FAIL Cairo-1.060 x86_64-linux-thread-multi-ld 2.6.22.10

This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.

--
Dear Torsten Schoenfeld,
    
This is a computer-generated report for Cairo-1.060
on perl 5.10.0, created by CPAN-Reporter-1.13. 

Thank you for uploading your work to CPAN.  However, there was a problem
testing your distribution.

If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:

http://cpantest.grango.org/wiki/CPANAuthorNotes

Sections of this report:

    * Tester comments
    * Program output
    * Prerequisites
    * Environment and other context

------------------------------
TESTER COMMENTS
------------------------------

Additional comments from tester: 

this report is from an automated smoke testing program
and was not reviewed by a human for accuracy

------------------------------
PROGRAM OUTPUT
------------------------------

Output from '/opt/perl/testers/5.10.0/bin/perl Makefile.PL':

This module requires ExtUtils::Depends to install itself.
  Install ExtUtils::Depends from CPAN? [y] y
CPAN: File::HomeDir loaded ok (v0.69)
CPAN: Storable loaded ok (v2.18)
Going to read /opt/perl/testers/5.10.0/.cpan/build/home/.cpan/Metadata
  Database was generated on Fri, 18 Apr 2008 05:29:51 GMT
Going to read /srv/nfs/src/CPAN/authors/01mailrc.txt.gz
CPAN: Compress::Zlib loaded ok (v2.008)
CPAN: YAML loaded ok (v0.66)
............................................................................DONE
Going to read /srv/nfs/src/CPAN/modules/02packages.details.txt.gz
  Database was generated on Sat, 19 Apr 2008 21:29:53 GMT
CPAN: HTTP::Date loaded ok (v5.810)
............................................................................DONE
Going to read /srv/nfs/src/CPAN/modules/03modlist.data.gz
............................................................................DONE
Going to write /opt/perl/testers/5.10.0/.cpan/build/home/.cpan/Metadata
Running install for module 'ExtUtils::Depends'
Running make for T/TS/TSCH/ExtUtils-Depends-0.300.tar.gz
CPAN: Digest::SHA loaded ok (v5.45)
Checksum for /srv/nfs/src/CPAN/authors/id/T/TS/TSCH/ExtUtils-Depends-0.300.tar.gz ok
ExtUtils-Depends-0.300/
ExtUtils-Depends-0.300/t/
ExtUtils-Depends-0.300/t/02_save_load.t
ExtUtils-Depends-0.300/t/01_load.t
ExtUtils-Depends-0.300/t/inc/
ExtUtils-Depends-0.300/t/inc/DepTest/
ExtUtils-Depends-0.300/t/inc/DepTest/libDepTest.dll.a
ExtUtils-Depends-0.300/t/inc/DepTest/Install/
ExtUtils-Depends-0.300/t/inc/DepTest/Install/.keep
ExtUtils-Depends-0.300/t/inc/DepTest/DepTest.lib
ExtUtils-Depends-0.300/t/04_extra_libs.t
ExtUtils-Depends-0.300/t/03_deps.t
ExtUtils-Depends-0.300/META.yml
ExtUtils-Depends-0.300/Changes
ExtUtils-Depends-0.300/.cvsignore
ExtUtils-Depends-0.300/MANIFEST
ExtUtils-Depends-0.300/lib/
ExtUtils-Depends-0.300/lib/ExtUtils/
ExtUtils-Depends-0.300/lib/ExtUtils/Depends.pm
ExtUtils-Depends-0.300/perl-ExtUtils-Depends.spec.in
ExtUtils-Depends-0.300/Makefile.PL
ExtUtils-Depends-0.300/README
CPAN: File::Temp loaded ok (v0.20)

  CPAN.pm: Going to build T/TS/TSCH/ExtUtils-Depends-0.300.tar.gz

CPAN: CPAN::Reporter loaded ok (v1.13)
Checking if your kit is complete...
Looks good
Writing Makefile for ExtUtils::Depends
(/opt/perl/testers/5.10.0/bin/perl Makefile.PL exited with 0)
CPAN::Reporter: Makefile.PL result is 'pass', No errors.
cp lib/ExtUtils/Depends.pm blib/lib/ExtUtils/Depends.pm
Manifying blib/man3/ExtUtils::Depends.3
(/usr/bin/make exited with 0)
CPAN::Reporter: make result is 'pass', No errors.
  TSCH/ExtUtils-Depends-0.300.tar.gz
  /usr/bin/make -- OK
Running make test
PERL_DL_NONLAZY=1 /opt/perl/testers/5.10.0/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/01_load............ok
t/02_save_load.......ok
t/03_deps............ok
t/04_extra_libs......skipped: test only applicable to MSWin32 and cygwin
All tests successful.
Files=4, Tests=27,  1 wallclock secs ( 0.03 usr  0.00 sys +  0.43 cusr  0.03 csys =  0.49 CPU)
Result: PASS
(/usr/bin/make test exited with 0)
CPAN::Reporter: Test result is 'pass', All tests successful.
CPAN::Reporter: preparing a CPAN Testers report for ExtUtils-Depends-0.300

CPAN::Reporter: this appears to be a duplicate report for the test phase:
PASS ExtUtils-Depends-0.300 x86_64-linux-thread-multi-ld 2.6.22.10

Test report will not be sent.

  TSCH/ExtUtils-Depends-0.300.tar.gz
  /usr/bin/make test -- OK
Running make install
Prepending /opt/perl/testers/5.10.0/.cpan/build/home/.cpan/build/ExtUtils-Depends-0.300-8wOpKE/blib/arch /opt/perl/testers/5.10.0/.cpan/build/home/.cpan/build/ExtUtils-Depends-0.300-8wOpKE/blib/lib to PERL5LIB for 'install'
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ERROR: Can't create '/opt/perl/testers/5.10.0/lib/site_perl/5.10.0/ExtUtils'
mkdir /opt/perl/testers/5.10.0/lib/site_perl/5.10.0/ExtUtils: ©Úµ´¤£²ÅÅv­­ªº¾Þ§@ at /opt/perl/testers/5.10.0/lib/5.10.0/ExtUtils/Install.pm line 450

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 at -e line 1
make: *** [pure_site_install] Error 13
  TSCH/ExtUtils-Depends-0.300.tar.gz
  /usr/bin/make install  -- NOT OK
Can't locate ExtUtils/Depends.pm in @INC (@INC contains: /home/imacat/lib/perl5 /opt/perl/testers/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld /opt/perl/testers/5.10.0/lib/5.10.0 /opt/perl/testers/5.10.0/lib/site_perl/5.10.0/x86_64-linux-thread-multi-ld /opt/perl/testers/5.10.0/lib/site_perl/5.10.0 /opt/perl/testers/5.10.0/.cpan/build/build/Cairo-1.060-mpKr1V) at (eval 98) line 1.
BEGIN failed--compilation aborted at (eval 98) line 1.

------------------------------
PREREQUISITES
------------------------------

Prerequisite modules loaded:

    No requirements found

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    LANG = zh_TW
    LANGUAGE = zh_TW
    LC_ALL = zh_TW
    LC_COLLATE = zh_TW
    LC_CTYPE = zh_TW
    LC_MESSAGES = zh_TW
    LC_MONETARY = zh_TW
    LC_NUMERIC = zh_TW
    LC_TIME = zh_TW
    PATH = /home/imacat/bin:/bin:/usr/bin:/opt/java/bin:/usr/local/bin
    PERL5LIB = /home/imacat/lib/perl5
    PERL5_CPANPLUS_IS_RUNNING = 17125
    PERL5_CPAN_IS_EXECUTING = /opt/perl/testers/5.10.0/.cpan/build/build/Cairo-1.060-mpKr1V/Makefile.PL
    PERL5_CPAN_IS_RUNNING = 17125
    PERL_CPAN_REPORTER_DIR = /home/imacat/.cpanreporter
    PERL_MM_USE_DEFAULT = 1
    SHELL = /bin/zsh
    TERM = xterm
    TMPDIR = /opt/perl/testers/5.10.0/.cpan/build/home/tmp

Perl special variables (and OS-specific diagnostics, for MSWin32):

    $^X = /opt/perl/testers/5.10.0/bin/perl
    $UID/$EUID = 1000 / 1000
    $GID = 100 0 4 6 20 24 25 29 34 38 40 44 46 50 100 104 1000
    $EGID = 100 0 4 6 20 24 25 29 34 38 40 44 46 50 100 104 1000

Perl module toolchain versions installed:

    Module              Have     
    ------------------- ---------
    CPAN                1.9205   
    Cwd                 3.2701   
    ExtUtils::CBuilder  0.22     
    ExtUtils::Command   1.14     
    ExtUtils::Install   1.50     
    ExtUtils::MakeMaker 6.44     
    ExtUtils::Manifest  1.51_01  
    ExtUtils::ParseXS   2.19     
    File::Spec          3.2701   
    Module::Build       0.2808_01
    Module::Signature   0.55     
    Test::Harness       3.10     
    Test::More          0.80     
    YAML                0.66     
    YAML::Syck          n/a      
    version             0.74     


--

Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
  Platform:
    osname=linux, osvers=2.6.22.10, archname=x86_64-linux-thread-multi-ld
    uname='linux rinse 2.6.22.10 #1 smp tue nov 20 02:36:22 cst 2007 x86_64 gnulinux '
    config_args='-d -Dprefix=/opt/perl/testers/5.10.0 -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g -O3 -Dd_dosuid -Dinc_version_list=none -Duseshrplib=true -Dcf_email=imacat@mail.imacat.idv.tw'
    hint=recommended, useposix=true, d_sigaction=define
    useithreads=define, usemultiplicity=define
    useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
    use64bitint=define, use64bitall=define, uselongdouble=define
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
    optimize='-g -O3',
    cppflags='-D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include'
    ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers=''
    intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
    ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
    alignbytes=16, prototype=define
  Linker and Libraries:
    ld='gcc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib /lib64 /usr/lib64
    libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
    perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
    libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so
    gnulibc_version='2.3.6'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/opt/perl/testers/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld/CORE'
    cccdlflags='-fPIC', lddlflags='-shared -g -O3 -L/usr/local/lib'

• FAIL Cairo-1.060 x86_64-linux-thread-multi-ld 2.6.22.10 by imacat