Front page | perl.cpan.testers |
Postings from May 2008
FAIL DBD-mysql-4.007 darwin-2level 7.9.0
Thread Previous
From:
JJ
Date:
May 28, 2008 03:40
Subject:
FAIL DBD-mysql-4.007 darwin-2level 7.9.0
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
--
Dear Patrick Galbraith,
This is a computer-generated report for DBD-mysql-4.007
on perl 5.8.2, created by CPAN-Reporter-1.15.
Thank you for uploading your work to CPAN. However, there was a problem
testing your distribution.
If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:
http://cpantest.grango.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/Users/jj/perl/perl-5.8.2/bin/perl Makefile.PL':
Can't exec "mysql_config": No such file or directory at Makefile.PL line 76.
Cannot find the file 'mysql_config'! Your execution PATH doesn't seem
not contain the path to mysql_config. Resorting to guessed values!
Can't exec "mysql_config": No such file or directory at Makefile.PL line 466.
Can't find mysql_config. Use --mysql_config option to specify where mysql_config is located
Can't exec "mysql_config": No such file or directory at Makefile.PL line 466.
Can't find mysql_config. Use --mysql_config option to specify where mysql_config is located
Can't exec "mysql_config": No such file or directory at Makefile.PL line 466.
Can't find mysql_config. Use --mysql_config option to specify where mysql_config is located
PLEASE NOTE:
For 'make test' to run properly, you must ensure that the
database user 'jj' can connect to your MySQL server
and has the proper privileges that these tests require such
as 'drop table', 'create table', 'drop procedure', 'create procedure'
as well as others.
mysql> grant all privileges on test.* to 'jj'@'localhost' identified by 's3kr1t';
You can also optionally set the user to run 'make test' with:
perl Makefile.pl --testuser=username
Can't exec "mysql_config": No such file or directory at Makefile.PL line 466.
Can't find mysql_config. Use --mysql_config option to specify where mysql_config is located
Can't exec "mysql_config": No such file or directory at Makefile.PL line 466.
Can't find mysql_config. Use --mysql_config option to specify where mysql_config is located
Can't exec "mysql_config": No such file or directory at Makefile.PL line 466.
Failed to determine directory of mysql.h. Use
perl Makefile.PL --cflags=-I<dir>
to set this directory. For details see the INSTALL.html file,
section "C Compiler flags" or type
perl Makefile.PL --help
Can't find mysql_config. Use --mysql_config option to specify where mysql_config is located
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
No requirements found
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
PATH = /Users/jj/bin:/bin:/sbin:/usr/bin:/usr/sbin
PERL5LIB = /Users/jj/perl/perl-5.8.2/lib/5.8.2
PERL5OPT = -MCPAN::PERL5INC=yaml_module,YAML,tempfile,/tmp/cpan_perl5inc_UzHH.txt
PERL5_CPANPLUS_IS_RUNNING = 14451
PERL5_CPAN_IS_EXECUTING = /Users/jj/perl/perl-5.8.2/cpan/build/DBD-mysql-4.007-KtAH2B/Makefile.PL
PERL5_CPAN_IS_RUNNING = 14451
PERL5_CPAN_IS_RUNNING_IN_RECURSION = 24998,14451
PERL_CR_SMOKER_CURRENT = HTML-Tested-ClassDBI-0.17
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = xterm-color
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /Users/jj/perl/perl-5.8.2/bin/perl
$UID/$EUID = 501 / 501
$GID = 501 81 80 79 501
$EGID = 501 81 80 79 501
Perl module toolchain versions installed:
Module Have
------------------- -------
CPAN 1.92_62
Cwd 3.2701
ExtUtils::CBuilder 0.23
ExtUtils::Command 1.13
ExtUtils::Install 1.45
ExtUtils::MakeMaker 6.44
ExtUtils::Manifest 1.51
ExtUtils::ParseXS n/a
File::Spec 3.2701
Module::Build 0.2808
Module::Signature n/a
Test::Harness 3.10
Test::More 0.80
YAML 0.66
YAML::Syck 1.04
version 0.74
--
Summary of my perl5 (revision 5.0 version 8 subversion 2) configuration:
Platform:
osname=darwin, osvers=7.9.0, archname=darwin-2level
uname='darwin peladon.local 7.9.0 darwin kernel version 7.9.0: wed mar 30 20:11:17 pst 2005; root:xnuxnu-517.12.7.obj~1release_ppc power macintosh powerpc '
config_args='-de -Dprefix=/Users/jj/perl/perl-5.8.2'
hint=recommended, useposix=true, d_sigaction=define
usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=undef use64bitall=undef uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-pipe -fno-common -DPERL_DARWIN -no-cpp-precomp -fno-strict-aliasing',
optimize='-Os',
cppflags='-no-cpp-precomp -pipe -fno-common -DPERL_DARWIN -no-cpp-precomp -fno-strict-aliasing'
ccversion='', gccversion='3.3 20030304 (Apple Computer, Inc. build 1666)', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=4321
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=8
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='env MACOSX_DEPLOYMENT_TARGET=10.3 cc', ldflags =''
libpth=/usr/lib
libs=-ldbm -ldl -lm -lc
perllibs=-ldl -lm -lc
libc=/usr/lib/libc.dylib, so=dylib, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dyld.xs, dlext=bundle, d_dlsymun=undef, ccdlflags=' '
cccdlflags=' ', lddlflags=' -bundle -undefined dynamic_lookup'
Thread Previous