Front page | perl.cpan.testers |
Postings from April 2008
FAIL RPSL-Parser-0.39 darwin-thread-multi-64int-2level 8.10.0
Thread Previous
From:
chris
Date:
April 17, 2008 23:03
Subject:
FAIL RPSL-Parser-0.39 darwin-thread-multi-64int-2level 8.10.0
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear LMC,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Fri Apr 18 07:02:56 2008] Trying to get 'http://www.cpan.org/authors/id/L/LM/LMC/RPSL-Parser-0.39.tar.gz'
[MSG] [Fri Apr 18 07:03:05 2008] Trying to get 'http://www.cpan.org/authors/id/L/LM/LMC/CHECKSUMS'
[MSG] [Fri Apr 18 07:03:06 2008] Checksum matches for 'RPSL-Parser-0.39.tar.gz'
[MSG] [Fri Apr 18 07:03:07 2008] Extracted 'RPSL-Parser-0.39/'
[MSG] [Fri Apr 18 07:03:07 2008] Extracted 'RPSL-Parser-0.39/MANIFEST'
[MSG] [Fri Apr 18 07:03:07 2008] Extracted 'RPSL-Parser-0.39/META.yml'
[MSG] [Fri Apr 18 07:03:07 2008] Extracted 'RPSL-Parser-0.39/Changes'
[MSG] [Fri Apr 18 07:03:07 2008] Extracted 'RPSL-Parser-0.39/t/'
[MSG] [Fri Apr 18 07:03:07 2008] Extracted 'RPSL-Parser-0.39/t/pod.t'
[MSG] [Fri Apr 18 07:03:07 2008] Extracted 'RPSL-Parser-0.39/t/person.t'
[MSG] [Fri Apr 18 07:03:07 2008] Extracted 'RPSL-Parser-0.39/t/RPSL-Parser.t'
[MSG] [Fri Apr 18 07:03:07 2008] Extracted 'RPSL-Parser-0.39/lib/'
[MSG] [Fri Apr 18 07:03:07 2008] Extracted 'RPSL-Parser-0.39/lib/RPSL/'
[MSG] [Fri Apr 18 07:03:07 2008] Extracted 'RPSL-Parser-0.39/lib/RPSL/Parser.pm'
[MSG] [Fri Apr 18 07:03:07 2008] Extracted 'RPSL-Parser-0.39/README'
[MSG] [Fri Apr 18 07:03:07 2008] Extracted 'RPSL-Parser-0.39/Build.PL'
[MSG] [Fri Apr 18 07:03:07 2008] Extracted 'RPSL-Parser-0.39/Makefile.PL'
[MSG] [Fri Apr 18 07:03:07 2008] Extracted 'RPSL::Parser' to '/Volumes/Media/smoke/perl5.10.0/.cpanplus/5.10.0/build/RPSL-Parser-0.39'
[MSG] [Fri Apr 18 07:03:10 2008] Checking if your kit is complete...
Looks good
Writing Makefile for RPSL::Parser
[MSG] [Fri Apr 18 07:03:10 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Fri Apr 18 07:03:16 2008] cp lib/RPSL/Parser.pm blib/lib/RPSL/Parser.pm
Manifying blib/man3/RPSL::Parser.3
[ERROR] [Fri Apr 18 07:03:18 2008] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /Volumes/Media/smoke/perl5.10.0/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/person...........ok
t/pod..............skipped: Test::Pod 1.00 required for testing POD
t/RPSL-Parser......Useless use of a constant in void context at t/RPSL-Parser.t line 10.
# Failed test 'test'
# at t/RPSL-Parser.t line 10.
# Looks like you planned 3 tests but ran 1 extra.
# Looks like you failed 1 test of 4 run.
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/3 subtests
Test Summary Report
-------------------
t/RPSL-Parser.t (Wstat: 256 Tests: 4 Failed: 2)
Failed tests: 3-4
Non-zero exit status: 1
Parse errors: Bad plan. You planned 3 tests but ran 4.
Files=3, Tests=5, 1 wallclock secs ( 0.09 usr 0.06 sys + 0.53 cusr 0.12 csys = 0.80 CPU)
Result: FAIL
Failed 1/3 test programs. 2/5 subtests failed.
make: *** [test_dynamic] Error 1
[MSG] [Fri Apr 18 07:03:18 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPAN::YACSmoke 0.0307. Powered by POE::Component::CPAN::YACSmoke.
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
PATH = /bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin
PERL5LIB = :/Volumes/Media/smoke/perl5.10.0/.cpanplus/5.10.0/build/RPSL-Parser-0.39/blib/lib:/Volumes/Media/smoke/perl5.10.0/.cpanplus/5.10.0/build/RPSL-Parser-0.39/blib/arch:/Volumes/Media/smoke/perl5.10.0/.cpanplus/5.10.0/build/RPSL-Parser-0.39/blib
PERL5_CPANPLUS_IS_RUNNING = 25886
PERL5_CPANPLUS_IS_VERSION = 0.84
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /Volumes/Media/smoke/perl5.10.0/bin/perl
UID: $< = 502
EUID: $> = 502
GID: $( = 502 502
EGID: $) = 502 502
-------------------------------
--
Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
Platform:
osname=darwin, osvers=8.10.0, archname=darwin-thread-multi-64int-2level
uname='darwin afalglas.bingosnet.co.uk 8.10.0 darwin kernel version 8.10.0: wed may 23 16:50:59 pdt 2007; root:xnu-792.21.3~1release_ppc power macintosh powerpc '
config_args='-e -Dprefix=/Volumes/Media/smoke/perl5.10.0 -Dusethreads -Duse64bitint -Dusemymalloc=n'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=undef, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fno-common -DPERL_DARWIN -no-cpp-precomp -fno-strict-aliasing -pipe -I/usr/local/include',
optimize='-O3',
cppflags='-no-cpp-precomp -fno-common -DPERL_DARWIN -no-cpp-precomp -fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='4.0.1 (Apple Computer, Inc. build 5367)', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=87654321
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='env MACOSX_DEPLOYMENT_TARGET=10.3 cc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib
libs=-ldbm -ldl -lm -lc
perllibs=-ldl -lm -lc
libc=/usr/lib/libc.dylib, so=dylib, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=bundle, d_dlsymun=undef, ccdlflags=' '
cccdlflags=' ', lddlflags=' -bundle -undefined dynamic_lookup -L/usr/local/lib'
Thread Previous