Front page | perl.cpan.testers |
Postings from July 2008
NA CPAN-Reporter-1.16 i386-freebsd 6.1-release-p23
From:
srezic
Date:
July 4, 2008 08:23
Subject:
NA CPAN-Reporter-1.16 i386-freebsd 6.1-release-p23
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
--
Dear David Golden,
This is a computer-generated report for CPAN-Reporter-1.16
on perl 5.8.8 patch 33662, created by CPAN-Reporter-1.15.
Thank you for uploading your work to CPAN. While attempting to build or test
this distribution, the distribution signaled that support is not available
either for this operating system or this version of Perl. Nevertheless, any
diagnostic output produced is provided below for reference. If this is not
what you expect, you may wish to consult the CPAN Testers Wiki:
http://cpantest.grango.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
none provided
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
PERL_DL_NONLAZY=1 /usr/perl5.8.8@33662/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/01_CPAN_Reporter...................ok
t/02_config_env_vars.................ok
t/03_config_file.....................ok
t/04_option_parsing..................ok
t/05_prompting.......................ok
t/06_prompt_text.....................ok
t/10_prereq_pm.......................ok
t/11_env_config......................ok
t/12_toolchain_versions..............ok
t/13_record_command..................# sleeping for timeout test
# sleeping for timeout test
# sleeping for timeout test
ok
t/14_command_timeout.................# sleeping for timeout test
# sleeping for timeout test
# sleeping for timeout test
# sleeping for timeout test
# sleeping for timeout test
# sleeping for timeout test
# sleeping for timeout test
# sleeping for timeout test
ok
t/15_option_validation...............ok
t/20_report_output...................ok
t/30_PL_report.......................
# Failed test 't-PrereqPerl-NOK-our: grade_PL() for Build.PL returned 1'
# at t/30_PL_report.t line 110.
# Failed test 't-PrereqPerl-NOK-our: 'Build.PL' grade reported as 'pass''
# at t/30_PL_report.t line 110.
# got: 'na'
# expected: 'pass'
# STDOUT:
# Checking prerequisites...
# Use of uninitialized value in pattern match (m//) at /usr/perl5.8.8@33662/lib/site_perl/5.8.8/utf8_heavy.pl line 185.
# Use of uninitialized value in scalar assignment at /usr/perl5.8.8@33662/lib/site_perl/5.8.8/utf8_heavy.pl line 201.
# Use of uninitialized value in pattern match (m//) at /usr/perl5.8.8@33662/lib/site_perl/5.8.8/utf8_heavy.pl line 202.
# - ERROR: perl (5..8.8) is installed, but we need version >= 5.006
#
# ERRORS/WARNINGS FOUND IN PREREQUISITES. You may wish to install the versions
# of the modules indicated above before proceeding with this installation
#
# Creating new 'Build' script for 'Bogus-Module' version '0.01'
# (/usr/perl5.8.8@33662/bin/perl Build.PL exited with 0)
# CPAN::Reporter: Build.PL result is 'na', Perl version too low.
# CPAN::Reporter: preparing a CPAN Testers report for Bogus-Module-1.23
# CPAN::Reporter: sending test report with 'na' to no_one@example.com
#
#
# STDERR:
#
# Failed test 't-PrereqPerl-NOK-our: report notification correct'
# at t/30_PL_report.t line 110.
# 'Checking prerequisites...
# Use of uninitialized value in pattern match (m//) at /usr/perl5.8.8@33662/lib/site_perl/5.8.8/utf8_heavy.pl line 185.
# Use of uninitialized value in scalar assignment at /usr/perl5.8.8@33662/lib/site_perl/5.8.8/utf8_heavy.pl line 201.
# Use of uninitialized value in pattern match (m//) at /usr/perl5.8.8@33662/lib/site_perl/5.8.8/utf8_heavy.pl line 202.
# - ERROR: perl (5..8.8) is installed, but we need version >= 5.006
#
# ERRORS/WARNINGS FOUND IN PREREQUISITES. You may wish to install the versions
# of the modules indicated above before proceeding with this installation
#
# Creating new 'Build' script for 'Bogus-Module' version '0.01'
# (/usr/perl5.8.8@33662/bin/perl Build.PL exited with 0)
# CPAN::Reporter: Build.PL result is 'na', Perl version too low.
# CPAN::Reporter: preparing a CPAN Testers report for Bogus-Module-1.23
# CPAN::Reporter: sending test report with 'na' to no_one@example.com
# '
# matches '/preparing a CPAN Testers report for Bogus\-Module\-1\.23/'
# Failed test 't-PrereqPerl-NOK-our: results not sent'
# at t/30_PL_report.t line 110.
# STDOUT:
# Checking prerequisites...
# Use of uninitialized value in pattern match (m//) at /usr/perl5.8.8@33662/lib/site_perl/5.8.8/utf8_heavy.pl line 185.
# Use of uninitialized value in scalar assignment at /usr/perl5.8.8@33662/lib/site_perl/5.8.8/utf8_heavy.pl line 201.
# Use of uninitialized value in pattern match (m//) at /usr/perl5.8.8@33662/lib/site_perl/5.8.8/utf8_heavy.pl line 202.
# - ERROR: perl (5..8.8) is installed, but we need version >= 5.006
#
# ERRORS/WARNINGS FOUND IN PREREQUISITES. You may wish to install the versions
# of the modules indicated above before proceeding with this installation
#
# Creating new 'Build' script for 'Bogus-Module' version '0.01'
# (/usr/perl5.8.8@33662/bin/perl Build.PL exited with 0)
# CPAN::Reporter: Build.PL result is 'na', Perl version too low.
# CPAN::Reporter: preparing a CPAN Testers report for Bogus-Module-1.23
# CPAN::Reporter: sending test report with 'na' to no_one@example.com
#
#
# STDERR:
#
# Looks like you failed 4 tests of 74.
Dubious, test returned 4 (wstat 1024, 0x400)
Failed 4/74 subtests
t/31_PL_report_discard...............ok
t/40_make_report.....................ok
t/41_make_report_discard.............ok
t/50_test_report_pass................ok
t/51_test_report_fail................ok
t/52_test_report_unknown.............ok
t/53_test_report_na..................ok
t/54_test_report_split...............ok
t/55_test_report_discard.............ok
t/56_test_report_harness_versions....ok
t/57_hang_interrupt..................ok
t/60_bad_author......................ok
t/61_bad_dist_names..................ok
t/62_duplicate_reports...............ok
t/63_config_send_report..............ok
t/64_transport.......................ok
t/65_skipfile........................ok
t/66_have_tested.....................ok
t/67_dont_cc_blead...................ok
t/68_is_make.........................ok
t/70_darwin_move_config..............ok
t/71_missing_config..................ok
t/72_rename_history..................ok
Test Summary Report
-------------------
t/30_PL_report (Wstat: 1024 Tests: 74 Failed: 4)
Failed tests: 71-74
Non-zero exit status: 4
Files=37, Tests=1879, 449 wallclock secs ( 0.46 usr 0.11 sys + 155.52 cusr 41.43 csys = 197.52 CPU)
Result: FAIL
Failed 1/37 test programs. 4/1879 subtests failed.
*** Error code 255
Stop in /var/tmp/CPAN-build/CPAN-Reporter-1.16-rtj8Bn.
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
--------------------- ------ ------
Config::Tiny 2.08 2.12
CPAN 1.9203 1.9205
Devel::Autoflush 0 0.02
ExtUtils::MakeMaker 6.36 6.44
File::Basename 0 2.76
File::Copy::Recursive 0.35 0.36
File::Find 0 1.12
File::HomeDir 0.58 0.80
File::Path 0 2.06
File::pushd 0.32 1.00
File::Spec 3.19 3.2701
File::Temp 0.16 0.20
IO::CaptureOutput 1.03 1.09
Parse::CPAN::Meta 0 0.03
Probe::Perl 0 0.01
Tee 0.13 0.13
Test::More 0.62 0.80
Test::Reporter 1.4 1.4002
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
PATH = /usr/local/bin:/usr/X11R6/bin:/usr/X11/bin:/usr/perl5.8.0/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin:/usr/local/pilot/bin:/home/cpansand/bin/freebsd6.1:/home/cpansand/bin/sh:/home/cpansand/bin:/usr/X386/bin:/usr/games:/home/cpansand/devel:/usr/home/e/eserte/work/srezic-misc/scripts
PERL5LIB =
PERL5_CPANPLUS_IS_RUNNING = 3091
PERL5_CPAN_IS_RUNNING = 3091
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_HTML_DISPLAY_CLASS = HTML::Display::Mozilla
SHELL = /usr/local/bin/zsh
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /usr/perl5.8.8@33662/bin/perl
$UID/$EUID = 1023 / 1023
$GID = 1023 1023 1023
$EGID = 1023 1023 1023
Perl module toolchain versions installed:
Module Have
------------------- ------
CPAN 1.9205
Cwd 3.2701
ExtUtils::CBuilder 0.23
ExtUtils::Command 1.14
ExtUtils::Install 1.50
ExtUtils::MakeMaker 6.44
ExtUtils::Manifest 1.54
ExtUtils::ParseXS 2.19
File::Spec 3.2701
Module::Build 0.2808
Module::Signature 0.55
Test::Harness 3.12
Test::More 0.80
YAML 0.66
YAML::Syck 1.05
version 0.7501
--
Summary of my perl5 (revision 5 version 8 subversion 8 patch 33662) configuration:
Platform:
osname=freebsd, osvers=6.1-release-p23, archname=i386-freebsd
uname='freebsd biokovo.herceg.de 6.1-release-p23 freebsd 6.1-release-p23 #0: wed feb 13 10:36:51 utc 2008 root@i386-builder.daemonology.net:usrobjusrsrcsysgeneric i386 '
config_args='-ds -e -Dprefix=/usr/perl5.8.8@33662'
hint=recommended, useposix=true, d_sigaction=define
usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=undef use64bitall=undef uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -I/usr/local/include',
optimize='-O',
cppflags='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='3.4.4 [FreeBSD] 20050518', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags ='-Wl,-E -L/usr/local/lib'
libpth=/usr/lib /usr/local/lib
libs=-lm -lcrypt -lutil -lc
perllibs=-lm -lcrypt -lutil -lc
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-DPIC -fPIC', lddlflags='-shared -L/usr/local/lib'
-
NA CPAN-Reporter-1.16 i386-freebsd 6.1-release-p23
by srezic