develooper Front page | perl.cpan.testers | Postings from April 2008

PASS DBI-1.604 x86_64-linux-thread-multi-ld 2.6.22.10

From:
imacat
Date:
April 18, 2008 16:15
Subject:
PASS DBI-1.604 x86_64-linux-thread-multi-ld 2.6.22.10
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.

--
Dear Tim Bunce,
    
This is a computer-generated report for DBI-1.604
on perl 5.8.8, created by CPAN-Reporter-1.13. 

Thank you for uploading your work to CPAN.  Congratulations!
All tests were successful.

Sections of this report:

    * Tester comments
    * Program output
    * Prerequisites
    * Environment and other context

------------------------------
TESTER COMMENTS
------------------------------

Additional comments from tester: 

this report is from an automated smoke testing program
and was not reviewed by a human for accuracy

------------------------------
PROGRAM OUTPUT
------------------------------

Output from '/usr/bin/make test':

PERL_DL_NONLAZY=1 /tmp/perl-mod_perl2/5.8.8/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/01basics..................ok
t/02dbidrv..................ok
t/03handle..................ok
t/04mods....................ok
t/05thrclone................ok
t/06attrs...................ok
t/07kids....................ok
t/08keeperr.................ok
t/09trace...................ok
t/10examp...................ok
t/11fetch...................ok
t/12quote...................ok
t/13taint...................ok
t/14utf8....................ok
t/15array...................ok
t/19fhtrace.................ok
t/20meta....................ok
t/30subclass................ok
t/40profile.................ok
t/41prof_dump...............ok
t/42prof_data...............ok
t/43prof_env................ok
t/50dbm.....................ok
t/60preparse................ok
t/65transact................ok
t/70callbacks...............ok
t/72childhandles............ok
t/80proxy...................skipped: modules required for proxy are probably not installed (e.g., RPC/PlClient.pm)
t/85gofer...................ok
t/86gofer_fail..............ok
t/87gofer_cache.............ok
t/pod-coverage..............skipped: Test::Pod::Coverage 1.04 required for testing POD coverage
t/pod.......................skipped: Test::Pod 1.00 required for testing POD
t/zvg_01basics..............ok
t/zvg_02dbidrv..............ok
t/zvg_03handle..............ok
t/zvg_04mods................ok
t/zvg_05thrclone............ok
t/zvg_06attrs...............ok
t/zvg_07kids................ok
t/zvg_08keeperr.............ok
t/zvg_09trace...............ok
t/zvg_10examp...............ok
t/zvg_11fetch...............ok
t/zvg_12quote...............ok
t/zvg_13taint...............skipped: Taint attribute tests not functional with DBI_AUTOPROXY
t/zvg_14utf8................ok
t/zvg_15array...............ok
t/zvg_19fhtrace.............ok
t/zvg_20meta................ok
t/zvg_30subclass............ok
t/zvg_40profile.............ok
t/zvg_41prof_dump...........ok
t/zvg_42prof_data...........ok
t/zvg_43prof_env............ok
t/zvg_50dbm.................ok
t/zvg_60preparse............ok
t/zvg_65transact............skipped: Transactions not supported by DBD::Gofer
t/zvg_70callbacks...........ok
t/zvg_72childhandles........ok
t/zvg_80proxy...............skipped: modules required for proxy are probably not installed (e.g., RPC/PlClient.pm)
t/zvg_85gofer...............ok
t/zvg_86gofer_fail..........skipped: Gofer DBI_AUTOPROXY
t/zvg_87gofer_cache.........skipped: Gofer DBI_AUTOPROXY
t/zvp_01basics..............ok
t/zvp_02dbidrv..............ok
t/zvp_03handle..............ok
t/zvp_04mods................ok
t/zvp_05thrclone............ok
t/zvp_06attrs...............ok
t/zvp_07kids................skipped: $h->{Kids} attribute not supported for DBI::PurePerl
t/zvp_08keeperr.............ok
t/zvp_09trace...............ok
t/zvp_10examp...............ok
t/zvp_11fetch...............ok
t/zvp_12quote...............ok
t/zvp_13taint...............skipped: Taint attributes not supported with DBI::PurePerl
t/zvp_14utf8................ok
t/zvp_15array...............ok
t/zvp_19fhtrace.............ok
t/zvp_20meta................ok
t/zvp_30subclass............ok
t/zvp_40profile.............skipped: profiling not supported for DBI::PurePerl
t/zvp_41prof_dump...........skipped: profiling not supported for DBI::PurePerl
t/zvp_42prof_data...........skipped: profiling not supported for DBI::PurePerl
t/zvp_43prof_env............skipped: profiling not supported for DBI::PurePerl
t/zvp_50dbm.................ok
t/zvp_60preparse............skipped: preparse not supported for DBI::PurePerl
t/zvp_65transact............ok
t/zvp_70callbacks...........skipped: $h->{Callbacks} attribute not supported for DBI::PurePerl
t/zvp_72childhandles........ok
t/zvp_80proxy...............skipped: modules required for proxy are probably not installed (e.g., RPC/PlClient.pm)
t/zvp_85gofer...............ok
t/zvp_86gofer_fail..........skipped: requires Callbacks which are not supported with PurePerl
t/zvp_87gofer_cache.........ok
t/zvxgp_01basics............ok
t/zvxgp_02dbidrv............ok
t/zvxgp_03handle............ok
t/zvxgp_04mods..............ok
t/zvxgp_05thrclone..........ok
t/zvxgp_06attrs.............ok
t/zvxgp_07kids..............skipped: $h->{Kids} attribute not supported for DBI::PurePerl
t/zvxgp_08keeperr...........ok
t/zvxgp_09trace.............ok
t/zvxgp_10examp.............ok
t/zvxgp_11fetch.............ok
t/zvxgp_12quote.............ok
t/zvxgp_13taint.............skipped: Taint attributes not supported with DBI::PurePerl
t/zvxgp_14utf8..............ok
t/zvxgp_15array.............ok
t/zvxgp_19fhtrace...........ok
t/zvxgp_20meta..............ok
t/zvxgp_30subclass..........ok
t/zvxgp_40profile...........skipped: profiling not supported for DBI::PurePerl
t/zvxgp_41prof_dump.........skipped: profiling not supported for DBI::PurePerl
t/zvxgp_42prof_data.........skipped: profiling not supported for DBI::PurePerl
t/zvxgp_43prof_env..........skipped: profiling not supported for DBI::PurePerl
t/zvxgp_50dbm...............ok
t/zvxgp_60preparse..........skipped: preparse not supported for DBI::PurePerl
t/zvxgp_65transact..........skipped: Transactions not supported by DBD::Gofer
t/zvxgp_70callbacks.........skipped: $h->{Callbacks} attribute not supported for DBI::PurePerl
t/zvxgp_72childhandles......ok
t/zvxgp_80proxy.............skipped: modules required for proxy are probably not installed (e.g., RPC/PlClient.pm)
t/zvxgp_85gofer.............ok
t/zvxgp_86gofer_fail........skipped: requires Callbacks which are not supported with PurePerl
t/zvxgp_87gofer_cache.......skipped: Gofer DBI_AUTOPROXY
All tests successful.
Files=126, Tests=5805, 65 wallclock secs ( 1.70 usr  0.27 sys + 54.84 cusr  6.41 csys = 63.22 CPU)
Result: PASS
PERL_DL_NONLAZY=1 /tmp/perl-mod_perl2/5.8.8/bin/perl "-Iblib/lib" "-Iblib/arch" test.pl
test.pl 
DBI test application $Revision: 9451 $
Switch: DBI 1.604 by Tim Bunce, 1.604
Available Drivers: DBM, ExampleP, File, Gofer, Proxy, Sponge
dbi:ExampleP:: testing 3 sets of 20 connections:
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 
Disconnecting...
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 
Disconnecting...
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 
Disconnecting...
connect 20 and disconnect them, 3 times: 0.0083s / 60 = 0.0001s
Testing handle creation speed...
27777 NullP sth/s perl 5.008008 x86_64-linux-thread-multi-ld (gcc 4.1.2 -g -O3) 0.000036s

test.pl done

------------------------------
PREREQUISITES
------------------------------

Prerequisite modules loaded:

requires:

    Module       Need Have  
    ------------ ---- ------
    File::Spec   0    3.2701
    Scalar::Util 0    1.19  
    Storable     1    2.18  
    Test::Simple 0.4  0.80  

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    LANG = zh_TW
    LANGUAGE = zh_TW
    LC_ALL = zh_TW
    LC_COLLATE = zh_TW
    LC_CTYPE = zh_TW
    LC_MESSAGES = zh_TW
    LC_MONETARY = zh_TW
    LC_NUMERIC = zh_TW
    LC_TIME = zh_TW
    PATH = /home/imacat/bin:/bin:/usr/bin:/opt/java/bin:/usr/local/bin
    PERL5LIB = /tmp/perl-mod_perl2/5.8.8/.cpan/build/build/Digest-SHA1-2.11-0izlqS/blib/arch:/tmp/perl-mod_perl2/5.8.8/.cpan/build/build/Digest-SHA1-2.11-0izlqS/blib/lib:/tmp/perl-mod_perl2/5.8.8/.cpan/build/build/Date-Calc-5.4-o43zRw/blib/arch:/tmp/perl-mod_perl2/5.8.8/.cpan/build/build/Date-Calc-5.4-o43zRw/blib/lib:/tmp/perl-mod_perl2/5.8.8/.cpan/build/build/Bit-Vector-6.4-jIlnCi/blib/arch:/tmp/perl-mod_perl2/5.8.8/.cpan/build/build/Bit-Vector-6.4-jIlnCi/blib/lib:/tmp/perl-mod_perl2/5.8.8/.cpan/build/build/Carp-Clan-6.00-TPMzSh/blib/arch:/tmp/perl-mod_perl2/5.8.8/.cpan/build/build/Carp-Clan-6.00-TPMzSh/blib/lib:/tmp/perl-mod_perl2/5.8.8/.cpan/build/build/Test-Exception-0.27-xnB0_B/blib/arch:/tmp/perl-mod_perl2/5.8.8/.cpan/build/build/Test-Exception-0.27-xnB0_B/blib/lib:/tmp/perl-mod_perl2/5.8.8/.cpan/build/build/Sub-Uplevel-0.1901-9yOI6H/blib/arch:/tmp/perl-mod_perl2/5.8.8/.cpan/build/build/Sub-Uplevel-0.1901-9yOI6H/blib/lib:/tmp/perl-mod_perl2/5.8.8/.cpan/build/build/Apac!
 he-AuthCookie-3.12-re1A6N/blib/arch:/tmp/perl-mod_perl2/5.8.8/.cpan/build/build/Apache-AuthCookie-3.12-re1A6N/blib/lib:/home/imacat/lib/perl5
    PERL5_CPANPLUS_IS_RUNNING = 17159
    PERL5_CPAN_IS_RUNNING = 17159
    PERL_CPAN_REPORTER_DIR = /home/imacat/.cpanreporter
    PERL_MM_USE_DEFAULT = 1
    SHELL = /bin/zsh
    TERM = xterm
    TMPDIR = /tmp/perl-mod_perl2/5.8.8/.cpan/build/home/tmp

Perl special variables (and OS-specific diagnostics, for MSWin32):

    $^X = /tmp/perl-mod_perl2/5.8.8/bin/perl
    $UID/$EUID = 1000 / 1000
    $GID = 100 1000 104 100 50 46 44 40 38 34 29 25 24 20 6 4 0
    $EGID = 100 1000 104 100 50 46 44 40 38 34 29 25 24 20 6 4 0

Perl module toolchain versions installed:

    Module              Have  
    ------------------- ------
    CPAN                1.9205
    Cwd                 3.2701
    ExtUtils::CBuilder  n/a   
    ExtUtils::Command   1.14  
    ExtUtils::Install   1.50  
    ExtUtils::MakeMaker 6.44  
    ExtUtils::Manifest  1.51  
    ExtUtils::ParseXS   n/a   
    File::Spec          3.2701
    Module::Build       n/a   
    Module::Signature   0.55  
    Test::Harness       3.10  
    Test::More          0.80  
    YAML                0.66  
    YAML::Syck          n/a   
    version             0.74  


--

Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
  Platform:
    osname=linux, osvers=2.6.22.10, archname=x86_64-linux-thread-multi-ld
    uname='linux rinse 2.6.22.10 #1 smp tue nov 20 02:36:22 cst 2007 x86_64 gnulinux '
    config_args='-d -Dprefix=/tmp/perl-mod_perl2/5.8.8 -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g -O3 -Dd_dosuid -Dinc_version_list=none -Acccdlflags=-fPIC -Duseshrplib=true -Dcf_email=imacat@mail.imacat.idv.tw'
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=define use64bitall=define uselongdouble=define
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
    optimize='-g -O3',
    cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include'
    ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers=''
    intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
    ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
    alignbytes=16, prototype=define
  Linker and Libraries:
    ld='gcc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib
    libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
    perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
    libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so
    gnulibc_version='2.3.6'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/tmp/perl-mod_perl2/5.8.8/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE'
    cccdlflags=' -fPIC', lddlflags='-shared -L/usr/local/lib'



Comments to Ask Bjørn Hansen at ask@perl.org | Group listing | About