FAIL Script-Toolbox-0.12 MSWin32-x86-multi-thread 4.0

This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
	
--
This is an error report generated automatically by CPANPLUS,
version 0.0499.

Below is the error stack during 'make test':

	C:\perl\5.8.5\bin\perl.exe "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib\lib', 'blib\arch')" t\1_new.t t\2_Log.t t\3_Exit.t t\4_Open.t t\5_GetSet.t t\6_Table.t t\7_File.t t\8_Dir.t
t\1_new.......dubious
	Test returned status 7 (wstat 1792, 0x700)
DIED. FAILED tests 6-12
	Failed 7/12 tests, 41.67% okay
t\2_Log.......dubious
	Test returned status 9 (wstat 2304, 0x900)
DIED. FAILED tests 1, 4-5, 8-9, 13-15, 18
	Failed 9/18 tests, 50.00% okay
t\3_Exit......dubious
	Test returned status 2 (wstat 512, 0x200)
DIED. FAILED tests 1-2
	Failed 2/2 tests, 0.00% okay
t\4_Open......ok
t\5_GetSet....ok
t\6_Table.....dubious
	Test returned status 10 (wstat 2560, 0xa00)
DIED. FAILED tests 2-11
	Failed 10/11 tests, 9.09% okay
t\7_File......dubious
	Test returned status 22 (wstat 5632, 0x1600)
DIED. FAILED tests 2-23
	Failed 22/23 tests, 4.35% okay
t\8_Dir.......dubious
	Test returned status 10 (wstat 2560, 0xa00)
DIED. FAILED tests 2-11
	Failed 10/11 tests, 9.09% okay
Failed Test Stat Wstat Total Fail  Failed  List of Failed
-------------------------------------------------------------------------------
t\1_new.t      7  1792    12    7  58.33%  6-12
t\2_Log.t      9  2304    18    9  50.00%  1 4-5 8-9 13-15 18
t\3_Exit.t     2   512     2    2 100.00%  1-2
t\6_Table.t   10  2560    11   20 181.82%  2-11
t\7_File.t    22  5632    23   44 191.30%  2-23
t\8_Dir.t     10  2560    11   20 181.82%  2-11

Microsoft (R) Program Maintenance Utility Version 7.10.3077
Copyright (C) Microsoft Corporation.  All rights reserved.

Das System kann den angegebenen Pfad nicht finden.
readline() on closed filehandle FH at t\1_new.t line 18.

#     Failed test (t\1_new.t at line 47)
#                   undef
#     doesn't match '(?-xism:.*Invalid .*invalid.)'
Das System kann den angegebenen Pfad nicht finden.
readline() on closed filehandle FH at t\1_new.t line 18.

#     Failed test (t\1_new.t at line 51)
#                   undef
#     doesn't match '(?-xism:.*Invalid .*invalid.)'
Das System kann den angegebenen Pfad nicht finden.
readline() on closed filehandle FH at t\1_new.t line 18.

#     Failed test (t\1_new.t at line 55)
#                   undef
#     doesn't match '(?-xism:.*Invalid .*invalid.)'
Das System kann den angegebenen Pfad nicht finden.
readline() on closed filehandle FH at t\1_new.t line 18.

#     Failed test (t\1_new.t at line 60)
#                   undef
#     doesn't match '(?-xism:.*Invalid .*invalid.)'
Das System kann den angegebenen Pfad nicht finden.
readline() on closed filehandle FH at t\1_new.t line 18.

#     Failed test (t\1_new.t at line 69)
#                   undef
#     doesn't match '(?-xism:meier)'
Das System kann den angegebenen Pfad nicht finden.
readline() on closed filehandle FH at t\1_new.t line 18.

#     Failed test (t\1_new.t at line 78)
#                   undef
#     doesn't match '(?-xism:Missing mandatory option 'file'.)'
Das System kann den angegebenen Pfad nicht finden.
readline() on closed filehandle FH at t\1_new.t line 18.

#     Failed test (t\1_new.t at line 85)
#                   undef
#     doesn't match '(?-xism:meier)'
# Looks like you failed 7 tests of 12.
Der Befehl "rm" ist entweder falsch geschrieben oder
konnte nicht gefunden werden.
Das System kann den angegebenen Pfad nicht finden.

#     Failed test (t\2_Log.t at line 85)
#          got: '1'
#     expected: '0'

#     Failed test (t\2_Log.t at line 88)
#                   undef
#     doesn't match '(?-xism:^_TST_: [A-z]{3} [A-z]{3} +\d{1,2} \d{2}:\d{2}:\d{2} \d{4}: logtest)'
Der Befehl "rm" ist entweder falsch geschrieben oder
konnte nicht gefunden werden.
Das System kann den angegebenen Pfad nicht finden.

#     Failed test (t\2_Log.t at line 99)
#          got: '1'
#     expected: '0'

#     Failed test (t\2_Log.t at line 102)
#                   undef
#     doesn't match '(?-xism:^_TST_: [A-z]{3} [A-z]{3} +\d{1,2} \d{2}:\d{2}:\d{2} \d{4}: logtest)'
Der Befehl "rm" ist entweder falsch geschrieben oder
konnte nicht gefunden werden.
Das System kann den angegebenen Pfad nicht finden.

#     Failed test (t\2_Log.t at line 111)
#          got: '1'
#     expected: '0'

#     Failed test (t\2_Log.t at line 115)
readline() on closed filehandle FH at t\2_Log.t line 116.

#     Failed test (t\2_Log.t at line 117)
#                   undef
#     doesn't match '(?-xism:^_TST_: [A-z]{3} [A-z]{3} +\d{1,2} \d{2}:\d{2}:\d{2} \d{4}: logtest)'
Der Befehl "rm" ist entweder falsch geschrieben oder
konnte nicht gefunden werden.
Das System kann den angegebenen Pfad nicht finden.

#     Failed test (t\2_Log.t at line 131)
#          got: '1'
#     expected: '0'

#     Failed test (t\2_Log.t at line 134)
#                   undef
#     doesn't match '(?-xism:^_TST_: [A-z]{3} [A-z]{3} +\d{1,2} \d{2}:\d{2}:\d{2} \d{4}: logtest)'
# Looks like you failed 9 tests of 18.
Das System kann den angegebenen Pfad nicht finden.
readline() on closed filehandle FH at t\3_Exit.t line 18.

#     Failed test (t\3_Exit.t at line 34)
#          got: '1'
#     expected: '2'

#     Failed test (t\3_Exit.t at line 35)
#                   undef
#     doesn't match '(?-xism:\d{4}:\s+test)'
# Looks like you failed 2 tests of 2.
Syntaxfehler.
t\6_Table.t: Fri Jan 21 21:18:25 2005: Can't Open(>> /tmp/t\6_Table.log), $! is "No such file or directory" at t\6_Table.t line 27
# Looks like you planned 11 tests but only ran 1.
Syntaxfehler.
t\7_File.t: Fri Jan 21 21:18:25 2005: Can't Open(>> /tmp/t\7_File.log), $! is "No such file or directory" at t\7_File.t line 15
# Looks like you planned 23 tests but only ran 1.
Syntaxfehler.
t\8_Dir.t: Fri Jan 21 21:18:25 2005: Can't Open(>> /tmp/t\8_Dir.log), $! is "No such file or directory" at t\8_Dir.t line 15
# Looks like you planned 11 tests but only ran 1.
Failed 6/8 test scripts, 25.00% okay. 60/89 subtests failed, 32.58% okay.
NMAKE : fatal error U1077: 'C:\perl\5.8.5\bin\perl.exe' : return code '0x2'
Stop.


Additional comments:

Please use ExtUtils::Command instead of hardcoding the unix toolkit names. perl -MExtUtils::Command -e rm_f does `rm -f @ARGV` etc.

Thanks,
-max
--

Summary of my perl5 (revision 5 version 8 subversion 5) configuration:
  Platform:
    osname=MSWin32, osvers=4.0, archname=MSWin32-x86-multi-thread
    uname=''
    config_args='undef'
    hint=recommended, useposix=true, d_sigaction=undef
    usethreads=undef use5005threads=undef useithreads=define usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=undef use64bitall=undef uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cl', ccflags ='-nologo -GF -W3 -MD -Zi -DNDEBUG -O1 -DWIN32 -D_CONSOLE -DNO_STRICT -DHAVE_DES_FCRYPT  -DPERL_IMPLICIT_CONTEXT -DPERL_IMPLICIT_SYS -DUSE_PERLIO -DPERL_MSVCRT_READFIX',
    optimize='-MD -Zi -DNDEBUG -O1',
    cppflags='-DWIN32'
    ccversion='', gccversion='', gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
    d_longlong=undef, longlongsize=8, d_longdbl=define, longdblsize=10
    ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='__int64', lseeksize=8
    alignbytes=8, prototype=define
  Linker and Libraries:
    ld='link', ldflags ='-nologo -nodefaultlib -debug -opt:ref,icf  -libpath:"c:\perl\5.8.5\lib\CORE"  -machine:x86'
    libpth="C:\Programme\Microsoft Visual C++ Toolkit 2003\lib"
    libs=  oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib  comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib  netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib  version.lib odbc32.lib odbccp32.lib msvcrt.lib
    perllibs=  oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib  comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib  netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib  version.lib odbc32.lib odbccp32.lib msvcrt.lib
    libc=msvcrt.lib, so=dll, useshrplib=yes, libperl=perl58.lib
    gnulibc_version='undef'
  Dynamic Linking:
    dlsrc=dl_win32.xs, dlext=dll, d_dlsymun=undef, ccdlflags=' '
    cccdlflags=' ', lddlflags='-dll -nologo -nodefaultlib -debug -opt:ref,icf  -libpath:"c:\perl\5.8.5\lib\CORE"  -machine:x86'

• FAIL Script-Toolbox-0.12 MSWin32-x86-multi-thread 4.0 by corion-cpansmoker