Front page | perl.cpan.testers |
Postings from May 2008
FAIL IO-AIO-Util-0.06 x86_64-linux-thread-multi-ld 2.6.22.10
Thread Previous
From:
imacat
Date:
May 24, 2008 09:11
Subject:
FAIL IO-AIO-Util-0.06 x86_64-linux-thread-multi-ld 2.6.22.10
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear GRAY,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Sun May 25 00:10:23 2008] Trying to get 'http://www.cpan.org/authors/id/G/GR/GRAY/CHECKSUMS'
[MSG] [Sun May 25 00:10:25 2008] Checksum matches for 'IO-AIO-Util-0.06.tar.gz'
[MSG] [Sun May 25 00:10:25 2008] Extracted 'IO-AIO-Util-0.06/'
[MSG] [Sun May 25 00:10:25 2008] Extracted 'IO-AIO-Util-0.06/Changes'
[MSG] [Sun May 25 00:10:25 2008] Extracted 'IO-AIO-Util-0.06/MANIFEST'
[MSG] [Sun May 25 00:10:25 2008] Extracted 'IO-AIO-Util-0.06/META.yml'
[MSG] [Sun May 25 00:10:25 2008] Extracted 'IO-AIO-Util-0.06/Makefile.PL'
[MSG] [Sun May 25 00:10:25 2008] Extracted 'IO-AIO-Util-0.06/README'
[MSG] [Sun May 25 00:10:25 2008] Extracted 'IO-AIO-Util-0.06/lib/'
[MSG] [Sun May 25 00:10:25 2008] Extracted 'IO-AIO-Util-0.06/lib/IO/'
[MSG] [Sun May 25 00:10:25 2008] Extracted 'IO-AIO-Util-0.06/lib/IO/AIO/'
[MSG] [Sun May 25 00:10:25 2008] Extracted 'IO-AIO-Util-0.06/lib/IO/AIO/Util.pm'
[MSG] [Sun May 25 00:10:25 2008] Extracted 'IO-AIO-Util-0.06/t/'
[MSG] [Sun May 25 00:10:25 2008] Extracted 'IO-AIO-Util-0.06/t/00_load.t'
[MSG] [Sun May 25 00:10:25 2008] Extracted 'IO-AIO-Util-0.06/t/01_mkpath.t'
[MSG] [Sun May 25 00:10:25 2008] Extracted 'IO-AIO-Util-0.06/t/99_kwalitee.t'
[MSG] [Sun May 25 00:10:25 2008] Extracted 'IO-AIO-Util-0.06/t/99_pod.t'
[MSG] [Sun May 25 00:10:25 2008] Extracted 'IO-AIO-Util-0.06/t/99_pod_coverage.t'
[MSG] [Sun May 25 00:10:25 2008] Extracted 'IO::AIO::Util' to '/opt/perl/testers/5.8.8/.cpanplus/5.8.8/build/IO-AIO-Util-0.06'
[MSG] [Sun May 25 00:10:25 2008] Checking if your kit is complete...
Looks good
Warning: prerequisite IO::AIO 2 not found.
Writing Makefile for IO-AIO-Util
[MSG] [Sun May 25 00:10:25 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Sun May 25 00:10:25 2008] Module 'IO::AIO::Util' requires 'IO::AIO' version '2' to be installed
[MSG] [Sun May 25 00:10:26 2008] Trying to get 'http://www.cpan.org/authors/id/M/ML/MLEHMANN/CHECKSUMS'
[MSG] [Sun May 25 00:10:29 2008] Checksum matches for 'IO-AIO-3.02.tar.gz'
[MSG] [Sun May 25 00:10:29 2008] Extracted 'IO-AIO-3.02/'
[MSG] [Sun May 25 00:10:29 2008] Extracted 'IO-AIO-3.02/t/'
[MSG] [Sun May 25 00:10:29 2008] Extracted 'IO-AIO-3.02/t/06_group.t'
[MSG] [Sun May 25 00:10:29 2008] Extracted 'IO-AIO-3.02/t/07_feeder.t'
[MSG] [Sun May 25 00:10:29 2008] Extracted 'IO-AIO-3.02/t/02_read.t'
[MSG] [Sun May 25 00:10:29 2008] Extracted 'IO-AIO-3.02/t/04_fork.t'
[MSG] [Sun May 25 00:10:29 2008] Extracted 'IO-AIO-3.02/t/05_readdir.t'
[MSG] [Sun May 25 00:10:29 2008] Extracted 'IO-AIO-3.02/t/03_errors.t'
[MSG] [Sun May 25 00:10:29 2008] Extracted 'IO-AIO-3.02/t/01_stat.t'
[MSG] [Sun May 25 00:10:29 2008] Extracted 'IO-AIO-3.02/t/aio_test_common.pm'
[MSG] [Sun May 25 00:10:29 2008] Extracted 'IO-AIO-3.02/t/00_load.t'
[MSG] [Sun May 25 00:10:29 2008] Extracted 'IO-AIO-3.02/README'
[MSG] [Sun May 25 00:10:29 2008] Extracted 'IO-AIO-3.02/configure'
[MSG] [Sun May 25 00:10:29 2008] Extracted 'IO-AIO-3.02/Changes'
[MSG] [Sun May 25 00:10:29 2008] Extracted 'IO-AIO-3.02/configure.ac'
[MSG] [Sun May 25 00:10:29 2008] Extracted 'IO-AIO-3.02/autogen.sh'
[MSG] [Sun May 25 00:10:29 2008] Extracted 'IO-AIO-3.02/Makefile.PL'
[MSG] [Sun May 25 00:10:29 2008] Extracted 'IO-AIO-3.02/libeio/'
[MSG] [Sun May 25 00:10:29 2008] Extracted 'IO-AIO-3.02/libeio/eio.c'
[MSG] [Sun May 25 00:10:29 2008] Extracted 'IO-AIO-3.02/libeio/eio.h'
[MSG] [Sun May 25 00:10:29 2008] Extracted 'IO-AIO-3.02/libeio/config.h.in'
[MSG] [Sun May 25 00:10:29 2008] Extracted 'IO-AIO-3.02/libeio/xthread.h'
[MSG] [Sun May 25 00:10:29 2008] Extracted 'IO-AIO-3.02/libeio/libeio.m4'
[MSG] [Sun May 25 00:10:29 2008] Extracted 'IO-AIO-3.02/META.yml'
[MSG] [Sun May 25 00:10:29 2008] Extracted 'IO-AIO-3.02/typemap'
[MSG] [Sun May 25 00:10:29 2008] Extracted 'IO-AIO-3.02/COPYING'
[MSG] [Sun May 25 00:10:29 2008] Extracted 'IO-AIO-3.02/AIO.pm'
[MSG] [Sun May 25 00:10:29 2008] Extracted 'IO-AIO-3.02/AIO.xs'
[MSG] [Sun May 25 00:10:29 2008] Extracted 'IO-AIO-3.02/MANIFEST'
[MSG] [Sun May 25 00:10:30 2008] Extracted 'IO::AIO' to '/opt/perl/testers/5.8.8/.cpanplus/5.8.8/build/IO-AIO-3.02'
[MSG] [Sun May 25 00:10:32 2008] checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for library containing pthread_create... none required
checking for futimes... yes
checking for readahead... yes
checking for fdatasync... yes
checking for pread and pwrite... yes
checking for readdir_r... yes
checking for sendfile... yes
configure: creating ./config.status
config.status: creating libeio/config.h
Checking if your kit is complete...
Looks good
Writing Makefile for IO::AIO
[MSG] [Sun May 25 00:10:32 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Sun May 25 00:10:37 2008] cp AIO.pm blib/lib/IO/AIO.pm
Running Mkbootstrap for IO::AIO ()
Manifying blib/man3/IO::AIO.3
[MSG] [Sun May 25 00:10:38 2008] MAKE TEST passed: t/00_load.........ok
t/01_stat.........ok
t/02_read.........ok
t/03_errors.......ok
t/04_fork.........ok
t/05_readdir......ok
t/06_group........ok
t/07_feeder.......ok
All tests successful.
Files=8, Tests=63, 0 wallclock secs ( 0.05 usr 0.01 sys + 0.19 cusr 0.06 csys = 0.31 CPU)
Result: PASS
[MSG] [Sun May 25 00:10:38 2008] Sending test report for 'IO-AIO-3.02'
[MSG] [Sun May 25 00:10:38 2008] Ok, not sending test report
[MSG] [Sun May 25 00:10:38 2008] cp lib/IO/AIO/Util.pm blib/lib/IO/AIO/Util.pm
Manifying blib/man3/IO::AIO::Util.3
[ERROR] [Sun May 25 00:10:40 2008] MAKE TEST failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) t/00_load..............ok
t/01_mkpath............
# Failed test 'new path: return status'
# at t/01_mkpath.t line 23.
# got: '-1'
# expected: '0'
# Failed test 'new path: errno'
# at t/01_mkpath.t line 24.
# Failed test 'new path: -d /opt/perl/testers/5.8.8/.cpanplus/5.8.8/home/tmp/lPOfqOK7co/dir1/dir2'
# at t/01_mkpath.t line 25.
# got: undef
# expected: '1'
# Failed test 'existing path: errno'
# at t/01_mkpath.t line 32.
# Looks like you failed 4 tests of 11.
Dubious, test returned 4 (wstat 1024, 0x400)
Failed 4/11 subtests
t/99_kwalitee..........skipped: author tests
t/99_pod...............skipped: author tests
t/99_pod_coverage......skipped: author tests
Test Summary Report
-------------------
t/01_mkpath.t (Wstat: 1024 Tests: 11 Failed: 4)
Failed tests: 1-3, 5
Non-zero exit status: 4
Files=5, Tests=13, 1 wallclock secs ( 0.02 usr 0.01 sys + 0.22 cusr 0.04 csys = 0.29 CPU)
Result: FAIL
Failed 1/5 test programs. 4/13 subtests failed.
make: *** [test_dynamic] Error 255
[MSG] [Sun May 25 00:10:40 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
File::Spec 3.2701 0
IO::AIO 3.02 2
Test::More 0.80 0
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPAN::YACSmoke 0.0307.
--
Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
Platform:
osname=linux, osvers=2.6.22.10, archname=x86_64-linux-thread-multi-ld
uname='linux rinse 2.6.22.10 #1 smp tue nov 20 02:36:22 cst 2007 x86_64 gnulinux '
config_args='-d -Dprefix=/opt/perl/testers/5.8.8 -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g -O3 -Dd_dosuid -Dinc_version_list=none -Acccdlflags=-fPIC -Duseshrplib=true -Dcf_email=imacat@mail.imacat.idv.tw'
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=define uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-g -O3',
cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include'
ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
alignbytes=16, prototype=define
Linker and Libraries:
ld='gcc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so
gnulibc_version='2.3.6'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/opt/perl/testers/5.8.8/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE'
cccdlflags=' -fPIC', lddlflags='-shared -L/usr/local/lib'
Thread Previous