develooper Front page | perl.cpan.testers | Postings from May 2008

FAIL SAS-Parser-0.93 darwin-thread-multi-64int-2level 8.10.0

From:
chris
Date:
May 8, 2008 04:26
Subject:
FAIL SAS-Parser-0.93 darwin-thread-multi-64int-2level 8.10.0
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.

--

Dear MLF,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'fetch':

[MSG] [Thu May  8 12:25:54 2008] Trying to get 'http://www.cpan.org/authors/id/M/ML/MLF/SAS-Parser-0.93.tar.gz'
[MSG] [Thu May  8 12:26:04 2008] Trying to get 'http://www.cpan.org/authors/id/M/ML/MLF/CHECKSUMS'
[MSG] [Thu May  8 12:26:05 2008] Checksum matches for 'SAS-Parser-0.93.tar.gz'
[MSG] [Thu May  8 12:26:06 2008] Extracted 'SAS-Parser-0.93/'
[MSG] [Thu May  8 12:26:06 2008] Extracted 'SAS-Parser-0.93/bin/'
[MSG] [Thu May  8 12:26:06 2008] Extracted 'SAS-Parser-0.93/bin/sashead'
[MSG] [Thu May  8 12:26:06 2008] Extracted 'SAS-Parser-0.93/bin/parsesas'
[MSG] [Thu May  8 12:26:06 2008] Extracted 'SAS-Parser-0.93/bin/sasindx'
[MSG] [Thu May  8 12:26:06 2008] Extracted 'SAS-Parser-0.93/META.yml'
[MSG] [Thu May  8 12:26:06 2008] Extracted 'SAS-Parser-0.93/test.pl'
[MSG] [Thu May  8 12:26:06 2008] Extracted 'SAS-Parser-0.93/Changes'
[MSG] [Thu May  8 12:26:06 2008] Extracted 'SAS-Parser-0.93/MANIFEST'
[MSG] [Thu May  8 12:26:06 2008] Extracted 'SAS-Parser-0.93/lib/'
[MSG] [Thu May  8 12:26:06 2008] Extracted 'SAS-Parser-0.93/lib/SAS/'
[MSG] [Thu May  8 12:26:06 2008] Extracted 'SAS-Parser-0.93/lib/SAS/Parser.pm'
[MSG] [Thu May  8 12:26:06 2008] Extracted 'SAS-Parser-0.93/lib/SAS/Index.pm'
[MSG] [Thu May  8 12:26:06 2008] Extracted 'SAS-Parser-0.93/lib/SAS/Header.pm'
[MSG] [Thu May  8 12:26:06 2008] Extracted 'SAS-Parser-0.93/INSTALL'
[MSG] [Thu May  8 12:26:06 2008] Extracted 'SAS-Parser-0.93/Makefile.PL'
[MSG] [Thu May  8 12:26:06 2008] Extracted 'SAS-Parser-0.93/README'
[MSG] [Thu May  8 12:26:06 2008] Extracted 'SAS::Parser' to '/Volumes/Media/smoke/blead/.cpanplus/5.11.0/build/SAS-Parser-0.93'
[MSG] [Thu May  8 12:26:09 2008] Checking if your kit is complete...
Looks good
Writing Makefile for SAS::Parser

[MSG] [Thu May  8 12:26:09 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[ERROR] [Thu May  8 12:26:14 2008] MAKE failed: Illegal seek cp lib/SAS/Parser.pm blib/lib/SAS/Parser.pm
cp lib/SAS/Index.pm blib/lib/SAS/Index.pm
cp lib/SAS/Header.pm blib/lib/SAS/Header.pm
cp bin/* blib/script/*
usage: cp [-R [-H | -L | -P]] [-f | -i | -n] [-pv] src target
       cp [-R [-H | -L | -P]] [-f | -i | -n] [-pv] src1 ... srcN directory
make: *** [blib/script/*] Error 64


PREREQUISITES:

Here is a list of prerequisites you specified and versions we 
managed to load:
                                
	  Module Name                        Have     Want
	  Text::Balanced                    2.0.0      1.2

******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.0307. Powered by POE::Component::CPAN::YACSmoke.

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    PATH = /bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin
    PERL5_CPANPLUS_IS_RUNNING = 5092
    PERL5_CPANPLUS_IS_VERSION = 0.84
    PERL_MM_USE_DEFAULT = 1
    SHELL = /bin/bash
    TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

    Perl: $^X = /Volumes/Media/smoke/blead/bin/perl5.11.0
    UID:  $<  = 502
    EUID: $>  = 502
    GID:  $(  = 502 502
    EGID: $)  = 502 502


-------------------------------


--

Summary of my perl5 (revision 5 version 11 subversion 0 patch 33783) configuration:
  Platform:
    osname=darwin, osvers=8.10.0, archname=darwin-thread-multi-64int-2level
    uname='darwin afalglas.bingosnet.co.uk 8.10.0 darwin kernel version 8.10.0: wed may 23 16:50:59 pdt 2007; root:xnu-792.21.3~1release_ppc power macintosh powerpc '
    config_args='-de -Dusedevel -Dprefix=/Volumes/Media/smoke/blead -Dusethreads -Duse64bitint'
    hint=recommended, useposix=true, d_sigaction=define
    useithreads=define, usemultiplicity=define
    useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
    use64bitint=define, use64bitall=undef, uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-fno-common -DPERL_DARWIN -no-cpp-precomp -fno-strict-aliasing -pipe -I/usr/local/include',
    optimize='-O3',
    cppflags='-no-cpp-precomp -fno-common -DPERL_DARWIN -no-cpp-precomp -fno-strict-aliasing -pipe -I/usr/local/include'
    ccversion='', gccversion='4.0.1 (Apple Computer, Inc. build 5367)', gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=87654321
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
    ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=8, prototype=define
  Linker and Libraries:
    ld='env MACOSX_DEPLOYMENT_TARGET=10.3 cc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /usr/lib
    libs=-ldbm -ldl -lm -lc
    perllibs=-ldl -lm -lc
    libc=/usr/lib/libc.dylib, so=dylib, useshrplib=false, libperl=libperl.a
    gnulibc_version=''
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=bundle, d_dlsymun=undef, ccdlflags=' '
    cccdlflags=' ', lddlflags=' -bundle -undefined dynamic_lookup -L/usr/local/lib'



Comments to Ask Bjørn Hansen at ask@perl.org | Group listing | About