Front page | perl.cpan.testers |
Postings from April 2008
FAIL DBD-mysql-4.006 x86_64-linux-thread-multi-ld 2.6.22.10
Thread Next
From:
imacat
Date:
April 18, 2008 18:09
Subject:
FAIL DBD-mysql-4.006 x86_64-linux-thread-multi-ld 2.6.22.10
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear Patrick Galbraith,
This is a computer-generated report for DBD-mysql-4.006
on perl 5.8.8, created by CPAN-Reporter-1.13.
Thank you for uploading your work to CPAN. However, there was a problem
testing your distribution.
If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:
http://cpantest.grango.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
PERL_DL_NONLAZY=1 /tmp/perl-mod_perl2/5.8.8/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00base................ok
t/10connect.............DBI connect('test','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/10connect.t line 25
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 2/2 subtests
t/20createdrop..........DBI connect('test','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/20createdrop.t line 21
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 4/4 subtests
t/25lockunlock..........DBI connect('test','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/25lockunlock.t line 48
Cannot connect: Access denied for user 'imacat'@'localhost' (using password: NO)
Either your server is not up and running or you have no
permissions for acessing the DSN DBI:mysql:test.
This test requires a running server and write permissions.
Please make sure your server is running and you have
permissions, then retry.
Dubious, test returned 10 (wstat 2560, 0xa00)
Failed 13/13 subtests
t/30insertfetch.........DBI connect('test','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/30insertfetch.t line 21
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 9/9 subtests
t/35limit...............DBI connect('test','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/35limit.t line 24
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 111/111 subtests
t/35prepare.............DBI connect('test','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/35prepare.t line 25
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 49/49 subtests
t/40bindparam...........DBI connect('test','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/40bindparam.t line 57
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/40bindparam2..........DBI connect('test','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/40bindparam2.t line 64
Cannot connect: Access denied for user 'imacat'@'localhost' (using password: NO)
Either your server is not up and running or you have no
permissions for acessing the DSN DBI:mysql:test.
This test requires a running server and write permissions.
Please make sure your server is running and you have
permissions, then retry.
Dubious, test returned 10 (wstat 2560, 0xa00)
Failed 13/13 subtests
t/40blobs...............DBI connect('test','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/40blobs.t line 64
Cannot connect: Access denied for user 'imacat'@'localhost' (using password: NO)
Either your server is not up and running or you have no
permissions for acessing the DSN DBI:mysql:test.
This test requires a running server and write permissions.
Please make sure your server is running and you have
permissions, then retry.
Dubious, test returned 10 (wstat 2560, 0xa00)
Failed 11/11 subtests
t/40catalog.............DBI connect('test','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/40catalog.t line 23
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/40keyinfo.............DBI connect('test','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/40keyinfo.t line 20
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 7/7 subtests
t/40listfields..........DBI connect('test','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/40listfields.t line 57
Cannot connect: Access denied for user 'imacat'@'localhost' (using password: NO)
Either your server is not up and running or you have no
permissions for acessing the DSN DBI:mysql:test.
This test requires a running server and write permissions.
Please make sure your server is running and you have
permissions, then retry.
Dubious, test returned 10 (wstat 2560, 0xa00)
Failed 19/19 subtests
t/40nulls...............DBI connect('test','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/40nulls.t line 50
Cannot connect: Access denied for user 'imacat'@'localhost' (using password: NO)
Either your server is not up and running or you have no
permissions for acessing the DSN DBI:mysql:test.
This test requires a running server and write permissions.
Please make sure your server is running and you have
permissions, then retry.
Dubious, test returned 10 (wstat 2560, 0xa00)
Failed 11/11 subtests
t/40numrows.............DBI connect('test','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/40numrows.t line 59
Cannot connect: Access denied for user 'imacat'@'localhost' (using password: NO)
Either your server is not up and running or you have no
permissions for acessing the DSN DBI:mysql:test.
This test requires a running server and write permissions.
Please make sure your server is running and you have
permissions, then retry.
Dubious, test returned 10 (wstat 2560, 0xa00)
Failed 25/25 subtests
t/40server_prepare......DBI connect('test;mysql_server_prepare=1','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/40server_prepare.t line 22
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 9/9 subtests
t/40types...............DBI connect('test','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/40types.t line 22
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/41bindparam...........DBI connect('test','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/41bindparam.t line 37
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 10/10 subtests
t/41blobs_prepare.......DBI connect('test','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/41blobs_prepare.t line 71
Cannot connect: Access denied for user 'imacat'@'localhost' (using password: NO)
Either your server is not up and running or you have no
permissions for acessing the DSN DBI:mysql:test.
This test requires a running server and write permissions.
Please make sure your server is running and you have
permissions, then retry.
Dubious, test returned 10 (wstat 2560, 0xa00)
Failed 24/24 subtests
t/42bindparam...........DBI connect('test','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/42bindparam.t line 37
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 11/11 subtests
t/50chopblanks..........DBI connect('test','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/50chopblanks.t line 57
Cannot connect: Access denied for user 'imacat'@'localhost' (using password: NO)
Either your server is not up and running or you have no
permissions for acessing the DSN DBI:mysql:test.
This test requires a running server and write permissions.
Please make sure your server is running and you have
permissions, then retry.
Dubious, test returned 10 (wstat 2560, 0xa00)
Failed 35/35 subtests
t/50commit..............DBI connect('test','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/50commit.t line 64
Can't call method "do" on an undefined value at t/50commit.t line 77.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 30/30 subtests
t/60leaks...............skipped: $ENV{SLOW_TESTS} is not set
t/65types...............DBI connect('test','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/65types.t line 37
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 20/20 subtests
t/70takeimp.............skipped: test feature not implemented
t/75supported_sql.......DBI connect('test','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/75supported_sql.t line 35
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 16/16 subtests
t/80procs...............DBI connect('test','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/80procs.t line 32
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/insertid..............DBI connect('test','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/insertid.t line 14
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 16/16 subtests
t/multi_statement.......DBI connect('test','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/multi_statement.t line 21
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 7/7 subtests
t/param_values..........DBI connect('test','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/param_values.t line 16
Can't call method "do" on an undefined value at t/param_values.t line 25.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 8/8 subtests
t/prepare_noerror.......DBI connect('test','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/prepare_noerror.t line 22
Can't call method "prepare" on an undefined value at t/prepare_noerror.t line 25.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/texecute..............DBI connect('test','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/texecute.t line 17
Can't call method "do" on an undefined value at t/texecute.t line 25.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 9/9 subtests
t/utf8..................DBI connect('test','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/utf8.t line 49
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/warnings..............DBI connect('test','',...) failed: Access denied for user 'imacat'@'localhost' (using password: NO) at t/warnings.t line 21
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 4/4 subtests
Test Summary Report
-------------------
t/10connect.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 2 tests but ran 0.
t/20createdrop.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 4 tests but ran 0.
t/25lockunlock.t (Wstat: 2560 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 10
Parse errors: Bad plan. You planned 13 tests but ran 1.
t/30insertfetch.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 9 tests but ran 0.
t/35limit.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 111 tests but ran 0.
t/35prepare.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 49 tests but ran 0.
t/40bindparam.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/40bindparam2.t (Wstat: 2560 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 10
Parse errors: Bad plan. You planned 13 tests but ran 1.
t/40blobs.t (Wstat: 2560 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 10
Parse errors: Bad plan. You planned 11 tests but ran 1.
t/40catalog.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/40keyinfo.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 7 tests but ran 0.
t/40listfields.t (Wstat: 2560 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 10
Parse errors: Bad plan. You planned 19 tests but ran 1.
t/40nulls.t (Wstat: 2560 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 10
Parse errors: Bad plan. You planned 11 tests but ran 1.
t/40numrows.t (Wstat: 2560 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 10
Parse errors: Bad plan. You planned 25 tests but ran 1.
t/40server_prepare.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 9 tests but ran 0.
t/40types.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/41bindparam.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 10 tests but ran 0.
t/41blobs_prepare.t (Wstat: 2560 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 10
Parse errors: Bad plan. You planned 24 tests but ran 1.
t/42bindparam.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 11 tests but ran 0.
t/50chopblanks.t (Wstat: 2560 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 10
Parse errors: Bad plan. You planned 35 tests but ran 1.
t/50commit.t (Wstat: 65280 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 255
Parse errors: Bad plan. You planned 30 tests but ran 1.
t/65types.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 20 tests but ran 0.
t/75supported_sql.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 16 tests but ran 0.
t/80procs.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/insertid.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 16 tests but ran 0.
t/multi_statement.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 7 tests but ran 0.
t/param_values.t (Wstat: 65280 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 255
Parse errors: Bad plan. You planned 8 tests but ran 1.
t/prepare_noerror.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/texecute.t (Wstat: 65280 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 255
Parse errors: Bad plan. You planned 9 tests but ran 1.
t/utf8.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/warnings.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 4 tests but ran 0.
Files=34, Tests=16, 3 wallclock secs ( 0.06 usr 0.06 sys + 2.22 cusr 0.39 csys = 2.73 CPU)
Result: FAIL
Failed 31/34 test programs. 11/16 subtests failed.
make: *** [test_dynamic] Error 255
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
------------ ---- --------
Data::Dumper 0 2.121_08
DBI 1.08 1.604
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = zh_TW
LANGUAGE = zh_TW
LC_ALL = zh_TW
LC_COLLATE = zh_TW
LC_CTYPE = zh_TW
LC_MESSAGES = zh_TW
LC_MONETARY = zh_TW
LC_NUMERIC = zh_TW
LC_TIME = zh_TW
PATH = /home/imacat/bin:/bin:/usr/bin:/opt/java/bin:/usr/local/bin
PERL5LIB = /tmp/perl-mod_perl2/5.8.8/.cpan/build/build/String-Similarity-1.03-dlexdd/blib/arch:/tmp/perl-mod_perl2/5.8.8/.cpan/build/build/String-Similarity-1.03-dlexdd/blib/lib:/tmp/perl-mod_perl2/5.8.8/.cpan/build/build/PApp-SQL-1.03-rQxcXQ/blib/arch:/tmp/perl-mod_perl2/5.8.8/.cpan/build/build/PApp-SQL-1.03-rQxcXQ/blib/lib:/tmp/perl-mod_perl2/5.8.8/.cpan/build/build/DBI-1.604-z1nDaD/blib/arch:/tmp/perl-mod_perl2/5.8.8/.cpan/build/build/DBI-1.604-z1nDaD/blib/lib:/tmp/perl-mod_perl2/5.8.8/.cpan/build/build/Crypt-Twofish2-1.01-pvolZV/blib/arch:/tmp/perl-mod_perl2/5.8.8/.cpan/build/build/Crypt-Twofish2-1.01-pvolZV/blib/lib:/tmp/perl-mod_perl2/5.8.8/.cpan/build/build/JSON-XS-2.2-0Cw3ul/blib/arch:/tmp/perl-mod_perl2/5.8.8/.cpan/build/build/JSON-XS-2.2-0Cw3ul/blib/lib:/tmp/perl-mod_perl2/5.8.8/.cpan/build/build/Compress-LZF-3.11-o5Yq4d/blib/arch:/tmp/perl-mod_perl2/5.8.8/.cpan/build/build/Compress-LZF-3.11-o5Yq4d/blib/lib:/tmp/perl-mod_perl2/5.8.8/.cpan/build/build/Digest-SHA!
1-2.11-EK30X5/blib/arch:/tmp/perl-mod_perl2/5.8.8/.cpan/build/build/Digest-SHA1-2.11-EK30X5/blib/lib:/tmp/perl-mod_perl2/5.8.8/.cpan/build/build/URI-1.36-gms634/blib/arch:/tmp/perl-mod_perl2/5.8.8/.cpan/build/build/URI-1.36-gms634/blib/lib:/home/imacat/lib/perl5
PERL5_CPANPLUS_IS_RUNNING = 18428
PERL5_CPAN_IS_RUNNING = 18428
PERL_CPAN_REPORTER_DIR = /home/imacat/.cpanreporter
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/zsh
TERM = xterm
TMPDIR = /tmp/perl-mod_perl2/5.8.8/.cpan/build/home/tmp
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /tmp/perl-mod_perl2/5.8.8/bin/perl
$UID/$EUID = 1000 / 1000
$GID = 100 1000 104 100 50 46 44 40 38 34 29 25 24 20 6 4 0
$EGID = 100 1000 104 100 50 46 44 40 38 34 29 25 24 20 6 4 0
Perl module toolchain versions installed:
Module Have
------------------- ------
CPAN 1.9205
Cwd 3.2701
ExtUtils::CBuilder n/a
ExtUtils::Command 1.14
ExtUtils::Install 1.50
ExtUtils::MakeMaker 6.44
ExtUtils::Manifest 1.51
ExtUtils::ParseXS n/a
File::Spec 3.2701
Module::Build n/a
Module::Signature 0.55
Test::Harness 3.10
Test::More 0.80
YAML 0.66
YAML::Syck n/a
version 0.74
--
Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
Platform:
osname=linux, osvers=2.6.22.10, archname=x86_64-linux-thread-multi-ld
uname='linux rinse 2.6.22.10 #1 smp tue nov 20 02:36:22 cst 2007 x86_64 gnulinux '
config_args='-d -Dprefix=/tmp/perl-mod_perl2/5.8.8 -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g -O3 -Dd_dosuid -Dinc_version_list=none -Acccdlflags=-fPIC -Duseshrplib=true -Dcf_email=imacat@mail.imacat.idv.tw'
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=define uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-g -O3',
cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include'
ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
alignbytes=16, prototype=define
Linker and Libraries:
ld='gcc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so
gnulibc_version='2.3.6'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/tmp/perl-mod_perl2/5.8.8/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE'
cccdlflags=' -fPIC', lddlflags='-shared -L/usr/local/lib'
Thread Next