Front page | perl.cpan.testers |
Postings from May 2008
FAIL Cairo-1.060 MSWin32-x86-multi-thread 5.1
Thread Previous
|
Thread Next
From:
DAGOLDEN
Date:
May 5, 2008 11:49
Subject:
FAIL Cairo-1.060 MSWin32-x86-multi-thread 5.1
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear Torsten Schoenfeld,
This is a computer-generated report for Cairo-1.060
on perl 5.10.0, created by CPAN-Reporter-1.13.
Thank you for uploading your work to CPAN. However, there was a problem
testing your distribution.
If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:
http://cpantest.grango.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from 'C:\strawberry\perl\bin\perl.exe Makefile.PL':
This module requires ExtUtils::PkgConfig to install itself.
Install ExtUtils::PkgConfig from CPAN? [y] y
Database was generated on Mon, 05 May 2008 15:45:04 GMT
Running install for module 'ExtUtils::PkgConfig'
Running make for T/TS/TSCH/ExtUtils-PkgConfig-1.11.tar.gz
Checksum for C:\strawberry\cpan\sources\authors\id\T\TS\TSCH\ExtUtils-PkgConfig-1.11.tar.gz ok
CPAN.pm: Going to build T/TS/TSCH/ExtUtils-PkgConfig-1.11.tar.gz
'pkg-config' is not recognized as an internal or external command,
operable program or batch file.
***
*** ExtUtils::PkgConfig requires the pkg-config utility, but it doesn't
*** seem to be in your PATH. Is it correctly installed?
*** PATH=C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\bin;C:\strawberry\c\bin;C:\strawberry\perl\bin;C:\strawberry\c\bin;C:\strawberry\perl\bin
***
(C:\strawberry\perl\bin\perl.exe Makefile.PL exited with 0)
CPAN::Reporter: test results were not valid, No Makefile or Build file found.
No 'Makefile' created TSCH/ExtUtils-PkgConfig-1.11.tar.gz
C:\strawberry\perl\bin\perl.exe Makefile.PL -- NOT OK
Running make test
Make had some problems, won't test
Running make install
Make had some problems, won't install
Can't locate ExtUtils/PkgConfig.pm in @INC (@INC contains: C:\strawberry\cpan\build\ExtUtils-Depends-0.300-zhOfRt\blib\arch C:\strawberry\cpan\build\ExtUtils-Depends-0.300-zhOfRt\blib\lib C:\strawberry\cpan\build\ExtUtils-AutoInstall-0.63-LxHFgN\blib\arch C:\strawberry\cpan\build\ExtUtils-AutoInstall-0.63-LxHFgN\blib\lib C:\strawberry\perl\lib C:\strawberry\perl\site\lib C:\strawberry\cpan\build\Cairo-1.060-7KvU9p) at (eval 158) line 1.
BEGIN failed--compilation aborted at (eval 158) line 1.
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
No requirements found
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
COMSPEC = C:\WINDOWS\system32\cmd.exe
INCLUDE = ;C:\strawberry\c\include;C:\strawberry\perl\lib\CORE;C:\strawberry\c\include;C:\strawberry\perl\lib\CORE
LIB = ;C:\strawberry\c\lib;C:\strawberry\perl\bin;C:\strawberry\c\lib;C:\strawberry\perl\bin
NUMBER_OF_PROCESSORS = 1
PATH = C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\bin;C:\strawberry\c\bin;C:\strawberry\perl\bin;C:\strawberry\c\bin;C:\strawberry\perl\bin
PERL5LIB = C:\strawberry\cpan\build\ExtUtils-Depends-0.300-zhOfRt/blib/arch;C:\strawberry\cpan\build\ExtUtils-Depends-0.300-zhOfRt/blib/lib;C:\strawberry\cpan\build\ExtUtils-AutoInstall-0.63-LxHFgN/blib/arch;C:\strawberry\cpan\build\ExtUtils-AutoInstall-0.63-LxHFgN/blib/lib
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 828
PERL5_CPAN_IS_EXECUTING = C:\strawberry\cpan\build\Cairo-1.060-7KvU9p\Makefile.PL
PERL5_CPAN_IS_RUNNING = 828
PERL5_CPAN_IS_RUNNING_IN_RECURSION = 1572,828
PERL_CR_SMOKER_CURRENT = Gtk2-Net-LDAP-Widgets-2.0.1
PERL_MM_USE_DEFAULT = 1
PROCESSOR_IDENTIFIER = x86 Family 6 Model 15 Stepping 6, GenuineIntel
TEMP = C:\DOCUME~1\David\LOCALS~1\Temp
TERM = dumb
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = C:\strawberry\perl\bin\perl.exe
$UID/$EUID = 0 / 0
$GID = 0
$EGID = 0
Win32::GetOSName = WinXP/.Net
Win32::GetOSVersion = Service Pack 2, 5, 1, 2600, 2, 2, 0, 768, 1
Win32::FsType = FAT32
Win32::IsAdminUser = 1
Perl module toolchain versions installed:
Module Have
------------------- ---------
CPAN 1.92_61
Cwd 3.2701
ExtUtils::CBuilder 0.21
ExtUtils::Command 1.14
ExtUtils::Install 1.50
ExtUtils::MakeMaker 6.44
ExtUtils::Manifest 1.51_01
ExtUtils::ParseXS 2.19
File::Spec 3.2701
Module::Build 0.2808_01
Module::Signature n/a
Test::Harness 3.10
Test::More 0.78
YAML 0.66
YAML::Syck 1.04
version 0.74
--
Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
Platform:
osname=MSWin32, osvers=5.1, archname=MSWin32-x86-multi-thread
uname=''
config_args='undef'
hint=recommended, useposix=true, d_sigaction=undef
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=undef, use64bitall=undef, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags =' -s -O2 -DWIN32 -DHAVE_DES_FCRYPT -DPERL_IMPLICIT_CONTEXT -DPERL_IMPLICIT_SYS -fno-strict-aliasing -DPERL_MSVCRT_READFIX',
optimize='-s -O2',
cppflags='-DWIN32'
ccversion='', gccversion='3.4.5', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
d_longlong=undef, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='long long', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='g++', ldflags ='-s -L"C:\strawberry\perl\lib\CORE" -L"C:\strawberry\c\lib"'
libpth=C:\strawberry\c\lib
libs= -lmsvcrt -lmoldname -lkernel32 -luser32 -lgdi32 -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 -loleaut32 -lnetapi32 -luuid -lws2_32 -lmpr -lwinmm -lversion -lodbc32 -lodbccp32
perllibs= -lmsvcrt -lmoldname -lkernel32 -luser32 -lgdi32 -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 -loleaut32 -lnetapi32 -luuid -lws2_32 -lmpr -lwinmm -lversion -lodbc32 -lodbccp32
libc=-lmsvcrt, so=dll, useshrplib=true, libperl=libperl510.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_win32.xs, dlext=dll, d_dlsymun=undef, ccdlflags=' '
cccdlflags=' ', lddlflags='-mdll -s -L"C:\strawberry\perl\lib\CORE" -L"C:\strawberry\c\lib"'
Thread Previous
|
Thread Next