Front page | perl.cpan.testers |
Postings from April 2008
PASS DOCSIS-ConfigFile-0.52 OpenBSD.i386-openbsd 4.2
Thread Previous
From:
bob walker
Date:
April 15, 2008 12:32
Subject:
PASS DOCSIS-ConfigFile-0.52 OpenBSD.i386-openbsd 4.2
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear Jan Henning Thorsen,
This is a computer-generated report for DOCSIS-ConfigFile-0.52
on perl-5.8.8, created automatically by CPAN-Reporter-1.0602
and sent to the CPAN Testers mailing list.
If you have received this email directly, it is because the person testing
your distribution chose to send a copy to your CPAN email address; there
may be a delay before the official report is received and processed
by CPAN Testers.
Thank you for uploading your work to CPAN. Congratulations!
All tests were successful.
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
[none provided]
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
PERL_DL_NONLAZY=1 /home/bob/cpantesting/perl-5.8.8/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00-load...............Can't locate Log/Log4perl.pm in @INC (@INC contains: /home/bob/cpantesting/perl-5.8.8/.cpan/build/DOCSIS-ConfigFile-bDQQEN/blib/lib /home/bob/cpantesting/perl-5.8.8/.cpan/build/DOCSIS-ConfigFile-bDQQEN/blib/arch /home/bob/cpantesting/perl-5.8.8/.cpan/build/DOCSIS-ConfigFile-bDQQEN/blib/lib /home/bob/cpantesting/perl-5.8.8/.cpan/build/DOCSIS-ConfigFile-bDQQEN/blib/arch /home/bob/cpantesting/perl-5.8.8/lib/5.8.8/OpenBSD.i386-openbsd /home/bob/cpantesting/perl-5.8.8/lib/5.8.8 /home/bob/cpantesting/perl-5.8.8/lib/site_perl/5.8.8/OpenBSD.i386-openbsd /home/bob/cpantesting/perl-5.8.8/lib/site_perl/5.8.8 /home/bob/cpantesting/perl-5.8.8/lib/site_perl) at /home/bob/cpantesting/perl-5.8.8/.cpan/build/DOCSIS-ConfigFile-bDQQEN/blib/lib/DOCSIS/ConfigFile/Logger.pm line 18.
# Testing DOCSIS::ConfigFile 0.52, Perl 5.008008, /home/bob/cpantesting/perl-5.8.8/bin/perl
ok
t/10-encode_decode......Can't locate Log/Log4perl.pm in @INC (@INC contains: /home/bob/cpantesting/perl-5.8.8/.cpan/build/DOCSIS-ConfigFile-bDQQEN/blib/lib /home/bob/cpantesting/perl-5.8.8/.cpan/build/DOCSIS-ConfigFile-bDQQEN/blib/arch /home/bob/cpantesting/perl-5.8.8/lib/5.8.8/OpenBSD.i386-openbsd /home/bob/cpantesting/perl-5.8.8/lib/5.8.8 /home/bob/cpantesting/perl-5.8.8/lib/site_perl/5.8.8/OpenBSD.i386-openbsd /home/bob/cpantesting/perl-5.8.8/lib/site_perl/5.8.8 /home/bob/cpantesting/perl-5.8.8/lib/site_perl .) at /home/bob/cpantesting/perl-5.8.8/.cpan/build/DOCSIS-ConfigFile-bDQQEN/blib/lib/DOCSIS/ConfigFile/Logger.pm line 18.
trace: NetworkAccess 3|1|01
trace: GlobalPrivacyEnable 29|1|01
trace: MaxCPE 18|1|0a
trace: AuthTimeout 1|4|0000000a
trace: ReAuthTimeout 2|4|0000000a
trace: AuthGraceTime 3|4|00000258
trace: OperTimeout 4|4|00000001
trace: ReKeyTimeout 5|4|00000001
trace: TEKGraceTime 6|4|00000258
trace: AuthRejectTimeout 7|4|0000003c
trace: SAMapWaitTimeout 8|4|00000001
trace: SAMapMaxRetries 9|4|00000004
trace: Added nested data BaselinePrivacy/17 [54] 0x01040000000a02040000000a03040000025804040000000105040000000106040000025807040000003c080400000001090400000004
trace: DsServiceFlowRef 1|2|0001
trace: QosParamSetType 6|1|07
trace: Added nested data DsServiceFlow/25 [7] 0x01020001060107
trace: UsServiceFlowRef 1|2|0002
trace: QosParamSetType 6|1|07
trace: MaxConcatenatedBurst 14|2|0000
trace: Added nested data UsServiceFlow/24 [11] 0x010200020601070e020000
trace: MfgCVCData 32|111|00fd620bb324fb572b125078840666300d06092a8648801197310b30090603550406130255533139303706a3051197310b30090603550406130255533139303706a305203666c65205365727669636520496e7465726661636203593353051b00005040613025553311d301b060355
trace: VendorSpecific 43|14|08030011ee1e01ff1f0100200128
trace: ClassifierRef 1|1|02
trace: ServiceFlowRef 3|2|0002
trace: RulePriority 5|1|40
trace: IpProto 2|2|0011
trace: SrcPortStart 7|2|07d0
trace: SrcPortEnd 8|2|03e8
trace: Added nested data IpPacketClassifier/9 [12] 0x02020011070207d0080203e8
trace: Added nested data UsPacketClass/22 [24] 0x01010203020002050140090c02020011070207d0080203e8
trace: SnmpMibObject 11|30|301c060e2b060104018b154d010601010602040a666f6f2d34322e62696e
trace: SnmpMibObject 11|24|3016060e2b060104018b154d010601010702400401060401
debug: Setting up CM config-file
debug: Could not read $code:
ok
t/boilerplate...........ok
t/pod-coverage..........skipped: Test::Pod::Coverage 1.04 required for testing POD coverage
t/pod...................skipped: Test::Pod 1.14 required for testing POD
All tests successful.
Files=5, Tests=17, 1 wallclock secs ( 0.02 usr 0.02 sys + 0.22 cusr 0.03 csys = 0.29 CPU)
Result: PASS
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
---------------- ---- -----
bytes 0 1.02
Digest::HMAC_MD5 1.0 1.01
Digest::MD5 2.3 2.36
! Getopt::Euclid 0.1 0.2.0
Math::BigInt 1.7 1.77
Socket 0 1.78
Test::More 0 0.74
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
PATH = /opt/SUNWspro/bin:/home/bob/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbin:/usr/games:.
PERL5LIB =
PERL5_CPANPLUS_IS_RUNNING = 6658
PERL5_CPAN_IS_RUNNING = 6658
PERL_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/local/bin/bash
TERM = xterm
TMPDIR = /home/bob/cpantesting/tmp/
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /home/bob/cpantesting/perl-5.8.8/bin/perl
$UID/$EUID = 1000 / 1000
$GID = 1000 0 1000
$EGID = 1000 0 1000
Perl module toolchain versions installed:
Module Have
------------------- ------
CPAN 1.9205
Cwd 3.2501
ExtUtils::CBuilder 0.21
ExtUtils::Command 1.13
ExtUtils::Install 1.44
ExtUtils::MakeMaker 6.42
ExtUtils::Manifest 1.51
ExtUtils::ParseXS n/a
File::Spec 3.2501
Module::Build 0.2808
Module::Signature n/a
Test::Harness 3.06
Test::More 0.74
YAML 0.66
YAML::Syck 1.00
version 0.74
--
Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
Platform:
osname=openbsd, osvers=4.2, archname=OpenBSD.i386-openbsd
uname='openbsd marge.purple 4.2 generic#375 i386 '
config_args='-Dprefix=/home/bob/cpantesting/perl-5.8.8 -des'
hint=recommended, useposix=true, d_sigaction=define
usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=undef use64bitall=undef uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fno-strict-aliasing -pipe -I/usr/local/include',
optimize='-O2',
cppflags='-fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='3.3.5 (propolice)', gccosandvers='openbsd4.2'
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags ='-Wl,-E -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib
libs=-lgdbm -lm -lutil -lc
perllibs=-lm -lutil -lc
libc=/usr/lib/libc.so.41.0, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-DPIC -fPIC ', lddlflags='-shared -fPIC -L/usr/local/lib'
Thread Previous