Front page | perl.cpan.testers |
Postings from July 2008
FAIL BDB-Wrapper-0.15 i686-linux-thread-multi-64int-ld 2.6.16.38
Thread Next
From:
chris
Date:
July 8, 2008 04:09
Subject:
FAIL BDB-Wrapper-0.15 i686-linux-thread-multi-64int-ld 2.6.16.38
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear HIKARINE,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.83_08. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Tue Jul 8 11:09:01 2008] Trying to get 'ftp://ftp.funet.fi/pub/languages/perl/CPAN/authors/id/H/HI/HIKARINE/CHECKSUMS'
[MSG] [Tue Jul 8 11:09:03 2008] Checksum matches for 'BDB-Wrapper-0.15.tar.gz'
[MSG] [Tue Jul 8 11:09:03 2008] Extracted 'BDB-Wrapper-0.15/'
[MSG] [Tue Jul 8 11:09:03 2008] Extracted 'BDB-Wrapper-0.15/Changes'
[MSG] [Tue Jul 8 11:09:03 2008] Extracted 'BDB-Wrapper-0.15/lib/'
[MSG] [Tue Jul 8 11:09:03 2008] Extracted 'BDB-Wrapper-0.15/lib/BDB/'
[MSG] [Tue Jul 8 11:09:03 2008] Extracted 'BDB-Wrapper-0.15/lib/BDB/Wrapper.pm'
[MSG] [Tue Jul 8 11:09:03 2008] Extracted 'BDB-Wrapper-0.15/Makefile.PL'
[MSG] [Tue Jul 8 11:09:03 2008] Extracted 'BDB-Wrapper-0.15/MANIFEST'
[MSG] [Tue Jul 8 11:09:03 2008] Extracted 'BDB-Wrapper-0.15/META.yml'
[MSG] [Tue Jul 8 11:09:03 2008] Extracted 'BDB-Wrapper-0.15/README'
[MSG] [Tue Jul 8 11:09:03 2008] Extracted 'BDB-Wrapper-0.15/t/'
[MSG] [Tue Jul 8 11:09:03 2008] Extracted 'BDB-Wrapper-0.15/t/BDB-Wrapper.t'
[MSG] [Tue Jul 8 11:09:03 2008] Extracted 'BDB::Wrapper' to '/home/cpan/perl588/.cpanplus/5.8.8/build/BDB-Wrapper-0.15'
[MSG] [Tue Jul 8 11:09:09 2008] Checking if your kit is complete...
Looks good
WARNING: Setting ABSTRACT via file 'lib/BDB/Wrapper.pm' failed
at /home/cpan/perl588/lib/5.8.8/ExtUtils/MakeMaker.pm line 615
Writing Makefile for BDB::Wrapper
[MSG] [Tue Jul 8 11:09:09 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Tue Jul 8 11:09:13 2008] cp lib/BDB/Wrapper.pm blib/lib/BDB/Wrapper.pm
AutoSplitting blib/lib/BDB/Wrapper.pm (blib/lib/auto/BDB/Wrapper)
blib/lib/BDB/Wrapper.pm: some names are not unique when truncated to 8 characters:
directory blib/lib/auto/BDB/Wrapper:
create_read_dbh.al, create_read_hash_ref.al truncate to create_r
create_write_dbh.al, create_write_hash_ref.al truncate to create_w
Manifying blib/man3/BDB::Wrapper.3
[ERROR] [Tue Jul 8 11:09:17 2008] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /home/cpan/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/BDB-Wrapper......Can't locate BerkeleyDB.pm in @INC (@INC contains: /home/cpan/perl588/.cpanplus/5.8.8/build/BDB-Wrapper-0.15/blib/lib /home/cpan/perl588/.cpanplus/5.8.8/build/BDB-Wrapper-0.15/blib/arch /home/cpan/perl588/.cpanplus/5.8.8/build/BDB-Wrapper-0.15/blib /home/cpan/perl588/lib/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl588/lib/5.8.8 /home/cpan/perl588/lib/site_perl/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl588/lib/site_perl/5.8.8 /home/cpan/perl588/lib/site_perl .) at /home/cpan/perl588/.cpanplus/5.8.8/build/BDB-Wrapper-0.15/blib/lib/BDB/Wrapper.pm line 5.
BEGIN failed--compilation aborted at /home/cpan/perl588/.cpanplus/5.8.8/build/BDB-Wrapper-0.15/blib/lib/BDB/Wrapper.pm line 5.
Compilation failed in require at t/BDB-Wrapper.t line 10.
BEGIN failed--compilation aborted at t/BDB-Wrapper.t line 10.
Dubious, test returned 2 (wstat 512, 0x200)
Failed 22/22 subtests
Test Summary Report
-------------------
t/BDB-Wrapper.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: Bad plan. You planned 22 tests but ran 0.
Files=1, Tests=0, 0 wallclock secs ( 0.04 usr 0.00 sys + 0.04 cusr 0.01 csys = 0.09 CPU)
Result: FAIL
Failed 1/1 test programs. 0/0 subtests failed.
make: *** [test_dynamic] Error 2
[MSG] [Tue Jul 8 11:09:17 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'
MISSING PREREQUISITES:
It was observed that the test suite seem to fail without these modules:
BerkeleyDB
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'HIKARINE (cpanplus-info@lists.sf.net)',
... # other information
PREREQ_PM => {
'BerkeleyDB' => '0', # or a minimum working version
}
);
If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be
worth a look.
Thanks! :-)
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPAN::YACSmoke 0.0307. Powered by POE::Component::CPAN::YACSmoke.
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_GB.UTF-8
PATH = /usr/local/bin:/bin:/usr/bin:/usr/X11/bin
PERL5LIB = :/home/cpan/perl588/.cpanplus/5.8.8/build/BDB-Wrapper-0.15/blib/lib:/home/cpan/perl588/.cpanplus/5.8.8/build/BDB-Wrapper-0.15/blib/arch:/home/cpan/perl588/.cpanplus/5.8.8/build/BDB-Wrapper-0.15/blib
PERL5_CPANPLUS_IS_RUNNING = 32164
PERL5_CPANPLUS_IS_VERSION = 0.83_08
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen.linux
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/perl588/bin/perl
UID: $< = 1000
EUID: $> = 1000
GID: $( = 100 100
EGID: $) = 100 100
-------------------------------
--
Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
Platform:
osname=linux, osvers=2.6.16.38, archname=i686-linux-thread-multi-64int-ld
uname='linux scratch 2.6.16.38 #1 preempt thu feb 22 16:04:10 gmt 2007 i686 athlon-4 i386 gnulinux '
config_args='-e'
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=undef uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include'
ccversion='', gccversion='4.0.3', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='long double', nvsize=12, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=/lib/libc-2.3.6.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.3.6'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'
Thread Next