Front page | perl.cpan.testers |
Postings from May 2008
FAIL Test-A8N-0.04 MSWin32-x86-multi-thread 5.1
From:
DAGOLDEN
Date:
May 16, 2008 00:26
Subject:
FAIL Test-A8N-0.04 MSWin32-x86-multi-thread 5.1
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear Michael A. Nachbaur,
This is a computer-generated report for Test-A8N-0.04
on perl 5.10.0, created by CPAN-Reporter-1.13.
Thank you for uploading your work to CPAN. However, there was a problem
testing your distribution.
If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:
http://cpantest.grango.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from 'C:\strawberry\c\bin\dmake.EXE test':
C:\strawberry\perl\bin\perl.exe -MExtUtils::Command -e cp scripts/a8-generate-fixture-list blib\script\a8-generate-fixture-list
pl2bat.bat blib\script\a8-generate-fixture-list
C:\strawberry\perl\bin\perl.exe -MExtUtils::Command -e cp scripts/a8it blib\script\a8it
pl2bat.bat blib\script\a8it
C:\strawberry\perl\bin\perl.exe -MExtUtils::Command -e cp scripts/a8-validate blib\script\a8-validate
pl2bat.bat blib\script\a8-validate
C:\strawberry\perl\bin\perl.exe -MExtUtils::Command -e cp scripts/a8-validate-all blib\script\a8-validate-all
pl2bat.bat blib\script\a8-validate-all
C:\strawberry\perl\bin\perl.exe -MExtUtils::Command -e cp scripts/a8-fixturedoc blib\script\a8-fixturedoc
pl2bat.bat blib\script\a8-fixturedoc
C:\strawberry\perl\bin\perl.exe "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib\lib', 'blib\arch')" t/*.t
t/00pod............skipped: set TEST_POD to enable this test
t/01fixup..........ok
t/02_testcase......
# Failed test 'bad config file throws an exception'
# at t/02_testcase.t line 124.
# expecting: Regexp ((?-xism:Can't load configuration file "t/testdata/cases/foo" for testcase "Test Name" in file "file name"))
# found: Can't load configuration file "t\testdata\cases\foo" for testcase "Test Name" in file "file name"; no such file. at C:\strawberry\cpan\build\Test-A8N-0.04-UaQIZQ\blib\lib/Test/A8N/TestCase.pm line 17.
# Looks like you failed 1 test of 45.
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/45 subtests
t/03_file..........ok
t/04_a8n...........ok
t/05_a8it..........
# Failed test 'expect empty output since no tests ran'
# at t/05_a8it.t line 45.
# got: 'Use of uninitialized value $home in concatenation (.) or string at scripts/a8it line 40.
# '
# expected: ''
# Failed test 'expect TAP output preamble for each file'
# at t/05_a8it.t line 49.
# 'Use of uninitialized value $home in concatenation (.) or string at scripts/a8it line 40.
# 1..32
# ok 1 - fixture1
# ok 2 - fixture2
# ok 3 - fixture3
# ok 4 - fixture4
# ok 5 - fixture1
# ok 6 - fixture2
# ok 7 - fixture3
# ok 8 - fixture4
# ok 9 - fixture1
# ok 10 - fixture2
# ok 11 - fixture3
# ok 12 - fixture4
# ok 13 - fixture1
# ok 14 - fixture2
# ok 15 - fixture3
# ok 16 - fixture4
# ok 17 - fixture1
# ok 18 - fixture2
# ok 19 - fixture3
# ok 20 - fixture4
# ok 21 - fixture1
# ok 22 - fixture2
# ok 23 - fixture3
# ok 24 - fixture4
# ok 25 - fixture1
# ok 26 - fixture2
# ok 27 - fixture1
# ok 28 - fixture2
# ok 29 - fixture1
# ok 30 - fixture2
# ok 31 - fixture1
# ok 32 - fixture2
# '
# doesn't match '(?-xism:^1\.\.\d+)'
# Failed test 'check actual TAP output'
# at t/05_a8it.t line 50.
# got: 'Use of uninitialized value $home in concatenation (.) or string at scripts/a8it line 40.
# 1..32
# ok 1 - fixture1
# ok 2 - fixture2
# ok 3 - fixture3
# ok 4 - fixture4
# ok 5 - fixture1
# ok 6 - fixture2
# ok 7 - fixture3
# ok 8 - fixture4
# ok 9 - fixture1
# ok 10 - fixture2
# ok 11 - fixture3
# ok 12 - fixture4
# ok 13 - fixture1
# ok 14 - fixture2
# ok 15 - fixture3
# ok 16 - fixture4
# ok 17 - fixture1
# ok 18 - fixture2
# ok 19 - fixture3
# ok 20 - fixture4
# ok 21 - fixture1
# ok 22 - fixture2
# ok 23 - fixture3
# ok 24 - fixture4
# ok 25 - fixture1
# ok 26 - fixture2
# ok 27 - fixture1
# ok 28 - fixture2
# ok 29 - fixture1
# ok 30 - fixture2
# ok 31 - fixture1
# ok 32 - fixture2
# '
# expected: '1..32
# ok 1 - fixture1
# ok 2 - fixture2
# ok 3 - fixture3
# ok 4 - fixture4
# ok 5 - fixture1
# ok 6 - fixture2
# ok 7 - fixture3
# ok 8 - fixture4
# ok 9 - fixture1
# ok 10 - fixture2
# ok 11 - fixture3
# ok 12 - fixture4
# ok 13 - fixture1
# ok 14 - fixture2
# ok 15 - fixture3
# ok 16 - fixture4
# ok 17 - fixture1
# ok 18 - fixture2
# ok 19 - fixture3
# ok 20 - fixture4
# ok 21 - fixture1
# ok 22 - fixture2
# ok 23 - fixture3
# ok 24 - fixture4
# ok 25 - fixture1
# ok 26 - fixture2
# ok 27 - fixture1
# ok 28 - fixture2
# ok 29 - fixture1
# ok 30 - fixture2
# ok 31 - fixture1
# ok 32 - fixture2
# '
# Failed test 'single file: check actual TAP output'
# at t/05_a8it.t line 54.
# got: 'Use of uninitialized value $home in concatenation (.) or string at scripts/a8it line 40.
# 1..4
# ok 1 - fixture1
# ok 2 - fixture2
# ok 3 - fixture3
# ok 4 - fixture4
# '
# expected: '1..4
# ok 1 - fixture1
# ok 2 - fixture2
# ok 3 - fixture3
# ok 4 - fixture4
# '
# Failed test 'multiple files: check actual TAP output'
# at t/05_a8it.t line 58.
# got: 'Use of uninitialized value $home in concatenation (.) or string at scripts/a8it line 40.
# 1..16
# ok 1 - fixture1
# ok 2 - fixture2
# ok 3 - fixture3
# ok 4 - fixture4
# ok 5 - fixture1
# ok 6 - fixture2
# ok 7 - fixture3
# ok 8 - fixture4
# ok 9 - fixture1
# ok 10 - fixture2
# ok 11 - fixture3
# ok 12 - fixture4
# ok 13 - fixture1
# ok 14 - fixture2
# ok 15 - fixture3
# ok 16 - fixture4
# '
# expected: '1..16
# ok 1 - fixture1
# ok 2 - fixture2
# ok 3 - fixture3
# ok 4 - fixture4
# ok 5 - fixture1
# ok 6 - fixture2
# ok 7 - fixture3
# ok 8 - fixture4
# ok 9 - fixture1
# ok 10 - fixture2
# ok 11 - fixture3
# ok 12 - fixture4
# ok 13 - fixture1
# ok 14 - fixture2
# ok 15 - fixture3
# ok 16 - fixture4
# '
# Failed test 'single verbose: check actual TAP output'
# at t/05_a8it.t line 66.
# got: 'Use of uninitialized value $home in concatenation (.) or string at scripts/a8it line 40.
# 1..4
# # START: "t/testdata/cases/test1.tc": some_test_case_1
# ok 1 - fixture1
# ok 2 - fixture2
# ok 3 - fixture3
# ok 4 - fixture4
# # FINISH: "t/testdata/cases/test1.tc": some_test_case_1
# '
# expected: '1..4
# # START: "t/testdata/cases/test1.tc": some_test_case_1
# ok 1 - fixture1
# ok 2 - fixture2
# ok 3 - fixture3
# ok 4 - fixture4
# # FINISH: "t/testdata/cases/test1.tc": some_test_case_1
# '
# Failed test 'double verbose: check actual TAP output'
# at t/05_a8it.t line 78.
# got: 'Use of uninitialized value $home in concatenation (.) or string at scripts/a8it line 40.
# 1..4
# # Using fixture class "Fixture"
# # START: "t/testdata/cases/test1.tc": some_test_case_1
# # Fixture method fixture1
# # Fixture method fixture2
# # Fixture method fixture3
# # Fixture method fixture4
# # Fixture method fixture1
# ok 1 - fixture1
# # Fixture method fixture2
# ok 2 - fixture2
# # Fixture method fixture3
# ok 3 - fixture3
# # Fixture method fixture4
# ok 4 - fixture4
# # FINISH: "t/testdata/cases/test1.tc": some_test_case_1
# '
# expected: '1..4
# # Using fixture class "Fixture"
# # START: "t/testdata/cases/test1.tc": some_test_case_1
# # Fixture method fixture1
# # Fixture method fixture2
# # Fixture method fixture3
# # Fixture method fixture4
# # Fixture method fixture1
# ok 1 - fixture1
# # Fixture method fixture2
# ok 2 - fixture2
# # Fixture method fixture3
# ok 3 - fixture3
# # Fixture method fixture4
# ok 4 - fixture4
# # FINISH: "t/testdata/cases/test1.tc": some_test_case_1
# '
# Failed test 'triple verbose: check actual TAP output'
# at t/05_a8it.t line 99.
# got: 'Use of uninitialized value $home in concatenation (.) or string at scripts/a8it line 40.
# # Attempting to load fixture class Fixture
# 1..4
# # Using fixture class "Fixture"
# # START: "t/testdata/cases/test1.tc": some_test_case_1
# # Fixture method fixture1
# # Fixture method fixture2
# # Fixture method fixture3
# # Fixture method fixture4
# # Fixture method fixture1
# ok 1 - fixture1
# # Fixture method fixture2
# ok 2 - fixture2
# # Fixture method fixture3
# ok 3 - fixture3
# # Fixture method fixture4
# ok 4 - fixture4
# # FINISH: "t/testdata/cases/test1.tc": some_test_case_1
# '
# expected: '# Attempting to load fixture class Fixture
# 1..4
# # Using fixture class "Fixture"
# # START: "t/testdata/cases/test1.tc": some_test_case_1
# # Fixture method fixture1
# # Fixture method fixture2
# # Fixture method fixture3
# # Fixture method fixture4
# # Fixture method fixture1
# ok 1 - fixture1
# # Fixture method fixture2
# ok 2 - fixture2
# # Fixture method fixture3
# ok 3 - fixture3
# # Fixture method fixture4
# ok 4 - fixture4
# # FINISH: "t/testdata/cases/test1.tc": some_test_case_1
# '
# Looks like you failed 8 tests of 26.
Dubious, test returned 8 (wstat 2048, 0x800)
Failed 8/26 subtests
(less 3 skipped subtests: 15 okay)
Test Summary Report
-------------------
t/02_testcase.t (Wstat: 256 Tests: 45 Failed: 1)
Failed test: 34
Non-zero exit status: 1
t/05_a8it.t (Wstat: 2048 Tests: 26 Failed: 8)
Failed tests: 4, 6-7, 9, 11, 13, 15, 17
Non-zero exit status: 8
Files=6, Tests=183, 53 wallclock secs ( 0.03 usr + 0.33 sys = 0.36 CPU)
Result: FAIL
Failed 2/6 test programs. 9/183 subtests failed.
dmake.EXE: Error code 136, while making 'test_dynamic'
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
-------------- ---- -----
File::Find 0 1.12
Module::Load 0 0.12
Moose 0.33 0.44
Pod::Usage 0 1.35
Test::Builder 0 0.78
Test::Deep 0 0.100
Test::FITesque 0.01 0.01
Test::More 0 0.78
WWW::Selenium 0 0.93
YAML::Syck 0.94 1.04
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
COMSPEC = C:\WINDOWS\system32\cmd.exe
INCLUDE = ;C:\strawberry\c\include;C:\strawberry\perl\lib\CORE;C:\strawberry\c\include;C:\strawberry\perl\lib\CORE
LIB = ;C:\strawberry\c\lib;C:\strawberry\perl\bin;C:\strawberry\c\lib;C:\strawberry\perl\bin
NUMBER_OF_PROCESSORS = 1
PATH = C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\bin;C:\strawberry\c\bin;C:\strawberry\perl\bin;C:\strawberry\c\bin;C:\strawberry\perl\bin
PERL5LIB = C:\strawberry\cpan\build\Moose-0.44-F9JwLg/blib/arch;C:\strawberry\cpan\build\Moose-0.44-F9JwLg/blib/lib;C:\strawberry\cpan\build\Sub-Exporter-0.979-oFRpjQ/blib/arch;C:\strawberry\cpan\build\Sub-Exporter-0.979-oFRpjQ/blib/lib;C:\strawberry\cpan\build\Data-OptList-0.103-95RLeE/blib/arch;C:\strawberry\cpan\build\Data-OptList-0.103-95RLeE/blib/lib;C:\strawberry\cpan\build\Sub-Install-0.924-3AJgi6/blib/arch;C:\strawberry\cpan\build\Sub-Install-0.924-3AJgi6/blib/lib;C:\strawberry\cpan\build\Class-MOP-0.55-eh21Hn/blib/arch;C:\strawberry\cpan\build\Class-MOP-0.55-eh21Hn/blib/lib;C:\strawberry\cpan\build\MRO-Compat-0.05-72JuHs/blib/arch;C:\strawberry\cpan\build\MRO-Compat-0.05-72JuHs/blib/lib;C:\strawberry\cpan\build\Sub-Name-0.03-P3exIQ/blib/arch;C:\strawberry\cpan\build\Sub-Name-0.03-P3exIQ/blib/lib;C:\strawberry\cpan\build\Test-LongString-0.11-_rjMt0/blib/arch;C:\strawberry\cpan\build\Test-LongString-0.11-_rjMt0/blib/lib;C:\strawberry\cpan\build\Test-WWW-Selenium-1.15-QI3U4D/blib/arch;C:\strawberry\cpan\build\Test-WWW-Selenium-1.15-QI3U4D/blib/lib;C:\strawberry\cpan\build\Test-Pod-1.26-805HP6/blib/arch;C:\strawberry\cpan\build\Test-Pod-1.26-805HP6/blib/lib;C:\strawberry\cpan\build\Test-Mock-LWP-0.05-DO2aEc/blib/arch;C:\strawberry\cpan\build\Test-Mock-LWP-0.05-DO2aEc/blib/lib;C:\strawberry\cpan\build\Test-MockObject-1.08-0M6Up9/blib/arch;C:\strawberry\cpan\build\Test-MockObject-1.08-0M6Up9/blib/lib;C:\strawberry\cpan\build\UNIVERSAL-can-1.12-x01Wk9/blib/arch;C:\strawberry\cpan\build\UNIVERSAL-can-1.12-x01Wk9/blib/lib;C:\strawberry\cpan\build\UNIVERSAL-isa-0.06-4ihTgl/blib/arch;C:\strawberry\cpan\build\UNIVERSAL-isa-0.06-4ihTgl/blib/lib;C:\strawberry\cpan\build\Test-FITesque-0.01-_omS_Z/blib/arch;C:\strawberry\cpan\build\Test-FITesque-0.01-_omS_Z/blib/lib;C:\strawberry\cpan\build\Class-Data-Inheritable-0.08-e9rEjG/blib/arch;C:\strawberry\cpan\build\Class-Data-Inheritable-0.08-e9rEjG/blib/lib
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 1820
PERL5_CPAN_IS_RUNNING = 1820
PERL5_CPAN_IS_RUNNING_IN_RECURSION = 900,1820
PERL_CR_SMOKER_CURRENT = Test-A8N-0.04
PERL_MM_USE_DEFAULT = 1
PROCESSOR_IDENTIFIER = x86 Family 6 Model 15 Stepping 6, GenuineIntel
TEMP = C:\DOCUME~1\David\LOCALS~1\Temp
TERM = dumb
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = C:\strawberry\perl\bin\perl.exe
$UID/$EUID = 0 / 0
$GID = 0
$EGID = 0
Win32::GetOSName = WinXP/.Net
Win32::GetOSVersion = Service Pack 2, 5, 1, 2600, 2, 2, 0, 768, 1
Win32::FsType = FAT32
Win32::IsAdminUser = 1
Perl module toolchain versions installed:
Module Have
------------------- ---------
CPAN 1.92_61
Cwd 3.2701
ExtUtils::CBuilder 0.21
ExtUtils::Command 1.14
ExtUtils::Install 1.50
ExtUtils::MakeMaker 6.44
ExtUtils::Manifest 1.51_01
ExtUtils::ParseXS 2.19
File::Spec 3.2701
Module::Build 0.2808_01
Module::Signature n/a
Test::Harness 3.10
Test::More 0.78
YAML 0.66
YAML::Syck 1.04
version 0.74
--
Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
Platform:
osname=MSWin32, osvers=5.1, archname=MSWin32-x86-multi-thread
uname=''
config_args='undef'
hint=recommended, useposix=true, d_sigaction=undef
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=undef, use64bitall=undef, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags =' -s -O2 -DWIN32 -DHAVE_DES_FCRYPT -DPERL_IMPLICIT_CONTEXT -DPERL_IMPLICIT_SYS -fno-strict-aliasing -DPERL_MSVCRT_READFIX',
optimize='-s -O2',
cppflags='-DWIN32'
ccversion='', gccversion='3.4.5', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
d_longlong=undef, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='long long', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='g++', ldflags ='-s -L"C:\strawberry\perl\lib\CORE" -L"C:\strawberry\c\lib"'
libpth=C:\strawberry\c\lib
libs= -lmsvcrt -lmoldname -lkernel32 -luser32 -lgdi32 -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 -loleaut32 -lnetapi32 -luuid -lws2_32 -lmpr -lwinmm -lversion -lodbc32 -lodbccp32
perllibs= -lmsvcrt -lmoldname -lkernel32 -luser32 -lgdi32 -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 -loleaut32 -lnetapi32 -luuid -lws2_32 -lmpr -lwinmm -lversion -lodbc32 -lodbccp32
libc=-lmsvcrt, so=dll, useshrplib=true, libperl=libperl510.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_win32.xs, dlext=dll, d_dlsymun=undef, ccdlflags=' '
cccdlflags=' ', lddlflags='-mdll -s -L"C:\strawberry\perl\lib\CORE" -L"C:\strawberry\c\lib"'
-
FAIL Test-A8N-0.04 MSWin32-x86-multi-thread 5.1
by DAGOLDEN