 22 00:04:53 2008] Extracted 'Data-Dump-1.08/README'
[MSG] [Tue Jul 22 00:04:53 2008] Extracted 'Data-Dump-1.08/MANIFEST'
[MSG] [Tue Jul 22 00:04:53 2008] Extracted 'Data-Dump-1.08/Changes'
[MSG] [Tue Jul 22 00:04:53 2008] Extracted 'Data-Dump-1.08/lib/'
[MSG] [Tue Jul 22 00:04:53 2008] Extracted 'Data-Dump-1.08/lib/Data/'
[MSG] [Tue Jul 22 00:04:53 2008] Extracted 'Data-Dump-1.08/lib/Data/Dump.pm'
[MSG] [Tue Jul 22 00:04:53 2008] Extracted 'Data-Dump-1.08/Makefile.PL'
[MSG] [Tue Jul 22 00:04:54 2008] Extracted 'Data::Dump' to '/home/cpan/blead/.cpanplus/5.11.0/build/Data-Dump-1.08'
[MSG] [Tue Jul 22 00:04:58 2008] Checking if your kit is complete...
Looks good
Writing Makefile for Data::Dump

[MSG] [Tue Jul 22 00:04:58 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Tue Jul 22 00:04:58 2008] Checking for previous PASS result for "Data-Dump-1.08"
[MSG] [Tue Jul 22 00:05:04 2008] cp lib/Data/Dump.pm blib/lib/Data/Dump.pm
Manifying blib/man3/Data::Dump.3

[ERROR] [Tue Jul 22 00:05:07 2008] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /home/cpan/blead/bin/perl5.11.0 "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/dump...............ok
t/eval...............ok
t/glob...............ok
t/quote-unicode......ok
t/quote..............ok
t/ref................ok
t/regexp.............Can't handle REGEXP data at /home/cpan/blead/.cpanplus/5.11.0/build/Data-Dump-1.08/blib/lib/Data/Dump.pm line 315.
Can't handle REGEXP data at /home/cpan/blead/.cpanplus/5.11.0/build/Data-Dump-1.08/blib/lib/Data/Dump.pm line 315.
Can't handle REGEXP data at /home/cpan/blead/.cpanplus/5.11.0/build/Data-Dump-1.08/blib/lib/Data/Dump.pm line 315.
Can't handle REGEXP data at /home/cpan/blead/.cpanplus/5.11.0/build/Data-Dump-1.08/blib/lib/Data/Dump.pm line 315.
Can't handle REGEXP data at /home/cpan/blead/.cpanplus/5.11.0/build/Data-Dump-1.08/blib/lib/Data/Dump.pm line 315.
Can't handle REGEXP data at /home/cpan/blead/.cpanplus/5.11.0/build/Data-Dump-1.08/blib/lib/Data/Dump.pm line 315.
Can't handle REGEXP data at /home/cpan/blead/.cpanplus/5.11.0/build/Data-Dump-1.08/blib/lib/Data/Dump.pm line 315.
Can't handle REGEXP data at /home/cpan/blead/.cpanplus/5.11.0/build/Data-Dump-1.08/blib/lib/Data/Dump.pm line 315.
Can't handle REGEXP data at /home/cpan/blead/.cpanplus/5.11.0/build/Data-Dump-1.08/blib/lib/Data/Dump.pm line 315.
 Failed 1/1 subtests 
t/scalar-obj.........ok
t/scalar.............ok
t/tied...............ok

Test Summary Report
-------------------
t/regexp.t       (Wstat: 0 Tests: 1 Failed: 1)
  Failed test:  1
Files=10, Tests=55,  2 wallclock secs ( 0.04 usr  0.14 sys +  0.66 cusr  0.28 csys =  1.12 CPU)
Result: FAIL
Failed 1/10 test programs. 1/55 subtests failed.
make: *** [test_dynamic] Error 255

[MSG] [Tue Jul 22 00:05:07 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'


******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.02.

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    LANG = en_GB.UTF-8
    PATH = /usr/local/bin:/bin:/usr/bin:/usr/X11/bin
    PERL5LIB = :/home/cpan/blead/.cpanplus/5.11.0/build/CGI-Simple-1.105/blib/lib:/home/cpan/blead/.cpanplus/5.11.0/build/CGI-Simple-1.105/blib/arch:/home/cpan/blead/.cpanplus/5.11.0/build/CGI-Simple-1.105/blib:/home/cpan/blead/.cpanplus/5.11.0/build/CGI-Simple-1.105/blib/lib:/home/cpan/blead/.cpanplus/5.11.0/build/CGI-Simple-1.105/blib/arch:/home/cpan/blead/.cpanplus/5.11.0/build/CGI-Simple-1.105/blib:/home/cpan/blead/.cpanplus/5.11.0/build/Class-Accessor-0.31/blib/lib:/home/cpan/blead/.cpanplus/5.11.0/build/Class-Accessor-0.31/blib/arch:/home/cpan/blead/.cpanplus/5.11.0/build/Class-Accessor-0.31/blib:/home/cpan/blead/.cpanplus/5.11.0/build/Class-Accessor-0.31/blib/lib:/home/cpan/blead/.cpanplus/5.11.0/build/Class-Accessor-0.31/blib/arch:/home/cpan/blead/.cpanplus/5.11.0/build/Class-Accessor-0.31/blib:/home/cpan/blead/.cpanplus/5.11.0/build/Class-Data-Inheritable-0.08/blib/lib:/home/cpan/blead/.cpanplus/5.11.0/build/Class-Data-Inheritable-0.08/blib/arch:/home/cpan/blead/.cpanplus/5.11.0/build/Class-Data-Inheritable-0.08/blib:/home/cpan/blead/.cpanplus/5.11.0/build/Class-Data-Inheritable-0.08/blib/lib:/home/cpan/blead/.cpanplus/5.11.0/build/Class-Data-Inheritable-0.08/blib/arch:/home/cpan/blead/.cpanplus/5.11.0/build/Class-Data-Inheritable-0.08/blib:/home/cpan/blead/.cpanplus/5.11.0/build/Class-Inspector-1.23/blib/lib:/home/cpan/blead/.cpanplus/5.11.0/build/Class-Inspector-1.23/blib/arch:/home/cpan/blead/.cpanplus/5.11.0/build/Class-Inspector-1.23/blib:/home/cpan/blead/.cpanplus/5.11.0/build/Class-Inspector-1.23/blib/lib:/home/cpan/blead/.cpanplus/5.11.0/build/Class-Inspector-1.23/blib/arch:/home/cpan/blead/.cpanplus/5.11.0/build/Class-Inspector-1.23/blib:/home/cpan/blead/.cpanplus/5.11.0/build/Data-Dump-1.08/blib/lib:/home/cpan/blead/.cpanplus/5.11.0/build/Data-Dump-1.08/blib/arch:/home/cpan/blead/.cpanplus/5.11.0/build/Data-Dump-1.08/blib
    PERL5_CPANPLUS_IS_RUNNING = 22102
    PERL5_CPANPLUS_IS_VERSION = 0.84
    PERL5_CPANPLUS_VERBOSE = 1
    PERL_MM_USE_DEFAULT = 1
    SHELL = /bin/bash
    TERM = screen.linux

Perl special variables (and OS-specific diagnostics, for MSWin32):

    Perl: $^X = /home/cpan/blead/bin/perl5.11.0
    UID:  $<  = 1000
    EUID: $>  = 1000
    GID:  $(  = 100 100
    EGID: $)  = 100 100


-------------------------------


--

Summary of my perl5 (revision 5 version 11 subversion 0 patch 34151) configuration:
  Platform:
    osname=linux, osvers=2.6.16.38, archname=i686-linux-thread-multi-ld
    uname='linux scratch 2.6.16.38 #1 preempt thu feb 22 16:04:10 gmt 2007 i686 athlon-4 i386 gnulinux '
    config_args='-de -Dusedevel -Dprefix=/home/cpan/blead -Dusethreads -Duselongdouble'
    hint=recommended, useposix=true, d_sigaction=define
    useithreads=define, usemultiplicity=define
    useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
    use64bitint=undef, use64bitall=undef, uselongdouble=define
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
    optimize='-O2',
    cppflags='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -I/usr/local/include'
    ccversion='', gccversion='4.0.3', gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
    ivtype='long', ivsize=4, nvtype='long double', nvsize=12, Off_t='off_t', lseeksize=8
    alignbytes=4, prototype=define
  Linker and Libraries:
    ld='cc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib
    libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc -lgdbm_compat
    perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
    libc=/lib/libc-2.3.6.so, so=so, useshrplib=false, libperl=libperl.a
    gnulibc_version='2.3.6'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'

• FAIL Data-Dump-1.08 i686-linux-thread-multi-ld 2.6.16.38 by chris