Front page | perl.cpan.testers |
Postings from July 2008
FAIL Script-Toolbox-0.22 MSWin32-x86-multi-thread 5.1
From:
sanko
Date:
July 6, 2008 12:11
Subject:
FAIL Script-Toolbox-0.22 MSWin32-x86-multi-thread 5.1
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
--
Dear Matthias Eckardt,
This is a computer-generated report for Script-Toolbox-0.22
on perl 5.11.0 patch 34101, created by CPAN-Reporter-1.16.
Thank you for uploading your work to CPAN. However, there was a problem
testing your distribution.
If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:
http://cpantest.grango.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from 'C:\MinGW\bin\dmake.EXE test':
C:\perl\bin\perl.exe "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib\lib', 'blib\arch')" t/*.t
t/01_new.......The system cannot find the path specified.
readline() on closed filehandle FH at t/01_new.t line 18.
Use of uninitialized value $this in pattern match (m//) at t/01_new.t line 47.
# Failed test 'Invalid Option def 1'
# at t/01_new.t line 47.
# undef
# doesn't match '(?-xism:.*Invalid .*invalid.)'
The system cannot find the path specified.
readline() on closed filehandle FH at t/01_new.t line 18.
Use of uninitialized value $this in pattern match (m//) at t/01_new.t line 51.
# Failed test 'Invalid Option def 1'
# at t/01_new.t line 51.
# undef
# doesn't match '(?-xism:.*Invalid .*invalid.)'
The system cannot find the path specified.
readline() on closed filehandle FH at t/01_new.t line 18.
Use of uninitialized value $this in pattern match (m//) at t/01_new.t line 56.
# Failed test 'Invalid Option def 1'
# at t/01_new.t line 56.
# undef
# doesn't match '(?-xism:.*Invalid .*invalid.)'
The system cannot find the path specified.
readline() on closed filehandle FH at t/01_new.t line 18.
Use of uninitialized value $this in pattern match (m//) at t/01_new.t line 65.
# Failed test 'Valid option read.'
# at t/01_new.t line 65.
# undef
# doesn't match '(?-xism:meier)'
The system cannot find the path specified.
readline() on closed filehandle FH at t/01_new.t line 18.
Use of uninitialized value $this in pattern match (m//) at t/01_new.t line 74.
# Failed test 'Print usage 1.'
# at t/01_new.t line 74.
# undef
# doesn't match '(?-xism:Missing mandatory option 'file'.)'
The system cannot find the path specified.
readline() on closed filehandle FH at t/01_new.t line 18.
Use of uninitialized value $this in pattern match (m//) at t/01_new.t line 81.
# Failed test 'Use default value.'
# at t/01_new.t line 81.
# undef
# doesn't match '(?-xism:meier)'
# Looks like you failed 6 tests of 11.
Dubious, test returned 6 (wstat 1536, 0x600)
Failed 6/11 subtests
t/02_Log.......'rm' is not recognized as an internal or external command,
operable program or batch file.
The system cannot find the path specified.
# Failed test 'Log'
# at t/02_Log.t line 85.
# got: '1'
# expected: '0'
Use of uninitialized value $this in pattern match (m//) at t/02_Log.t line 88.
# Failed test 'Log'
# at t/02_Log.t line 88.
# undef
# doesn't match '(?-xism:^_TST_: [A-z]{3} [A-z]{3} +\d{1,2} \d{2}:\d{2}:\d{2} \d{4}: logtest)'
'rm' is not recognized as an internal or external command,
operable program or batch file.
The system cannot find the path specified.
# Failed test 'Log'
# at t/02_Log.t line 99.
# got: '1'
# expected: '0'
Use of uninitialized value $this in pattern match (m//) at t/02_Log.t line 102.
# Failed test 'Log'
# at t/02_Log.t line 102.
# undef
# doesn't match '(?-xism:^_TST_: [A-z]{3} [A-z]{3} +\d{1,2} \d{2}:\d{2}:\d{2} \d{4}: logtest)'
'rm' is not recognized as an internal or external command,
operable program or batch file.
The system cannot find the path specified.
# Failed test 'Log'
# at t/02_Log.t line 111.
# got: '1'
# expected: '0'
# Failed test 'Log'
# at t/02_Log.t line 115.
readline() on closed filehandle FH at t/02_Log.t line 116.
Use of uninitialized value $this in pattern match (m//) at t/02_Log.t line 117.
# Failed test 'Log'
# at t/02_Log.t line 117.
# undef
# doesn't match '(?-xism:^_TST_: [A-z]{3} [A-z]{3} +\d{1,2} \d{2}:\d{2}:\d{2} \d{4}: logtest)'
'rm' is not recognized as an internal or external command,
operable program or batch file.
The system cannot find the path specified.
# Failed test 'Log'
# at t/02_Log.t line 131.
# got: '1'
# expected: '0'
Use of uninitialized value $this in pattern match (m//) at t/02_Log.t line 134.
# Failed test 'Log'
# at t/02_Log.t line 134.
# undef
# doesn't match '(?-xism:^_TST_: [A-z]{3} [A-z]{3} +\d{1,2} \d{2}:\d{2}:\d{2} \d{4}: logtest)'
# Looks like you failed 9 tests of 18.
Dubious, test returned 9 (wstat 2304, 0x900)
Failed 9/18 subtests
t/03_Exit......The system cannot find the path specified.
readline() on closed filehandle FH at t/03_Exit.t line 18.
'cp' is not recognized as an internal or external command,
operable program or batch file.
# Failed test 'Exit'
# at t/03_Exit.t line 35.
# got: '1'
# expected: '2'
Use of uninitialized value $this in pattern match (m//) at t/03_Exit.t line 36.
# Failed test 'Exit'
# at t/03_Exit.t line 36.
# undef
# doesn't match '(?-xism:\d{4}:\s+test)'
The system cannot find the path specified.
The system cannot find the path specified.
The system cannot find the path specified.
readline() on closed filehandle FH at t/03_Exit.t line 18.
'cp' is not recognized as an internal or external command,
operable program or batch file.
# Failed test 'help'
# at t/03_Exit.t line 58.
# got: '1'
# expected: '2'
Use of uninitialized value $this in pattern match (m//) at t/03_Exit.t line 59.
# Failed test 'Help'
# at t/03_Exit.t line 59.
# undef
# doesn't match '(?-xism:Missing nroff)'
The system cannot find the path specified.
readline() on closed filehandle FH at t/03_Exit.t line 18.
'cp' is not recognized as an internal or external command,
operable program or batch file.
# Failed test 'help'
# at t/03_Exit.t line 63.
# got: '1'
# expected: '2'
Use of uninitialized value $this in pattern match (m//) at t/03_Exit.t line 64.
# Failed test 'Help'
# at t/03_Exit.t line 64.
# undef
# doesn't match '(?-xism:Missing nroff)'
# Looks like you failed 6 tests of 10.
Dubious, test returned 6 (wstat 1536, 0x600)
Failed 6/10 subtests
(less 4 skipped subtests: 0 okay)
t/04_Open......ok
t/05_GetSet....ok
t/06_Table.....The syntax of the command is incorrect.
Can't Open(>> /tmp/06_Table.log), $! is "No such file or directory" at t/06_Table.t line 42
# Looks like you planned 11 tests but only ran 1.
# Looks like your test died just after 1.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 10/11 subtests
t/07_File......The syntax of the command is incorrect.
Can't Open(>> /tmp/07_File.log), $! is "No such file or directory" at t/07_File.t line 15
# Looks like you planned 25 tests but only ran 1.
# Looks like your test died just after 1.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 24/25 subtests
t/08_Dir.......The syntax of the command is incorrect.
Can't Open(>> /tmp/08_Dir.log), $! is "No such file or directory" at t/08_Dir.t line 15
# Looks like you planned 11 tests but only ran 1.
# Looks like your test died just after 1.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 10/11 subtests
t/09_Misc......ok
t/10_Stat......Use of uninitialized value in numeric gt (>) at t/10_Stat.t line 28.
# Failed test at t/10_Stat.t line 28.
Use of uninitialized value in numeric gt (>) at t/10_Stat.t line 29.
# Failed test at t/10_Stat.t line 29.
Use of uninitialized value in numeric gt (>) at t/10_Stat.t line 30.
# Failed test at t/10_Stat.t line 30.
Use of uninitialized value in numeric gt (>) at t/10_Stat.t line 31.
# Failed test at t/10_Stat.t line 31.
Use of uninitialized value in numeric gt (>) at t/10_Stat.t line 32.
# Failed test at t/10_Stat.t line 32.
Use of uninitialized value in numeric ge (>=) at t/10_Stat.t line 33.
Use of uninitialized value in numeric gt (>) at t/10_Stat.t line 34.
# Failed test at t/10_Stat.t line 34.
Use of uninitialized value in numeric gt (>) at t/10_Stat.t line 35.
# Failed test at t/10_Stat.t line 35.
Use of uninitialized value in numeric gt (>) at t/10_Stat.t line 36.
# Failed test at t/10_Stat.t line 36.
Use of uninitialized value in numeric gt (>) at t/10_Stat.t line 37.
# Failed test at t/10_Stat.t line 37.
Use of uninitialized value in numeric ge (>=) at t/10_Stat.t line 38.
Use of uninitialized value in numeric gt (>) at t/10_Stat.t line 39.
# Failed test at t/10_Stat.t line 39.
Use of uninitialized value in numeric ge (>=) at t/10_Stat.t line 40.
Can't Open(> /tmp/__KEY__), $! is "No such file or directory" at t/10_Stat.t line 44
# Looks like you planned 19 tests but only ran 15.
# Looks like you failed 10 tests of 15 run.
# Looks like your test died just after 15.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 14/19 subtests
Test Summary Report
-------------------
t/01_new (Wstat: 1536 Tests: 11 Failed: 6)
Failed tests: 6-11
Non-zero exit status: 6
t/02_Log (Wstat: 2304 Tests: 18 Failed: 9)
Failed tests: 1, 4-5, 8-9, 13-15, 18
Non-zero exit status: 9
t/03_Exit (Wstat: 1536 Tests: 10 Failed: 6)
Failed tests: 1-2, 7-10
Non-zero exit status: 6
t/06_Table (Wstat: 65280 Tests: 1 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 11 tests but ran 1.
t/07_File (Wstat: 65280 Tests: 1 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 25 tests but ran 1.
t/08_Dir (Wstat: 65280 Tests: 1 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 11 tests but ran 1.
t/10_Stat (Wstat: 65280 Tests: 15 Failed: 10)
Failed tests: 3-7, 9-12, 14
Non-zero exit status: 255
Parse errors: Bad plan. You planned 19 tests but ran 15.
Files=10, Tests=86, 5 wallclock secs ( 0.16 usr + 0.03 sys = 0.19 CPU)
Result: FAIL
Failed 7/10 test programs. 31/86 subtests failed.
dmake.EXE: Error code 255, while making 'test_dynamic'
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
------------ ---- --------
Data::Dumper 2 2.121_16
Fatal 1 1.06
File::stat 1 1.00
IO::Dir 1 1.06_01
IO::File 1 1.14
UNIVERSAL 1 1.04
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
COMSPEC = C:\WINDOWS\system32\cmd.exe
NUMBER_OF_PROCESSORS = 1
PATH = C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Graphviz2.18\Bin;C:\Program Files\Bakefile;C:\Program Files\TortoiseSVN\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Subversion\bin;C:\MinGW\bin\;C:\perl\bin\;C:\bin\
PERL5LIB =
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 3400
PERL5_CPAN_IS_RUNNING = 3400
PERL5_CPAN_IS_RUNNING_IN_RECURSION = 436,3400
PERL_CR_SMOKER_CURRENT = Script-Toolbox-0.22
PERL_MM_USE_DEFAULT = 1
PROCESSOR_IDENTIFIER = x86 Family 15 Model 3 Stepping 3, GenuineIntel
TEMP = C:\DOCUME~1\SANKOR~1\LOCALS~1\Temp
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = C:\perl\bin\perl.exe
$UID/$EUID = 0 / 0
$GID = 0
$EGID = 0
Win32::GetOSName = WinXP/.Net
Win32::GetOSVersion = Service Pack 3, v.3311, 5, 1, 2600, 2, 3, 0, 0, 1
Win32::FsType = NTFS
Win32::IsAdminUser = 1
Perl module toolchain versions installed:
Module Have
------------------- ---------
CPAN 1.92_63
Cwd 3.2701
ExtUtils::CBuilder 0.23
ExtUtils::Command 1.14
ExtUtils::Install 1.50_01
ExtUtils::MakeMaker 6.44
ExtUtils::Manifest 1.54
ExtUtils::ParseXS 2.19_01
File::Spec 3.2701
Module::Build 0.2808_02
Module::Signature n/a
Test::Harness 3.12
Test::More 0.80
YAML 0.66
YAML::Syck n/a
version 0.7501
--
Summary of my perl5 (revision 5 version 11 subversion 0 patch 34101) configuration:
Platform:
osname=MSWin32, osvers=5.1, archname=MSWin32-x86-multi-thread
uname=''
config_args='undef'
hint=recommended, useposix=true, d_sigaction=undef
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=undef, use64bitall=undef, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags =' -s -O2 -DWIN32 -DHAVE_DES_FCRYPT -DPERL_IMPLICIT_CONTEXT -DPERL_IMPLICIT_SYS -fno-strict-aliasing -mms-bitfields -DPERL_MSVCRT_READFIX',
optimize='-s -O2',
cppflags='-DWIN32'
ccversion='', gccversion='3.4.5', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
d_longlong=undef, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='long long', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='g++', ldflags ='-s -L"c:\perl\lib\CORE" -L"C:\MinGW\lib"'
libpth=C:\MinGW\lib
libs=-lmsvcrt -lmoldname -lkernel32 -luser32 -lgdi32 -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 -loleaut32 -lnetapi32 -luuid -lws2_32 -lmpr -lwinmm -lversion -lodbc32 -lodbccp32
perllibs=-lmsvcrt -lmoldname -lkernel32 -luser32 -lgdi32 -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 -loleaut32 -lnetapi32 -luuid -lws2_32 -lmpr -lwinmm -lversion -lodbc32 -lodbccp32
libc=-lmsvcrt, so=dll, useshrplib=true, libperl=libperl511.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_win32.xs, dlext=dll, d_dlsymun=undef, ccdlflags=' '
cccdlflags=' ', lddlflags='-mdll -s -L"c:\perl\lib\CORE" -L"C:\MinGW\lib"'
-
FAIL Script-Toolbox-0.22 MSWin32-x86-multi-thread 5.1
by sanko