Front page | perl.cpan.testers |
Postings from April 2008
FAIL Schedule-Cron-Nofork-0.03 darwin-thread-multi-64int-2level8.10.0
From:
chris
Date:
April 22, 2008 11:38
Subject:
FAIL Schedule-Cron-Nofork-0.03 darwin-thread-multi-64int-2level8.10.0
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear CORION,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Tue Apr 22 19:33:10 2008] Trying to get 'http://www.cpan.org/authors/id/C/CO/CORION/Schedule-Cron-Nofork-0.03.tar.gz'
[MSG] [Tue Apr 22 19:33:19 2008] Trying to get 'http://www.cpan.org/authors/id/C/CO/CORION/CHECKSUMS'
[MSG] [Tue Apr 22 19:33:20 2008] Checksum matches for 'Schedule-Cron-Nofork-0.03.tar.gz'
[MSG] [Tue Apr 22 19:33:21 2008] Extracted 'Schedule-Cron-Nofork-0.03/'
[MSG] [Tue Apr 22 19:33:21 2008] Extracted 'Schedule-Cron-Nofork-0.03/Changes'
[MSG] [Tue Apr 22 19:33:21 2008] Extracted 'Schedule-Cron-Nofork-0.03/lib/'
[MSG] [Tue Apr 22 19:33:21 2008] Extracted 'Schedule-Cron-Nofork-0.03/lib/Schedule/'
[MSG] [Tue Apr 22 19:33:21 2008] Extracted 'Schedule-Cron-Nofork-0.03/lib/Schedule/Cron/'
[MSG] [Tue Apr 22 19:33:21 2008] Extracted 'Schedule-Cron-Nofork-0.03/lib/Schedule/Cron/Nofork.pm'
[MSG] [Tue Apr 22 19:33:21 2008] Extracted 'Schedule-Cron-Nofork-0.03/Makefile.PL'
[MSG] [Tue Apr 22 19:33:21 2008] Extracted 'Schedule-Cron-Nofork-0.03/MANIFEST'
[MSG] [Tue Apr 22 19:33:21 2008] Extracted 'Schedule-Cron-Nofork-0.03/README'
[MSG] [Tue Apr 22 19:33:21 2008] Extracted 'Schedule-Cron-Nofork-0.03/t/'
[MSG] [Tue Apr 22 19:33:21 2008] Extracted 'Schedule-Cron-Nofork-0.03/t/01-api.t'
[MSG] [Tue Apr 22 19:33:21 2008] Extracted 'Schedule-Cron-Nofork-0.03/t/embedded-Schedule-Cron-Nofork.t'
[MSG] [Tue Apr 22 19:33:21 2008] Extracted 'Schedule::Cron::Nofork' to '/Volumes/Media/smoke/blead/.cpanplus/5.11.0/build/Schedule-Cron-Nofork-0.03'
[MSG] [Tue Apr 22 19:33:24 2008] Test::Inline is nice for testing the examples, but not necessary
Checking if your kit is complete...
Looks good
Warning: prerequisite Schedule::Cron 0 not found.
Writing Makefile for Schedule::Cron::Nofork
[MSG] [Tue Apr 22 19:33:24 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Tue Apr 22 19:33:24 2008] Module 'Schedule::Cron::Nofork' requires 'Schedule::Cron' version '0' to be installed
[MSG] [Tue Apr 22 19:33:24 2008] Trying to get 'http://www.cpan.org/authors/id/R/RO/ROLAND/Schedule-Cron-0.97.tar.gz'
[MSG] [Tue Apr 22 19:33:25 2008] Trying to get 'http://www.cpan.org/authors/id/R/RO/ROLAND/CHECKSUMS'
[MSG] [Tue Apr 22 19:33:26 2008] Checksum matches for 'Schedule-Cron-0.97.tar.gz'
[MSG] [Tue Apr 22 19:33:27 2008] Extracted 'Schedule-Cron-0.97/'
[MSG] [Tue Apr 22 19:33:27 2008] Extracted 'Schedule-Cron-0.97/t/'
[MSG] [Tue Apr 22 19:33:27 2008] Extracted 'Schedule-Cron-0.97/t/callbackreschedule.t'
[MSG] [Tue Apr 22 19:33:27 2008] Extracted 'Schedule-Cron-0.97/t/entry.t'
[MSG] [Tue Apr 22 19:33:27 2008] Extracted 'Schedule-Cron-0.97/t/test.crontab'
[MSG] [Tue Apr 22 19:33:27 2008] Extracted 'Schedule-Cron-0.97/t/sighandler.t'
[MSG] [Tue Apr 22 19:33:27 2008] Extracted 'Schedule-Cron-0.97/t/execution_time.t'
[MSG] [Tue Apr 22 19:33:27 2008] Extracted 'Schedule-Cron-0.97/t/startup.t'
[MSG] [Tue Apr 22 19:33:27 2008] Extracted 'Schedule-Cron-0.97/t/load_crontab.t'
[MSG] [Tue Apr 22 19:33:27 2008] Extracted 'Schedule-Cron-0.97/t/nofork.t'
[MSG] [Tue Apr 22 19:33:27 2008] Extracted 'Schedule-Cron-0.97/README'
[MSG] [Tue Apr 22 19:33:27 2008] Extracted 'Schedule-Cron-0.97/Cron.pm'
[MSG] [Tue Apr 22 19:33:27 2008] Extracted 'Schedule-Cron-0.97/Makefile.PL'
[MSG] [Tue Apr 22 19:33:27 2008] Extracted 'Schedule-Cron-0.97/META.yml'
[MSG] [Tue Apr 22 19:33:27 2008] Extracted 'Schedule-Cron-0.97/CHANGES'
[MSG] [Tue Apr 22 19:33:27 2008] Extracted 'Schedule-Cron-0.97/ChangeLog'
[MSG] [Tue Apr 22 19:33:27 2008] Extracted 'Schedule-Cron-0.97/MANIFEST'
[MSG] [Tue Apr 22 19:33:27 2008] Extracted 'Schedule::Cron' to '/Volumes/Media/smoke/blead/.cpanplus/5.11.0/build/Schedule-Cron-0.97'
[MSG] [Tue Apr 22 19:33:30 2008] Checking if your kit is complete...
Looks good
Warning: prerequisite Time::ParseDate 99.00 not found.
Writing Makefile for Schedule::Cron
[MSG] [Tue Apr 22 19:33:30 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Tue Apr 22 19:33:30 2008] Module 'Schedule::Cron' requires 'Time::ParseDate' version '99.00' to be installed
[MSG] [Tue Apr 22 19:33:30 2008] Trying to get 'http://www.cpan.org/authors/id/M/MU/MUIR/modules/CHECKSUMS'
[MSG] [Tue Apr 22 19:33:31 2008] Checksum matches for 'Time-modules-2006.0814.tar.gz'
[MSG] [Tue Apr 22 19:33:32 2008] Extracted 'Time-modules-2006.0814/'
[MSG] [Tue Apr 22 19:33:32 2008] Extracted 'Time-modules-2006.0814/lib/'
[MSG] [Tue Apr 22 19:33:32 2008] Extracted 'Time-modules-2006.0814/lib/Time/'
[MSG] [Tue Apr 22 19:33:32 2008] Extracted 'Time-modules-2006.0814/lib/Time/JulianDay.pm'
[MSG] [Tue Apr 22 19:33:32 2008] Extracted 'Time-modules-2006.0814/lib/Time/ParseDate.pm'
[MSG] [Tue Apr 22 19:33:32 2008] Extracted 'Time-modules-2006.0814/lib/Time/CTime.pm'
[MSG] [Tue Apr 22 19:33:32 2008] Extracted 'Time-modules-2006.0814/lib/Time/DaysInMonth.pm'
[MSG] [Tue Apr 22 19:33:32 2008] Extracted 'Time-modules-2006.0814/lib/Time/Timezone.pm'
[MSG] [Tue Apr 22 19:33:32 2008] Extracted 'Time-modules-2006.0814/META.yml'
[MSG] [Tue Apr 22 19:33:32 2008] Extracted 'Time-modules-2006.0814/t/'
[MSG] [Tue Apr 22 19:33:32 2008] Extracted 'Time-modules-2006.0814/t/datetime.t'
[MSG] [Tue Apr 22 19:33:32 2008] Extracted 'Time-modules-2006.0814/CHANGELOG'
[MSG] [Tue Apr 22 19:33:32 2008] Extracted 'Time-modules-2006.0814/MANIFEST'
[MSG] [Tue Apr 22 19:33:32 2008] Extracted 'Time-modules-2006.0814/Makefile.PL'
[MSG] [Tue Apr 22 19:33:32 2008] Extracted 'Time-modules-2006.0814/README'
[MSG] [Tue Apr 22 19:33:33 2008] Extracted 'Time::ParseDate' to '/Volumes/Media/smoke/blead/.cpanplus/5.11.0/build/Time-modules-2006.0814'
[MSG] [Tue Apr 22 19:33:35 2008] Writing Makefile for Time-modules
[MSG] [Tue Apr 22 19:33:35 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Tue Apr 22 19:33:37 2008] Manifying blib/man3/Time::JulianDay.3
Manifying blib/man3/Time::ParseDate.3
Manifying blib/man3/Time::CTime.3
Manifying blib/man3/Time::DaysInMonth.3
Manifying blib/man3/Time::Timezone.3
[MSG] [Tue Apr 22 19:33:40 2008] MAKE TEST passed: PERL_DL_NONLAZY=1 /Volumes/Media/smoke/blead/bin/perl5.11.0 "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/datetime......Use of uninitialized value $ampm in uc at /Volumes/Media/smoke/blead/.cpanplus/5.11.0/build/Time-modules-2006.0814/blib/lib/Time/ParseDate.pm line 733.
Use of uninitialized value $ampm in uc at /Volumes/Media/smoke/blead/.cpanplus/5.11.0/build/Time-modules-2006.0814/blib/lib/Time/ParseDate.pm line 733.
Use of uninitialized value $ampm in uc at /Volumes/Media/smoke/blead/.cpanplus/5.11.0/build/Time-modules-2006.0814/blib/lib/Time/ParseDate.pm line 733.
ok
All tests successful.
Files=1, Tests=285, 1 wallclock secs ( 0.22 usr 0.03 sys + 0.39 cusr 0.05 csys = 0.69 CPU)
Result: PASS
[MSG] [Tue Apr 22 19:33:40 2008] Sending test report for 'Time-modules-2006.0814'
[MSG] [Tue Apr 22 19:33:40 2008] Ok, not sending test report
[MSG] [Tue Apr 22 19:33:47 2008] cp Cron.pm blib/lib/Schedule/Cron.pm
Manifying blib/man3/Schedule::Cron.3
[MSG] [Tue Apr 22 19:34:17 2008] MAKE TEST passed: PERL_DL_NONLAZY=1 /Volumes/Media/smoke/blead/bin/perl5.11.0 "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/callbackreschedule......ok
t/entry...................ok
t/execution_time..........Use of uninitialized value $ampm in uc at /Volumes/Media/smoke/blead/.cpanplus/5.11.0/build/Time-modules-2006.0814/blib/lib/Time/ParseDate.pm line 733, <DATA> line 47.
Use of uninitialized value $ampm in uc at /Volumes/Media/smoke/blead/.cpanplus/5.11.0/build/Time-modules-2006.0814/blib/lib/Time/ParseDate.pm line 733, <DATA> line 82.
Use of uninitialized value $ampm in uc at /Volumes/Media/smoke/blead/.cpanplus/5.11.0/build/Time-modules-2006.0814/blib/lib/Time/ParseDate.pm line 733, <DATA> line 82.
ok
t/load_crontab............ok
t/nofork..................ok
t/sighandler..............ok
t/startup.................ok
All tests successful.
Files=7, Tests=76, 28 wallclock secs ( 0.34 usr 0.13 sys + 3.13 cusr 0.66 csys = 4.26 CPU)
Result: PASS
[MSG] [Tue Apr 22 19:34:17 2008] Sending test report for 'Schedule-Cron-0.97'
[MSG] [Tue Apr 22 19:34:18 2008] Successfully sent 'pass' report for 'Schedule-Cron-0.97'
[MSG] [Tue Apr 22 19:34:24 2008] cp lib/Schedule/Cron/Nofork.pm blib/lib/Schedule/Cron/Nofork.pm
Manifying blib/man3/Schedule::Cron::Nofork.3
[ERROR] [Tue Apr 22 19:38:01 2008] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /Volumes/Media/smoke/blead/bin/perl5.11.0 "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/01-api.............................# Scheduling an entry for * * * * *, please stand by
Use of uninitialized value $dispatch in concatenation (.) or string at /Volumes/Media/smoke/blead/.cpanplus/5.11.0/build/Schedule-Cron-Nofork-0.03/blib/lib/Schedule/Cron/Nofork.pm line 19.
# Failed test 'Scheduled job was called'
# at t/01-api.t line 41.
# 'No subroutine provided with at /Volumes/Media/smoke/blead/.cpanplus/5.11.0/build/Schedule-Cron-Nofork-0.03/blib/lib/Schedule/Cron/Nofork.pm line 19.
# '
# doesn't match '/Cron job called/'
# Scheduling an entry for * * * * *, please stand by
Use of uninitialized value $dispatch in concatenation (.) or string at /Volumes/Media/smoke/blead/.cpanplus/5.11.0/build/Schedule-Cron-Nofork-0.03/blib/lib/Schedule/Cron/Nofork.pm line 19.
# Failed test 'Scheduled job was called'
# at t/01-api.t line 55.
# 'No subroutine provided with at /Volumes/Media/smoke/blead/.cpanplus/5.11.0/build/Schedule-Cron-Nofork-0.03/blib/lib/Schedule/Cron/Nofork.pm line 19.
# '
# doesn't match '/General dispatch called/'
# Failed test 'One job was dispatched'
# at t/01-api.t line 56.
# got: '0'
# expected: '1'
# Failed test 'General dispatch parameters[0]'
# at t/01-api.t line 57.
# got: undef
# expected: 'MESSAGE'
# Failed test 'General dispatch parameters[1]'
# at t/01-api.t line 58.
# got: undef
# expected: 'just testing'
# Scheduling two entries for * * * * *, please stand by
Use of uninitialized value $dispatch in concatenation (.) or string at /Volumes/Media/smoke/blead/.cpanplus/5.11.0/build/Schedule-Cron-Nofork-0.03/blib/lib/Schedule/Cron/Nofork.pm line 19.
# Failed test 'Scheduled job was called'
# at t/01-api.t line 73.
# 'No subroutine provided with at /Volumes/Media/smoke/blead/.cpanplus/5.11.0/build/Schedule-Cron-Nofork-0.03/blib/lib/Schedule/Cron/Nofork.pm line 19.
# '
# doesn't match '/General dispatch called/'
# Failed test 'Only one job was dispatched'
# at t/01-api.t line 74.
# got: '0'
# expected: '1'
# Failed test 'General dispatch parameters[0]'
# at t/01-api.t line 75.
# got: undef
# expected: 'MESSAGE'
Use of uninitialized value $this in pattern match (m//) at t/01-api.t line 76.
# Failed test 'General dispatch parameters[1]'
# at t/01-api.t line 76.
# undef
# doesn't match '/^just testing/'
# Scheduling three entries for * * * * *, please stand by
Use of uninitialized value $dispatch in concatenation (.) or string at /Volumes/Media/smoke/blead/.cpanplus/5.11.0/build/Schedule-Cron-Nofork-0.03/blib/lib/Schedule/Cron/Nofork.pm line 19.
# Failed test 'Scheduled cleanup was called'
# at t/01-api.t line 102.
# 'No subroutine provided with at /Volumes/Media/smoke/blead/.cpanplus/5.11.0/build/Schedule-Cron-Nofork-0.03/blib/lib/Schedule/Cron/Nofork.pm line 19.
# '
# doesn't match '/Work done/'
# Failed test 'All three jobs were dispatched'
# at t/01-api.t line 103.
# got: '0'
# expected: '3'
# Looks like you planned 21 tests but only ran 18.
# Looks like you failed 11 tests of 18 run.
Dubious, test returned 11 (wstat 2816, 0xb00)
Failed 14/21 subtests
t/embedded-Schedule-Cron-Nofork......ok
Test Summary Report
-------------------
t/01-api.t (Wstat: 2816 Tests: 18 Failed: 11)
Failed tests: 4, 6-9, 11-14, 16-17
Non-zero exit status: 11
Parse errors: Bad plan. You planned 21 tests but ran 18.
Files=2, Tests=19, 216 wallclock secs ( 0.08 usr 0.04 sys + 0.88 cusr 0.21 csys = 1.21 CPU)
Result: FAIL
Failed 1/2 test programs. 11/19 subtests failed.
make: *** [test_dynamic] Error 255
[MSG] [Tue Apr 22 19:38:01 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Schedule::Cron 0.97 0
Test::More 0.80 0
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPAN::YACSmoke 0.0307. Powered by POE::Component::CPAN::YACSmoke.
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
PATH = /bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin
PERL5LIB = :/Volumes/Media/smoke/blead/.cpanplus/5.11.0/build/Time-modules-2006.0814/blib/lib:/Volumes/Media/smoke/blead/.cpanplus/5.11.0/build/Time-modules-2006.0814/blib/arch:/Volumes/Media/smoke/blead/.cpanplus/5.11.0/build/Time-modules-2006.0814/blib:/Volumes/Media/smoke/blead/.cpanplus/5.11.0/build/Time-modules-2006.0814/blib/lib:/Volumes/Media/smoke/blead/.cpanplus/5.11.0/build/Time-modules-2006.0814/blib/arch:/Volumes/Media/smoke/blead/.cpanplus/5.11.0/build/Time-modules-2006.0814/blib:/Volumes/Media/smoke/blead/.cpanplus/5.11.0/build/Schedule-Cron-0.97/blib/lib:/Volumes/Media/smoke/blead/.cpanplus/5.11.0/build/Schedule-Cron-0.97/blib/arch:/Volumes/Media/smoke/blead/.cpanplus/5.11.0/build/Schedule-Cron-0.97/blib:/Volumes/Media/smoke/blead/.cpanplus/5.11.0/build/Schedule-Cron-0.97/blib/lib:/Volumes/Media/smoke/blead/.cpanplus/5.11.0/build/Schedule-Cron-0.97/blib/arch:/Volumes/Media/smoke/blead/.cpanplus/5.11.0/build/Schedule-Cron-0.97/blib:/Volumes/Media/smoke/blead/.cpanplus/5.11.0/build/Schedule-Cron-Nofork-0.03/blib/lib:/Volumes/Media/smoke/blead/.cpanplus/5.11.0/build/Schedule-Cron-Nofork-0.03/blib/arch:/Volumes/Media/smoke/blead/.cpanplus/5.11.0/build/Schedule-Cron-Nofork-0.03/blib
PERL5_CPANPLUS_IS_RUNNING = 7233
PERL5_CPANPLUS_IS_VERSION = 0.84
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /Volumes/Media/smoke/blead/bin/perl5.11.0
UID: $< = 502
EUID: $> = 502
GID: $( = 502 502
EGID: $) = 502 502
-------------------------------
--
Summary of my perl5 (revision 5 version 11 subversion 0 patch 33716) configuration:
Platform:
osname=darwin, osvers=8.10.0, archname=darwin-thread-multi-64int-2level
uname='darwin afalglas.bingosnet.co.uk 8.10.0 darwin kernel version 8.10.0: wed may 23 16:50:59 pdt 2007; root:xnu-792.21.3~1release_ppc power macintosh powerpc '
config_args='-de -Dusedevel -Dprefix=/Volumes/Media/smoke/blead -Duse64bitint -Dusethreads'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=undef, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fno-common -DPERL_DARWIN -no-cpp-precomp -fno-strict-aliasing -pipe -I/usr/local/include',
optimize='-O3',
cppflags='-no-cpp-precomp -fno-common -DPERL_DARWIN -no-cpp-precomp -fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='4.0.1 (Apple Computer, Inc. build 5367)', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=87654321
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='env MACOSX_DEPLOYMENT_TARGET=10.3 cc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib
libs=-ldbm -ldl -lm -lc
perllibs=-ldl -lm -lc
libc=/usr/lib/libc.dylib, so=dylib, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=bundle, d_dlsymun=undef, ccdlflags=' '
cccdlflags=' ', lddlflags=' -bundle -undefined dynamic_lookup -L/usr/local/lib'
-
FAIL Schedule-Cron-Nofork-0.03 darwin-thread-multi-64int-2level8.10.0
by chris