PASS Apache2-AutoIndex-XSLT-0.04 x86_64-linux-thread-multi-ld 2.6.22.10

This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.

--
Dear Nicola Worthington,
    
This is a computer-generated report for Apache2-AutoIndex-XSLT-0.04
on perl 5.10.0, created by CPAN-Reporter-1.13. 

Thank you for uploading your work to CPAN.  Congratulations!
All tests were successful.

Sections of this report:

    * Tester comments
    * Program output
    * Prerequisites
    * Environment and other context

------------------------------
TESTER COMMENTS
------------------------------

Additional comments from tester: 

this report is from an automated smoke testing program
and was not reviewed by a human for accuracy

------------------------------
PROGRAM OUTPUT
------------------------------

Output from './Build test':

/tmp/perl-mod_perl2/5.10.0/bin/perl -I /tmp/perl-mod_perl2/5.10.0/.cpan/build/build/Apache2-AutoIndex-XSLT-0.04-qsZLCt/blib/lib -I /tmp/perl-mod_perl2/5.10.0/.cpan/build/build/Apache2-AutoIndex-XSLT-0.04-qsZLCt/blib/arch t/TEST -clean
[warning] setting ulimit to allow core files
ulimit -c unlimited; /tmp/perl-mod_perl2/5.10.0/bin/perl /tmp/perl-mod_perl2/5.10.0/.cpan/build/build/Apache2-AutoIndex-XSLT-0.04-qsZLCt/t/TEST -clean
[  error] port 8529 is in use, cannot determine server pid to shutdown
/tmp/perl-mod_perl2/5.10.0/bin/perl -I /tmp/perl-mod_perl2/5.10.0/.cpan/build/build/Apache2-AutoIndex-XSLT-0.04-qsZLCt/blib/lib -I /tmp/perl-mod_perl2/5.10.0/.cpan/build/build/Apache2-AutoIndex-XSLT-0.04-qsZLCt/blib/arch t/TEST -bugreport -verbose=0
[warning] setting ulimit to allow core files
ulimit -c unlimited; /tmp/perl-mod_perl2/5.10.0/bin/perl /tmp/perl-mod_perl2/5.10.0/.cpan/build/build/Apache2-AutoIndex-XSLT-0.04-qsZLCt/t/TEST -bugreport -verbose=0
[  error] STDIN is not attached to tty, skip interactive config
[  error] Skipping the test suite execution, while returning success status


Running the test suite is important to make sure that the module that
you are about to install works on your system. If you choose not to
run the test suite and you have a problem using this module, make sure
to return and run this test suite before reporting any problems to the
developers of this module.


------------------------------
PREREQUISITES
------------------------------

Prerequisite modules loaded:

requires:

    Module               Need Have    
    -------------------- ---- --------
    Apache2::Access      0    2.000004
    Apache2::CmdParms    0    2.000004
    Apache2::Const       0    2.000004
    Apache2::Log         0    2.000004
    Apache2::Module      0    2.000004
    Apache2::RequestRec  0    2.000004
    Apache2::RequestUtil 0    2.000004
    Apache2::ServerRec   0    2.000004
    Apache2::ServerUtil  0    2.000004
    Apache2::URI         0    2.000004
    Apache2::Util        0    2.000004
    Fcntl                0    1.06    
    File::Spec           0    3.2701  
    URI::Escape          0    3.29    
    XML::Quote           0    1.02    
build_requires:

    Module               Need Have    
    -------------------- ---- --------
    Apache::Test         0    1.31    
    Apache::TestRequest  0    0       
    Apache::TestUtil     0    0.02    
    Test                 0    1.25    
    Test::More           0    0.80    
    Test::Pod            0    1.26    
    Test::Pod::Coverage  0    1.08    
    XML::Validate        0    1.025   

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    LANG = zh_TW
    LANGUAGE = zh_TW
    LC_ALL = zh_TW
    LC_COLLATE = zh_TW
    LC_CTYPE = zh_TW
    LC_MESSAGES = zh_TW
    LC_MONETARY = zh_TW
    LC_NUMERIC = zh_TW
    LC_TIME = zh_TW
    PATH = /home/imacat/bin:/bin:/usr/bin:/opt/java/bin:/usr/local/bin
    PERL5LIB = /tmp/perl-mod_perl2/5.10.0/.cpan/build/build/XML-Validate-1.025-ptjMpt/blib/arch:/tmp/perl-mod_perl2/5.10.0/.cpan/build/build/XML-Validate-1.025-ptjMpt/blib/lib:/tmp/perl-mod_perl2/5.10.0/.cpan/build/build/Test-Assertions-1.054-c1apB3/blib/arch:/tmp/perl-mod_perl2/5.10.0/.cpan/build/build/Test-Assertions-1.054-c1apB3/blib/lib:/tmp/perl-mod_perl2/5.10.0/.cpan/build/build/Log-Trace-1.070-9WWfIL/blib/arch:/tmp/perl-mod_perl2/5.10.0/.cpan/build/build/Log-Trace-1.070-9WWfIL/blib/lib:/tmp/perl-mod_perl2/5.10.0/.cpan/build/build/Test-Pod-Coverage-1.08-ietzLn/blib/arch:/tmp/perl-mod_perl2/5.10.0/.cpan/build/build/Test-Pod-Coverage-1.08-ietzLn/blib/lib:/tmp/perl-mod_perl2/5.10.0/.cpan/build/build/Pod-Coverage-0.19-bOChQ4/blib/arch:/tmp/perl-mod_perl2/5.10.0/.cpan/build/build/Pod-Coverage-0.19-bOChQ4/blib/lib:/tmp/perl-mod_perl2/5.10.0/.cpan/build/build/Devel-Symdump-2.08-NUcQ1c/blib/arch:/tmp/perl-mod_perl2/5.10.0/.cpan/build/build/Devel-Symdump-2.08-NUcQ1c/blib/lib:/t!
 mp/perl-mod_perl2/5.10.0/.cpan/build/build/XML-Quote-1.02-pWb6yZ/blib/arch:/tmp/perl-mod_perl2/5.10.0/.cpan/build/build/XML-Quote-1.02-pWb6yZ/blib/lib:/tmp/perl-mod_perl2/5.10.0/.cpan/build/build/Test-Pod-1.26-0bOeLl/blib/arch:/tmp/perl-mod_perl2/5.10.0/.cpan/build/build/Test-Pod-1.26-0bOeLl/blib/lib:/tmp/perl-mod_perl2/5.10.0/.cpan/build/build/URI-1.36-E45KlQ/blib/arch:/tmp/perl-mod_perl2/5.10.0/.cpan/build/build/URI-1.36-E45KlQ/blib/lib:/home/imacat/lib/perl5
    PERL5_CPANPLUS_IS_RUNNING = 2245
    PERL5_CPAN_IS_RUNNING = 2245
    PERL_CPAN_REPORTER_DIR = /home/imacat/.cpanreporter
    PERL_MM_USE_DEFAULT = 1
    SHELL = /bin/zsh
    TERM = xterm
    TMPDIR = /tmp/perl-mod_perl2/5.10.0/.cpan/build/home/tmp

Perl special variables (and OS-specific diagnostics, for MSWin32):

    $^X = /tmp/perl-mod_perl2/5.10.0/bin/perl
    $UID/$EUID = 1000 / 1000
    $GID = 100 0 4 6 20 24 25 29 34 38 40 44 46 50 100 104 1000
    $EGID = 100 0 4 6 20 24 25 29 34 38 40 44 46 50 100 104 1000

Perl module toolchain versions installed:

    Module              Have     
    ------------------- ---------
    CPAN                1.9205   
    Cwd                 3.2701   
    ExtUtils::CBuilder  0.22     
    ExtUtils::Command   1.14     
    ExtUtils::Install   1.50     
    ExtUtils::MakeMaker 6.44     
    ExtUtils::Manifest  1.51_01  
    ExtUtils::ParseXS   2.19     
    File::Spec          3.2701   
    Module::Build       0.2808_01
    Module::Signature   0.55     
    Test::Harness       3.10     
    Test::More          0.80     
    YAML                0.66     
    YAML::Syck          n/a      
    version             0.74     


--

Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
  Platform:
    osname=linux, osvers=2.6.22.10, archname=x86_64-linux-thread-multi-ld
    uname='linux rinse 2.6.22.10 #1 smp tue nov 20 02:36:22 cst 2007 x86_64 gnulinux '
    config_args='-d -Dprefix=/tmp/perl-mod_perl2/5.10.0 -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g -O3 -Dd_dosuid -Dinc_version_list=none -Duseshrplib=true -Dcf_email=imacat@mail.imacat.idv.tw'
    hint=recommended, useposix=true, d_sigaction=define
    useithreads=define, usemultiplicity=define
    useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
    use64bitint=define, use64bitall=define, uselongdouble=define
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
    optimize='-g -O3',
    cppflags='-D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include'
    ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers=''
    intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
    ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
    alignbytes=16, prototype=define
  Linker and Libraries:
    ld='gcc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib /lib64 /usr/lib64
    libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
    perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
    libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so
    gnulibc_version='2.3.6'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/tmp/perl-mod_perl2/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld/CORE'
    cccdlflags='-fPIC', lddlflags='-shared -g -O3 -L/usr/local/lib'

• PASS Apache2-AutoIndex-XSLT-0.04 x86_64-linux-thread-multi-ld 2.6.22.10 by imacat