develooper Front page | perl.cpan.testers | Postings from April 2004

FAIL Schedule-TableImage-1.13 i386-linux-thread-multi 2.4.18-23mdksmp

From:
code
Date:
April 19, 2004 03:32
Subject:
FAIL Schedule-TableImage-1.13 i386-linux-thread-multi 2.4.18-23mdksmp

This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/.

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent duplicate effort.

--
[ insert comments here ]


PAN.pm: Going to build R/RA/RAHUNT/Schedule-TableImage-1.13.tar.gz
 
Checking if your kit is complete...
Looks good
Warning: prerequisite Text::Wrapper 1 not found.
Writing Makefile for Schedule::TableImage
---- Unsatisfied dependencies detected during [R/RA/RAHUNT/Schedule-TableImage-1.13.tar.gz] -----
    Text::Wrapper
Shall I follow them and prepend them to the queue
of modules we are processing right now? [yes]
Running make test
  Delayed until after prerequisites
Running make install
  Delayed until after prerequisites
Running install for module Text::Wrapper
Running make for C/CJ/CJM/Text-Wrapper-1.000.tar.gz
Fetching with LWP:
  ftp://cpan.etla.org/pub/CPAN/authors/id/C/CJ/CJM/Text-Wrapper-1.000.tar.gz
Fetching with LWP:
  ftp://cpan.etla.org/pub/CPAN/authors/id/C/CJ/CJM/CHECKSUMS
Checksum for /root/.cpan/sources/authors/id/C/CJ/CJM/Text-Wrapper-1.000.tar.gz ok
Text-Wrapper-1.000/
Text-Wrapper-1.000/Changes
Text-Wrapper-1.000/Makefile.PL
Text-Wrapper-1.000/MANIFEST
Text-Wrapper-1.000/README
Text-Wrapper-1.000/test.pl
Text-Wrapper-1.000/Wrapper.pm
 
  CPAN.pm: Going to build C/CJ/CJM/Text-Wrapper-1.000.tar.gz
 
Checking if your kit is complete...
Looks good
Writing Makefile for Text::Wrapper
cp Wrapper.pm blib/lib/Text/Wrapper.pm
Manifying blib/man3/Text::Wrapper.3pm
  /usr/bin/make  -- OK
Running make test
PERL_DL_NONLAZY=1 /usr/bin/perl5.8.1 "-Iblib/lib" "-Iblib/arch" test.pl
1..5
ok 1
ok 2
ok 3
ok 4
ok 5
  /usr/bin/make test -- OK
Running make install
Installing /usr/lib/perl5/site_perl/5.8.1/Text/Wrapper.pm
Installing /usr/share/man/man3/Text::Wrapper.3pm
Writing /usr/lib/perl5/site_perl/5.8.1/i386-linux-thread-multi/auto/Text/Wrapper/.packlist
Appending installation info to /usr/lib/perl5/5.8.1/i386-linux-thread-multi/perllocal.pod
  /usr/bin/make install  -- OK
Running make for R/RA/RAHUNT/Schedule-TableImage-1.13.tar.gz
  Is already unwrapped into directory /root/.cpan/build/Schedule-TableImage-1.13
 
  CPAN.pm: Going to build R/RA/RAHUNT/Schedule-TableImage-1.13.tar.gz
 
cp TableImage.pm blib/lib/Schedule/TableImage.pm
Manifying blib/man3/Schedule::TableImage.3pm
  /usr/bin/make  -- OK
Running make test
PERL_DL_NONLAZY=1 /usr/bin/perl5.8.1 "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/function_calls....ok 1/6Error finding text size
 Could not create image to read text size: Exception 405: Unable to get type metrics (12:00 PM)
# Looks like you planned 6 tests but only ran 1.
# Looks like your test died just after 1.
t/function_calls....dubious
        Test returned status 255 (wstat 65280, 0xff00)
Scalar found where operator expected at (eval 153) line 1, near "'int'  $__val"
        (Missing operator before   $__val?)
DIED. FAILED tests 2-6
        Failed 5/6 tests, 16.67% okay
Failed Test        Stat Wstat Total Fail  Failed  List of Failed
------------------------------------------------------------------------------------------------------------------------------------------------------------
t/function_calls.t  255 65280     6   10 166.67%  2-6
Failed 1/1 test scripts, 0.00% okay. 5/6 subtests failed, 16.67% okay.
make: *** [test_dynamic] Error 2
  /usr/bin/make test -- NOT OK
Running make install
  make test had returned bad status, won't install without force
 
cpan> exit
Lockfile removed.
[root@appzilla perl]# cpan
 
cpan shell -- CPAN exploration and modules installation (v1.76)
ReadLine support enabled
 
cpan> install Schedule::TableImage
CPAN: Storable loaded ok
Going to read /root/.cpan/Metadata
  Database was generated on Mon, 19 Apr 2004 00:52:08 GMT
Running install for module Schedule::TableImage
Running make for R/RA/RAHUNT/Schedule-TableImage-1.13.tar.gz
CPAN: Digest::MD5 loaded ok
CPAN: Compress::Zlib loaded ok
Checksum for /root/.cpan/sources/authors/id/R/RA/RAHUNT/Schedule-TableImage-1.13.tar.gz ok
Scanning cache /root/.cpan/build for sizes
Schedule-TableImage-1.13/
Schedule-TableImage-1.13/Makefile.PL
Schedule-TableImage-1.13/t/
Schedule-TableImage-1.13/t/function_calls.t
Schedule-TableImage-1.13/Changes
Schedule-TableImage-1.13/demo/
Schedule-TableImage-1.13/demo/demo.pl
Schedule-TableImage-1.13/demo/demo.png
Schedule-TableImage-1.13/TableImage.pm
Schedule-TableImage-1.13/README
Schedule-TableImage-1.13/MANIFEST
Removing previously used /root/.cpan/build/Schedule-TableImage-1.13
 
  CPAN.pm: Going to build R/RA/RAHUNT/Schedule-TableImage-1.13.tar.gz
 
Checking if your kit is complete...
Looks good
Writing Makefile for Schedule::TableImage
cp TableImage.pm blib/lib/Schedule/TableImage.pm
Manifying blib/man3/Schedule::TableImage.3pm
  /usr/bin/make  -- OK
Running make test
PERL_DL_NONLAZY=1 /usr/bin/perl5.8.1 "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/function_calls....ok 1/6Error finding text size
 Could not create image to read text size: Exception 405: Unable to get type metrics (12:00 PM)
# Looks like you planned 6 tests but only ran 1.
# Looks like your test died just after 1.
t/function_calls....dubious
        Test returned status 255 (wstat 65280, 0xff00)
Scalar found where operator expected at (eval 153) line 1, near "'int'  $__val"
        (Missing operator before   $__val?)
DIED. FAILED tests 2-6
        Failed 5/6 tests, 16.67% okay
Failed Test        Stat Wstat Total Fail  Failed  List of Failed
------------------------------------------------------------------------------------------------------------------------------------------------------------
t/function_calls.t  255 65280     6   10 166.67%  2-6
Failed 1/1 test scripts, 0.00% okay. 5/6 subtests failed, 16.67% okay.
make: *** [test_dynamic] Error 2
  /usr/bin/make test -- NOT OK
Running make install
 

Summary of my perl5 (revision 5.0 version 8 subversion 1) configuration:
  Platform:
    osname=linux, osvers=2.4.18-23mdksmp, archname=i386-linux-thread-multi
    uname='linux hp6.mandrakesoft.com 2.4.18-23mdksmp #1 smp fri aug 2 12:31:40 cest 2002 i686 unknown unknown gnulinux '
    config_args='-des -Dinc_version_list=5.8.0/i386-linux-thread-multi 5.8.0 5.6.1 5.6.0 -Darchname=i386-linux -Dcc=gcc -Doptimize=-O2 -fomit-frame-pointer -pipe -march=i586 -mcpu=pentiumpro  -Dprefix=/usr -Dvendorprefix=/usr -Dsiteprefix=/usr -Dman3ext=3pm -Dcf_by=MandrakeSoft -Dmyhostname=localhost -Dperladmin=root@localhost -Dd_dosuid -Ud_csh -Duseshrplib -Dusethreads'
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=undef use64bitall=undef uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm',
    optimize='-O2 -fomit-frame-pointer -pipe -march=i586 -mcpu=pentiumpro ',
    cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -I/usr/local/include -I/usr/include/gdbm'
    ccversion='', gccversion='3.3.1 (Mandrake Linux 9.2 3.3.1-1mdk)', gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
    ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=4, prototype=define
  Linker and Libraries:
    ld='gcc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib
    libs=-lnsl -lndbm -lgdbm -ldl -lm -lcrypt -lutil -lpthread -lc
    perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
    libc=/lib/libc-2.3.2.so, so=so, useshrplib=true, libperl=libperl.so
    gnulibc_version='2.3.2'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-rdynamic -Wl,-rpath,/usr/lib/perl5/5.8.1/i386-linux-thread-multi/CORE'
    cccdlflags='-fPIC', lddlflags='-shared -L/usr/local/lib'





Comments to Ask Bjørn Hansen at ask@perl.org | Group listing | About