Front page | perl.cpan.testers |
Postings from July 2008
FAIL Qt-0.03 i686-linux 2.6.24-16-generic
From:
DAGOLDEN
Date:
July 3, 2008 12:45
Subject:
FAIL Qt-0.03 i686-linux 2.6.24-16-generic
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
--
Dear Ashley Winters,
This is a computer-generated report for Qt-0.03
on perl 5.10.0, created by CPAN-Reporter-1.1556.
Thank you for uploading your work to CPAN. However, there was a problem
testing your distribution.
If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:
http://cpantest.grango.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make':
cp Qt.pm blib/lib/Qt.pm
make[1]: Entering directory `/home/david/.cpan/build/Qt-0.03-UfJZpj/QAccel'
cp QAccel.pm ../blib/lib/QAccel.pm
/home/david/perl/5.10.0/bin/perl /home/david/perl/5.10.0/lib/5.10.0/ExtUtils/xsubpp -typemap /home/david/perl/5.10.0/lib/5.10.0/ExtUtils/typemap QAccel.xs > QAccel.xsc && mv QAccel.xsc QAccel.c
g++ -c -I/include -I../libperlqt/include -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -DVERSION=\"0.03\" -DXS_VERSION=\"0.03\" -fPIC "-I/home/david/perl/5.10.0/lib/5.10.0/i686-linux/CORE" QAccel.c
In file included from QAccel.xs:10:
../libperlqt/include/paccel.h:14:20: error: qaccel.h: No such file or directory
In file included from ../libperlqt/include/paccel.h:15,
from QAccel.xs:10:
../libperlqt/include/pqt.h:21:21: error: qglobal.h: No such file or directory
../libperlqt/include/pqt.h:22:22: error: qwindefs.h: No such file or directory
In file included from QAccel.xs:11:
../libperlqt/include/sigslot.h:14:22: error: qmetaobj.h: No such file or directory
../libperlqt/include/sigslot.h:15:21: error: qobject.h: No such file or directory
In file included from ../libperlqt/include/pobject.h:18,
from ../libperlqt/include/sigslot.h:16,
from QAccel.xs:11:
../libperlqt/include/virtual.h:14:20: error: qevent.h: No such file or directory
In file included from QAccel.xs:10:
../libperlqt/include/paccel.h:17: error: expected class-name before ‘{’ token
../libperlqt/include/paccel.h:19: error: expected `)' before ‘*’ token
In file included from ../libperlqt/include/pobject.h:18,
from ../libperlqt/include/sigslot.h:16,
from QAccel.xs:11:
../libperlqt/include/virtual.h:30: error: ‘QTimerEvent’ has not been declared
../libperlqt/include/virtual.h:32: error: ‘QMouseEvent’ has not been declared
../libperlqt/include/virtual.h:33: error: ‘QMouseEvent’ has not been declared
../libperlqt/include/virtual.h:34: error: ‘QMouseEvent’ has not been declared
../libperlqt/include/virtual.h:35: error: ‘QPaintEvent’ has not been declared
../libperlqt/include/virtual.h:36: error: ‘QResizeEvent’ has not been declared
In file included from ../libperlqt/include/sigslot.h:16,
from QAccel.xs:11:
../libperlqt/include/pobject.h:21: error: expected class-name before ‘,’ token
../libperlqt/include/pobject.h:23: error: expected `)' before ‘*’ token
../libperlqt/include/pobject.h:27: error: ‘QTimerEvent’ has not been declared
../libperlqt/include/pobject.h:30: error: expected class-name before ‘{’ token
../libperlqt/include/pobject.h:32: error: ISO C++ forbids declaration of ‘QConnectionList’ with no type
../libperlqt/include/pobject.h:32: error: expected ‘;’ before ‘*’ token
../libperlqt/include/pobject.h:35: error: expected `;' before ‘void’
../libperlqt/include/pobject.h:36: error: ‘QTimerEvent’ has not been declared
../libperlqt/include/pobject.h: In member function ‘void pObject::protected_initMetaObject()’:
../libperlqt/include/pobject.h:35: error: ‘initMetaObject’ was not declared in this scope
../libperlqt/include/pobject.h: At global scope:
../libperlqt/include/pobject.h:40: error: expected initializer before ‘*’ token
In file included from QAccel.xs:11:
../libperlqt/include/sigslot.h:19: error: expected class-name before ‘{’ token
../libperlqt/include/sigslot.h:34: error: ISO C++ forbids declaration of ‘QMetaObject’ with no type
../libperlqt/include/sigslot.h:34: error: expected ‘;’ before ‘*’ token
../libperlqt/include/sigslot.h: In constructor ‘pQtSigSlot::pQtSigSlot(SV*, char*)’:
../libperlqt/include/sigslot.h:29: warning: deprecated conversion from string constant to ‘char*’
../libperlqt/include/sigslot.h: At global scope:
../libperlqt/include/sigslot.h:43: error: ‘QMember’ does not name a type
QAccel.c: In function ‘void XS_QAccel_new(CV*)’:
QAccel.c:40: error: ‘QWidget’ was not declared in this scope
QAccel.c:40: error: ‘parent’ was not declared in this scope
QAccel.c:40: error: expected primary-expression before ‘)’ token
QAccel.c:40: error: expected `;' before ‘extract_ptr’
QAccel.c:51: error: new initializer expression list treated as compound expression
QAccel.c:52: warning: deprecated conversion from string constant to ‘char*’
QAccel.c: In function ‘void XS_QAccel_clear(CV*)’:
QAccel.c:72: error: ‘QAccel’ was not declared in this scope
QAccel.c:72: error: ‘THIS’ was not declared in this scope
QAccel.c:72: error: expected primary-expression before ‘)’ token
QAccel.c:72: error: expected `;' before ‘extract_ptr’
QAccel.c: In function ‘void XS_QAccel_connectItem(CV*)’:
QAccel.c:93: error: ‘QObject’ was not declared in this scope
QAccel.c:93: error: ‘receiver’ was not declared in this scope
QAccel.c:93: error: expected primary-expression before ‘)’ token
QAccel.c:93: error: expected `;' before ‘extract_ptr’
QAccel.c:94: error: ‘QAccel’ was not declared in this scope
QAccel.c:94: error: ‘THIS’ was not declared in this scope
QAccel.c:94: error: expected primary-expression before ‘)’ token
QAccel.c:94: error: expected `;' before ‘extract_ptr’
QAccel.xs:31: error: ‘na’ was not declared in this scope
QAccel.xs:33: error: ‘SIGNAL_CODE’ was not declared in this scope
QAccel.xs:33: error: ‘SLOT_CODE’ was not declared in this scope
QAccel.c: In function ‘void XS_QAccel_count(CV*)’:
QAccel.c:128: error: ‘QAccel’ was not declared in this scope
QAccel.c:128: error: ‘THIS’ was not declared in this scope
QAccel.c:128: error: expected primary-expression before ‘)’ token
QAccel.c:128: error: expected `;' before ‘extract_ptr’
QAccel.c: In function ‘void XS_QAccel_disconnectItem(CV*)’:
QAccel.c:152: error: ‘QObject’ was not declared in this scope
QAccel.c:152: error: ‘reciever’ was not declared in this scope
QAccel.c:152: error: expected primary-expression before ‘)’ token
QAccel.c:152: error: expected `;' before ‘extract_ptr’
QAccel.c:153: error: ‘QAccel’ was not declared in this scope
QAccel.c:153: error: ‘THIS’ was not declared in this scope
QAccel.c:153: error: expected primary-expression before ‘)’ token
QAccel.c:153: error: expected `;' before ‘extract_ptr’
QAccel.xs:53: error: ‘na’ was not declared in this scope
QAccel.xs:55: error: ‘SIGNAL_CODE’ was not declared in this scope
QAccel.xs:55: error: ‘SLOT_CODE’ was not declared in this scope
QAccel.c: In function ‘void XS_QAccel_findKey(CV*)’:
QAccel.c:183: error: ‘QAccel’ was not declared in this scope
QAccel.c:183: error: ‘THIS’ was not declared in this scope
QAccel.c:183: error: expected primary-expression before ‘)’ token
QAccel.c:183: error: expected `;' before ‘extract_ptr’
QAccel.c: In function ‘void XS_QAccel_insertItem(CV*)’:
QAccel.c:208: error: ‘QAccel’ was not declared in this scope
QAccel.c:208: error: ‘THIS’ was not declared in this scope
QAccel.c:208: error: expected primary-expression before ‘)’ token
QAccel.c:208: error: expected `;' before ‘extract_ptr’
QAccel.c: In function ‘void XS_QAccel_isEnabled(CV*)’:
QAccel.c:237: error: ‘QAccel’ was not declared in this scope
QAccel.c:237: error: ‘THIS’ was not declared in this scope
QAccel.c:237: error: expected primary-expression before ‘)’ token
QAccel.c:237: error: expected `;' before ‘extract_ptr’
QAccel.c: In function ‘void XS_QAccel_isItemEnabled(CV*)’:
QAccel.c:261: error: ‘QAccel’ was not declared in this scope
QAccel.c:261: error: ‘THIS’ was not declared in this scope
QAccel.c:261: error: expected primary-expression before ‘)’ token
QAccel.c:261: error: expected `;' before ‘extract_ptr’
QAccel.c: In function ‘void XS_QAccel_key(CV*)’:
QAccel.c:285: error: ‘QAccel’ was not declared in this scope
QAccel.c:285: error: ‘THIS’ was not declared in this scope
QAccel.c:285: error: expected primary-expression before ‘)’ token
QAccel.c:285: error: expected `;' before ‘extract_ptr’
QAccel.c: In function ‘void XS_QAccel_removeItem(CV*)’:
QAccel.c:309: error: ‘QAccel’ was not declared in this scope
QAccel.c:309: error: ‘THIS’ was not declared in this scope
QAccel.c:309: error: expected primary-expression before ‘)’ token
QAccel.c:309: error: expected `;' before ‘extract_ptr’
QAccel.c: In function ‘void XS_QAccel_setEnabled(CV*)’:
QAccel.c:330: error: ‘QAccel’ was not declared in this scope
QAccel.c:330: error: ‘THIS’ was not declared in this scope
QAccel.c:330: error: expected primary-expression before ‘)’ token
QAccel.c:330: error: expected `;' before ‘extract_ptr’
QAccel.c: In function ‘void XS_QAccel_setItemEnabled(CV*)’:
QAccel.c:352: error: ‘QAccel’ was not declared in this scope
QAccel.c:352: error: ‘THIS’ was not declared in this scope
QAccel.c:352: error: expected primary-expression before ‘)’ token
QAccel.c:352: error: expected `;' before ‘extract_ptr’
QAccel.c: In function ‘void boot_QAccel(CV*)’:
QAccel.c:370: warning: deprecated conversion from string constant to ‘char*’
make[1]: *** [QAccel.o] Error 1
make[1]: Leaving directory `/home/david/.cpan/build/Qt-0.03-UfJZpj/QAccel'
make: *** [subdirs] Error 2
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
No requirements found
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US.UTF-8
LD_LIBRARY_PATH = /home/david/opt/subversion/lib
PATH = .:/home/david/bin:/home/david/git/utility-scripts:/home/david/perl/current/bin:.:/home/david/bin:/home/david/git/utility-scripts:/home/david/perl/current/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
PERL5LIB =
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 14854
PERL5_CPAN_IS_EXECUTING = /home/david/.cpan/build/Qt-0.03-UfJZpj/Makefile.PL
PERL5_CPAN_IS_RUNNING = 14854
PERL5_CPAN_IS_RUNNING_IN_RECURSION = 5779,14854
PERL_CR_SMOKER_CURRENT = Qt-0.03
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /home/david/perl/5.10.0/bin/perl
$UID/$EUID = 1000 / 1000
$GID = 1000 4 20 24 25 29 30 44 46 107 115 116 1000
$EGID = 1000 4 20 24 25 29 30 44 46 107 115 116 1000
Perl module toolchain versions installed:
Module Have
------------------- ---------
CPAN 1.92_63
Cwd 3.2701
ExtUtils::CBuilder 0.23
ExtUtils::Command 1.13
ExtUtils::Install 1.45
ExtUtils::MakeMaker 6.44
ExtUtils::Manifest 1.51_01
ExtUtils::ParseXS 2.18_02
File::Spec 3.2701
Module::Build 0.2808_01
Module::Signature n/a
Test::Harness 3.12
Test::More 0.80
YAML 0.66
YAML::Syck n/a
version 0.74
--
Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
Platform:
osname=linux, osvers=2.6.24-16-generic, archname=i686-linux
uname='linux griffon 2.6.24-16-generic #1 smp thu apr 10 13:23:42 utc 2008 i686 gnulinux '
config_args='-de -Uversiononly -Dusedevel -Dprefix=/home/david/perl/5.10.0 -Dmydomain=.hyperbolic.net -Dcf_email=dagolden@cpan.org -Dperladmin=dagolden@cpan.org -Dcc=gcc'
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=undef, use64bitall=undef, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags ='-fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='4.2.3 (Ubuntu 4.2.3-2ubuntu7)', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='gcc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib
libs=-lnsl -ldb -ldl -lm -lcrypt -lutil -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc
libc=/lib/libc-2.7.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.7'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib'
-
FAIL Qt-0.03 i686-linux 2.6.24-16-generic
by DAGOLDEN