develooper Front page | perl.cpan.testers | Postings from April 2008

FAIL VCS_PVCS-0.02 darwin-thread-multi-64int-2level 8.10.0

From:
chris
Date:
April 20, 2008 11:09
Subject:
FAIL VCS_PVCS-0.02 darwin-thread-multi-64int-2level 8.10.0
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.

--

Dear BMIDD,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Sun Apr 20 19:08:36 2008] Trying to get 'http://www.cpan.org/authors/id/B/BM/BMIDD/VCS_PVCS-0.02.tar.gz'
[MSG] [Sun Apr 20 19:08:41 2008] Trying to get 'http://www.cpan.org/authors/id/B/BM/BMIDD/CHECKSUMS'
[MSG] [Sun Apr 20 19:08:42 2008] Checksum matches for 'VCS_PVCS-0.02.tar.gz'
[MSG] [Sun Apr 20 19:08:42 2008] Extracted 'VCS_PVCS-0.02/'
[MSG] [Sun Apr 20 19:08:42 2008] Extracted 'VCS_PVCS-0.02/README'
[MSG] [Sun Apr 20 19:08:42 2008] Extracted 'VCS_PVCS-0.02/Makefile.PL'
[MSG] [Sun Apr 20 19:08:42 2008] Extracted 'VCS_PVCS-0.02/Changes'
[MSG] [Sun Apr 20 19:08:43 2008] Extracted 'VCS_PVCS-0.02/MANIFEST'
[MSG] [Sun Apr 20 19:08:43 2008] Extracted 'VCS_PVCS-0.02/t/'
[MSG] [Sun Apr 20 19:08:43 2008] Extracted 'VCS_PVCS-0.02/t/01simple.t'
[MSG] [Sun Apr 20 19:08:43 2008] Extracted 'VCS_PVCS-0.02/t/blah'
[MSG] [Sun Apr 20 19:08:43 2008] Extracted 'VCS_PVCS-0.02/t/03project.t'
[MSG] [Sun Apr 20 19:08:43 2008] Extracted 'VCS_PVCS-0.02/t/04commands.t'
[MSG] [Sun Apr 20 19:08:43 2008] Extracted 'VCS_PVCS-0.02/t/00setup.t'
[MSG] [Sun Apr 20 19:08:43 2008] Extracted 'VCS_PVCS-0.02/t/02folder.t'
[MSG] [Sun Apr 20 19:08:43 2008] Extracted 'VCS_PVCS-0.02/t/PVCSPROJ/'
[MSG] [Sun Apr 20 19:08:43 2008] Extracted 'VCS_PVCS-0.02/t/PVCSPROJ/archives/'
[MSG] [Sun Apr 20 19:08:43 2008] Extracted 'VCS_PVCS-0.02/t/PVCSPROJ/archives/src/'
[MSG] [Sun Apr 20 19:08:43 2008] Extracted 'VCS_PVCS-0.02/t/PVCSPROJ/archives/src/foo'
[MSG] [Sun Apr 20 19:08:43 2008] Extracted 'VCS_PVCS-0.02/t/PVCSPROJ/MstrPrjc.prj/'
[MSG] [Sun Apr 20 19:08:43 2008] Extracted 'VCS_PVCS-0.02/t/PVCSPROJ/MstrPrjc.prj/pvcsfold.pub'
[MSG] [Sun Apr 20 19:08:43 2008] Extracted 'VCS_PVCS-0.02/t/PVCSPROJ/README'
[MSG] [Sun Apr 20 19:08:43 2008] Extracted 'VCS_PVCS-0.02/t/PVCSPROJ/MASTER.CFG'
[MSG] [Sun Apr 20 19:08:43 2008] Extracted 'VCS_PVCS-0.02/t/PVCSPROJ/PVCSWORK/'
[MSG] [Sun Apr 20 19:08:43 2008] Extracted 'VCS_PVCS-0.02/t/PVCSPROJ/PVCSWORK/src/'
[MSG] [Sun Apr 20 19:08:43 2008] Extracted 'VCS_PVCS-0.02/t/PVCSPROJ/PVCSWORK/src/foo'
[MSG] [Sun Apr 20 19:08:43 2008] Extracted 'VCS_PVCS-0.02/t/README'
[MSG] [Sun Apr 20 19:08:43 2008] Extracted 'VCS_PVCS-0.02/t/05cleanup.t'
[MSG] [Sun Apr 20 19:08:43 2008] Extracted 'VCS_PVCS-0.02/VCS/'
[MSG] [Sun Apr 20 19:08:43 2008] Extracted 'VCS_PVCS-0.02/VCS/PVCS/'
[MSG] [Sun Apr 20 19:08:43 2008] Extracted 'VCS_PVCS-0.02/VCS/PVCS/Commands.pm'
[MSG] [Sun Apr 20 19:08:43 2008] Extracted 'VCS_PVCS-0.02/VCS/PVCS/Folder.pm'
[MSG] [Sun Apr 20 19:08:43 2008] Extracted 'VCS_PVCS-0.02/VCS/PVCS/Project.pm'
[MSG] [Sun Apr 20 19:08:43 2008] Extracted 'VCS_PVCS-0.02/VCS/PVCS/Attributes.pm'
[MSG] [Sun Apr 20 19:08:43 2008] Extracted 'VCS_PVCS-0.02/VCS/PVCS/Archive.pm'
[MSG] [Sun Apr 20 19:08:43 2008] Extracted 'VCS_PVCS-0.02/VCS/PVCS.pm'
[MSG] [Sun Apr 20 19:08:43 2008] Extracted 'VCS_PVCS-0.02/TODO'
[MSG] [Sun Apr 20 19:08:43 2008] Extracted 'VCS_PVCS' to '/Volumes/Media/smoke/blead/.cpanplus/5.11.0/build/VCS_PVCS-0.02'
[MSG] [Sun Apr 20 19:08:44 2008] Checking if your kit is complete...
Looks good
Writing Makefile for VCS

[MSG] [Sun Apr 20 19:08:44 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Sun Apr 20 19:08:49 2008] cp VCS/PVCS/Commands.pm blib/lib/VCS/PVCS/Commands.pm
cp VCS/PVCS/Project.pm blib/lib/VCS/PVCS/Project.pm
cp VCS/PVCS/Archive.pm blib/lib/VCS/PVCS/Archive.pm
cp VCS/PVCS/Attributes.pm blib/lib/VCS/PVCS/Attributes.pm
cp VCS/PVCS/Folder.pm blib/lib/VCS/PVCS/Folder.pm
cp VCS/PVCS.pm blib/lib/VCS/PVCS.pm
Manifying blib/man3/VCS::PVCS::Project.3
Manifying blib/man3/VCS::PVCS::Commands.3
Manifying blib/man3/VCS::PVCS::Archive.3
Manifying blib/man3/VCS::PVCS::Folder.3
Manifying blib/man3/VCS::PVCS::Attributes.3
Manifying blib/man3/VCS::PVCS.3

[ERROR] [Sun Apr 20 19:08:51 2008] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /Volumes/Media/smoke/blead/bin/perl5.11.0 "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00setup.........ok
t/01simple........Cant find PVCS Binaries. Set PVCS_BINDIR in PVCS.pm or ENV.
 at /Volumes/Media/smoke/blead/.cpanplus/5.11.0/build/VCS_PVCS-0.02/blib/lib/VCS/PVCS/Project.pm line 257
Compilation failed in require at /Volumes/Media/smoke/blead/.cpanplus/5.11.0/build/VCS_PVCS-0.02/blib/lib/VCS/PVCS/Project.pm line 257.
BEGIN failed--compilation aborted at /Volumes/Media/smoke/blead/.cpanplus/5.11.0/build/VCS_PVCS-0.02/blib/lib/VCS/PVCS/Project.pm line 257.
Compilation failed in require at t/01simple.t line 9.
BEGIN failed--compilation aborted at t/01simple.t line 9.
 Dubious, test returned 2 (wstat 512, 0x200)
 No subtests run 
t/02folder........Cant find PVCS Binaries. Set PVCS_BINDIR in PVCS.pm or ENV.
 at /Volumes/Media/smoke/blead/.cpanplus/5.11.0/build/VCS_PVCS-0.02/blib/lib/VCS/PVCS/Project.pm line 257
Compilation failed in require at /Volumes/Media/smoke/blead/.cpanplus/5.11.0/build/VCS_PVCS-0.02/blib/lib/VCS/PVCS/Project.pm line 257.
BEGIN failed--compilation aborted at /Volumes/Media/smoke/blead/.cpanplus/5.11.0/build/VCS_PVCS-0.02/blib/lib/VCS/PVCS/Project.pm line 257.
Compilation failed in require at t/02folder.t line 7.
BEGIN failed--compilation aborted at t/02folder.t line 7.
 Dubious, test returned 2 (wstat 512, 0x200)
 No subtests run 
t/03project.......Cant find PVCS Binaries. Set PVCS_BINDIR in PVCS.pm or ENV.
 at /Volumes/Media/smoke/blead/.cpanplus/5.11.0/build/VCS_PVCS-0.02/blib/lib/VCS/PVCS/Project.pm line 257
Compilation failed in require at /Volumes/Media/smoke/blead/.cpanplus/5.11.0/build/VCS_PVCS-0.02/blib/lib/VCS/PVCS/Project.pm line 257.
BEGIN failed--compilation aborted at /Volumes/Media/smoke/blead/.cpanplus/5.11.0/build/VCS_PVCS-0.02/blib/lib/VCS/PVCS/Project.pm line 257.
Compilation failed in require at t/03project.t line 10.
BEGIN failed--compilation aborted at t/03project.t line 10.
 Dubious, test returned 2 (wstat 512, 0x200)
 No subtests run 
t/04commands......Cant find PVCS Binaries. Set PVCS_BINDIR in PVCS.pm or ENV.
 at t/04commands.t line 7
Compilation failed in require at t/04commands.t line 7.
BEGIN failed--compilation aborted at t/04commands.t line 7.
 Dubious, test returned 2 (wstat 512, 0x200)
 No subtests run 
t/05cleanup.......ok

Test Summary Report
-------------------
t/01simple.t  (Wstat: 512 Tests: 0 Failed: 0)
  Non-zero exit status: 2
  Parse errors: No plan found in TAP output
t/02folder.t  (Wstat: 512 Tests: 0 Failed: 0)
  Non-zero exit status: 2
  Parse errors: No plan found in TAP output
t/03project.t (Wstat: 512 Tests: 0 Failed: 0)
  Non-zero exit status: 2
  Parse errors: No plan found in TAP output
t/04commands.t (Wstat: 512 Tests: 0 Failed: 0)
  Non-zero exit status: 2
  Parse errors: No plan found in TAP output
Files=6, Tests=10,  1 wallclock secs ( 0.13 usr  0.08 sys +  0.82 cusr  0.31 csys =  1.34 CPU)
Result: FAIL
Failed 4/6 test programs. 0/10 subtests failed.
make: *** [test_dynamic] Error 255

[MSG] [Sun Apr 20 19:08:51 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'


******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.0307. Powered by POE::Component::CPAN::YACSmoke.

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    PATH = /bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin
    PERL5LIB = :/Volumes/Media/smoke/blead/.cpanplus/5.11.0/build/VCS_PVCS-0.02/blib/lib:/Volumes/Media/smoke/blead/.cpanplus/5.11.0/build/VCS_PVCS-0.02/blib/arch:/Volumes/Media/smoke/blead/.cpanplus/5.11.0/build/VCS_PVCS-0.02/blib
    PERL5_CPANPLUS_IS_RUNNING = 2901
    PERL5_CPANPLUS_IS_VERSION = 0.84
    PERL_MM_USE_DEFAULT = 1
    SHELL = /bin/bash
    TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

    Perl: $^X = /Volumes/Media/smoke/blead/bin/perl5.11.0
    UID:  $<  = 502
    EUID: $>  = 502
    GID:  $(  = 502 502
    EGID: $)  = 502 502


-------------------------------


--

Summary of my perl5 (revision 5 version 11 subversion 0 patch 33713) configuration:
  Platform:
    osname=darwin, osvers=8.10.0, archname=darwin-thread-multi-64int-2level
    uname='darwin afalglas.bingosnet.co.uk 8.10.0 darwin kernel version 8.10.0: wed may 23 16:50:59 pdt 2007; root:xnu-792.21.3~1release_ppc power macintosh powerpc '
    config_args='-de -Dusedevel -Dprefix=/Volumes/Media/smoke/blead -Duse64bitint -Dusethreads'
    hint=recommended, useposix=true, d_sigaction=define
    useithreads=define, usemultiplicity=define
    useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
    use64bitint=define, use64bitall=undef, uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-fno-common -DPERL_DARWIN -no-cpp-precomp -fno-strict-aliasing -pipe -I/usr/local/include',
    optimize='-O3',
    cppflags='-no-cpp-precomp -fno-common -DPERL_DARWIN -no-cpp-precomp -fno-strict-aliasing -pipe -I/usr/local/include'
    ccversion='', gccversion='4.0.1 (Apple Computer, Inc. build 5367)', gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=87654321
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
    ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=8, prototype=define
  Linker and Libraries:
    ld='env MACOSX_DEPLOYMENT_TARGET=10.3 cc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /usr/lib
    libs=-ldbm -ldl -lm -lc
    perllibs=-ldl -lm -lc
    libc=/usr/lib/libc.dylib, so=dylib, useshrplib=false, libperl=libperl.a
    gnulibc_version=''
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=bundle, d_dlsymun=undef, ccdlflags=' '
    cccdlflags=' ', lddlflags=' -bundle -undefined dynamic_lookup -L/usr/local/lib'



Comments to Ask Bjørn Hansen at ask@perl.org | Group listing | About