develooper Front page | perl.cpan.testers | Postings from June 2008

FAIL Crypt-CFB-0.01 i686-linux 2.6.16.38

From:
chris
Date:
June 24, 2008 03:23
Subject:
FAIL Crypt-CFB-0.01 i686-linux 2.6.16.38
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/


--

Dear Matthias Bauer,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Tue Jun 24 10:22:26 2008] Trying to get 'ftp://ftp.funet.fi/pub/CPAN/authors/id/N/NU/NUFFIN/Crypt-EAX-0.02.tar.gz'
[MSG] [Tue Jun 24 10:22:29 2008] Trying to get 'ftp://ftp.funet.fi/pub/CPAN/authors/id/N/NU/NUFFIN/CHECKSUMS'
[MSG] [Tue Jun 24 10:22:31 2008] Checksum matches for 'Crypt-EAX-0.02.tar.gz'
[MSG] [Tue Jun 24 10:22:31 2008] Extracted 'Crypt-EAX-0.02/'
[MSG] [Tue Jun 24 10:22:31 2008] Extracted 'Crypt-EAX-0.02/lib/'
[MSG] [Tue Jun 24 10:22:31 2008] Extracted 'Crypt-EAX-0.02/lib/Crypt/'
[MSG] [Tue Jun 24 10:22:31 2008] Extracted 'Crypt-EAX-0.02/lib/Crypt/Ctr/'
[MSG] [Tue Jun 24 10:22:31 2008] Extracted 'Crypt-EAX-0.02/lib/Crypt/Ctr/FullWidth.pm'
[MSG] [Tue Jun 24 10:22:31 2008] Extracted 'Crypt-EAX-0.02/lib/Crypt/EAX.pm'
[MSG] [Tue Jun 24 10:22:31 2008] Extracted 'Crypt-EAX-0.02/Makefile.PL'
[MSG] [Tue Jun 24 10:22:31 2008] Extracted 'Crypt-EAX-0.02/MANIFEST'
[MSG] [Tue Jun 24 10:22:31 2008] Extracted 'Crypt-EAX-0.02/MANIFEST.SKIP'
[MSG] [Tue Jun 24 10:22:31 2008] Extracted 'Crypt-EAX-0.02/META.yml'
[MSG] [Tue Jun 24 10:22:31 2008] Extracted 'Crypt-EAX-0.02/SIGNATURE'
[MSG] [Tue Jun 24 10:22:31 2008] Extracted 'Crypt-EAX-0.02/t/'
[MSG] [Tue Jun 24 10:22:31 2008] Extracted 'Crypt-EAX-0.02/t/02_test_vectors.t'
[MSG] [Tue Jun 24 10:22:31 2008] Extracted 'Crypt::EAX' to '/home/cpan/blead/.cpanplus/5.11.0/build/Crypt-EAX-0.02'
[MSG] [Tue Jun 24 10:22:35 2008] Checking if your kit is complete...
Looks good
Warning: prerequisite Crypt::Ctr 0 not found.
Warning: prerequisite Digest::CMAC 0.04 not found.
Warning: prerequisite Test::use::ok 0 not found.
Writing Makefile for Crypt::EAX

[MSG] [Tue Jun 24 10:22:35 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Tue Jun 24 10:22:35 2008] Module 'Crypt::EAX' requires 'Crypt::Ctr' version '0' to be installed 
[MSG] [Tue Jun 24 10:22:35 2008] Module 'Crypt::EAX' requires 'Digest::CMAC' version '0.04' to be installed 
[MSG] [Tue Jun 24 10:22:35 2008] Module 'Crypt::EAX' requires 'Test::use::ok' version '0' to be installed 
[MSG] [Tue Jun 24 10:22:35 2008] Trying to get 'ftp://ftp.funet.fi/pub/CPAN/authors/id/B/BA/BAUERM/Crypt-Ctr-0.01.tar.gz'
[MSG] [Tue Jun 24 10:22:38 2008] Trying to get 'ftp://ftp.funet.fi/pub/CPAN/authors/id/B/BA/BAUERM/CHECKSUMS'
[MSG] [Tue Jun 24 10:22:44 2008] Checksum matches for 'Crypt-Ctr-0.01.tar.gz'
[MSG] [Tue Jun 24 10:22:44 2008] Extracted 'Crypt-Ctr-0.01/'
[MSG] [Tue Jun 24 10:22:44 2008] Extracted 'Crypt-Ctr-0.01/Makefile.PL'
[MSG] [Tue Jun 24 10:22:44 2008] Extracted 'Crypt-Ctr-0.01/Changes'
[MSG] [Tue Jun 24 10:22:44 2008] Extracted 'Crypt-Ctr-0.01/test.pl'
[MSG] [Tue Jun 24 10:22:44 2008] Extracted 'Crypt-Ctr-0.01/Ctr.pm'
[MSG] [Tue Jun 24 10:22:44 2008] Extracted 'Crypt-Ctr-0.01/MANIFEST'
[MSG] [Tue Jun 24 10:22:44 2008] Extracted 'Crypt::Ctr' to '/home/cpan/blead/.cpanplus/5.11.0/build/Crypt-Ctr-0.01'
[MSG] [Tue Jun 24 10:22:51 2008] Checking if your kit is complete...
Looks good
Warning: prerequisite Crypt::CFB 0 not found.
Writing Makefile for Crypt::Ctr

[MSG] [Tue Jun 24 10:22:51 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Tue Jun 24 10:22:51 2008] Module 'Crypt::Ctr' requires 'Crypt::CFB' version '0' to be installed 
[MSG] [Tue Jun 24 10:22:51 2008] Trying to get 'ftp://ftp.funet.fi/pub/CPAN/authors/id/B/BA/BAUERM/Crypt-CFB-0.01.tar.gz'
[MSG] [Tue Jun 24 10:22:58 2008] Trying to get 'ftp://ftp.funet.fi/pub/CPAN/authors/id/B/BA/BAUERM/CHECKSUMS'
[MSG] [Tue Jun 24 10:22:59 2008] Checksum matches for 'Crypt-CFB-0.01.tar.gz'
[MSG] [Tue Jun 24 10:22:59 2008] Extracted 'Crypt-CFB-0.01/'
[MSG] [Tue Jun 24 10:22:59 2008] Extracted 'Crypt-CFB-0.01/Makefile.PL'
[MSG] [Tue Jun 24 10:22:59 2008] Extracted 'Crypt-CFB-0.01/Changes'
[MSG] [Tue Jun 24 10:22:59 2008] Extracted 'Crypt-CFB-0.01/test.pl'
[MSG] [Tue Jun 24 10:22:59 2008] Extracted 'Crypt-CFB-0.01/README'
[MSG] [Tue Jun 24 10:22:59 2008] Extracted 'Crypt-CFB-0.01/CFB.pm'
[MSG] [Tue Jun 24 10:22:59 2008] Extracted 'Crypt-CFB-0.01/MANIFEST'
[MSG] [Tue Jun 24 10:22:59 2008] Extracted 'Crypt::CFB' to '/home/cpan/blead/.cpanplus/5.11.0/build/Crypt-CFB-0.01'
[MSG] [Tue Jun 24 10:23:03 2008] Checking if your kit is complete...
Looks good
Writing Makefile for Crypt::CFB

[MSG] [Tue Jun 24 10:23:03 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Tue Jun 24 10:23:06 2008] cp CFB.pm blib/lib/Crypt/CFB.pm
Manifying blib/man3/Crypt::CFB.3

[ERROR] [Tue Jun 24 10:23:09 2008] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /home/cpan/blead/bin/perl5.11.0 "-Iblib/lib" "-Iblib/arch" test.pl

Seems as if we can use the following Crypt/Digest modules:
Digest::MD5
Digest::SHA1
1 .. 5
ok 1
ok 2
ok 3
Could not instantiate Digest::SHA1: No such file or directory at blib/lib/Crypt/CFB.pm line 54, <DATA> line 14.
make: *** [test_dynamic] Error 2

[MSG] [Tue Jun 24 10:23:09 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'


******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.0307. Powered by POE::Component::CPAN::YACSmoke.

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    LANG = en_GB.UTF-8
    PATH = /usr/local/bin:/bin:/usr/bin:/usr/X11/bin
    PERL5LIB = :/home/cpan/blead/.cpanplus/5.11.0/build/Crypt-CFB-0.01/blib/lib:/home/cpan/blead/.cpanplus/5.11.0/build/Crypt-CFB-0.01/blib/arch:/home/cpan/blead/.cpanplus/5.11.0/build/Crypt-CFB-0.01/blib
    PERL5_CPANPLUS_IS_RUNNING = 7027
    PERL5_CPANPLUS_IS_VERSION = 0.84
    PERL_MM_USE_DEFAULT = 1
    SHELL = /bin/bash
    TERM = screen.linux

Perl special variables (and OS-specific diagnostics, for MSWin32):

    Perl: $^X = /home/cpan/blead/bin/perl5.11.0
    UID:  $<  = 1000
    EUID: $>  = 1000
    GID:  $(  = 100 100
    EGID: $)  = 100 100


-------------------------------


--

Summary of my perl5 (revision 5 version 11 subversion 0 patch 34080) configuration:
  Platform:
    osname=linux, osvers=2.6.16.38, archname=i686-linux
    uname='linux scratch 2.6.16.38 #1 preempt thu feb 22 16:04:10 gmt 2007 i686 athlon-4 i386 gnulinux '
    config_args='-de -Dusedevel -Dprefix=/home/cpan/blead'
    hint=recommended, useposix=true, d_sigaction=define
    useithreads=undef, usemultiplicity=undef
    useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
    use64bitint=undef, use64bitall=undef, uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
    optimize='-O2',
    cppflags='-fno-strict-aliasing -pipe -I/usr/local/include'
    ccversion='', gccversion='4.0.3', gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
    ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=4, prototype=define
  Linker and Libraries:
    ld='cc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib
    libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lc -lgdbm_compat
    perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc
    libc=/lib/libc-2.3.6.so, so=so, useshrplib=false, libperl=libperl.a
    gnulibc_version='2.3.6'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
    cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib'



Comments to Ask Bjørn Hansen at ask@perl.org | Group listing | About