develooper Front page | perl.cpan.testers | Postings from April 2008

FAIL Apache2-AuthenNIS-0.15 x86_64-linux-thread-multi-ld 2.6.22.10

Thread Previous
From:
imacat
Date:
April 11, 2008 02:15
Subject:
FAIL Apache2-AuthenNIS-0.15 x86_64-linux-thread-multi-ld 2.6.22.10
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.

--

Dear ITEAHAUS,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Fri Apr 11 17:14:34 2008] Trying to get 'http://www.cpan.org/authors/id/I/IT/ITEAHAUS/CHECKSUMS'
[MSG] [Fri Apr 11 17:14:35 2008] Checksum matches for 'Apache2-AuthenNIS-0.15.tar.gz'
[MSG] [Fri Apr 11 17:14:35 2008] Extracted 'Apache2-AuthenNIS-0.15/'
[MSG] [Fri Apr 11 17:14:35 2008] Extracted 'Apache2-AuthenNIS-0.15/t/'
[MSG] [Fri Apr 11 17:14:35 2008] Extracted 'Apache2-AuthenNIS-0.15/t/boilerplate.t'
[MSG] [Fri Apr 11 17:14:35 2008] Extracted 'Apache2-AuthenNIS-0.15/t/pod-coverage.t'
[MSG] [Fri Apr 11 17:14:35 2008] Extracted 'Apache2-AuthenNIS-0.15/t/00-load.t'
[MSG] [Fri Apr 11 17:14:35 2008] Extracted 'Apache2-AuthenNIS-0.15/t/pod.t'
[MSG] [Fri Apr 11 17:14:35 2008] Extracted 'Apache2-AuthenNIS-0.15/META.yml'
[MSG] [Fri Apr 11 17:14:35 2008] Extracted 'Apache2-AuthenNIS-0.15/Changes'
[MSG] [Fri Apr 11 17:14:35 2008] Extracted 'Apache2-AuthenNIS-0.15/.cvsignore'
[MSG] [Fri Apr 11 17:14:35 2008] Extracted 'Apache2-AuthenNIS-0.15/MANIFEST'
[MSG] [Fri Apr 11 17:14:35 2008] Extracted 'Apache2-AuthenNIS-0.15/lib/'
[MSG] [Fri Apr 11 17:14:35 2008] Extracted 'Apache2-AuthenNIS-0.15/lib/Apache2/'
[MSG] [Fri Apr 11 17:14:35 2008] Extracted 'Apache2-AuthenNIS-0.15/lib/Apache2/AuthenNIS.pm'
[MSG] [Fri Apr 11 17:14:35 2008] Extracted 'Apache2-AuthenNIS-0.15/Makefile.PL'
[MSG] [Fri Apr 11 17:14:35 2008] Extracted 'Apache2-AuthenNIS-0.15/Build.PL'
[MSG] [Fri Apr 11 17:14:35 2008] Extracted 'Apache2-AuthenNIS-0.15/README'
[MSG] [Fri Apr 11 17:14:35 2008] Extracted 'Apache2::AuthenNIS' to '/opt/perl/testers/5.8.8/.cpanplus/5.8.8/build/Apache2-AuthenNIS-0.15'
[ERROR] [Fri Apr 11 17:14:35 2008] This module requires 'Module::Build' and 'CPANPLUS::Dist::Build' to be installed, but you don't have it! Will fall back to 'CPANPLUS::Dist::MM', but might not be able to install!
[MSG] [Fri Apr 11 17:14:35 2008] Checking if your kit is complete...
Looks good
Warning: prerequisite Net::NIS 0 not found.
Writing Makefile for Apache2::AuthenNIS

[MSG] [Fri Apr 11 17:14:35 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Fri Apr 11 17:14:35 2008] Module 'Apache2::AuthenNIS' requires 'Net::NIS' version '0' to be installed 
[MSG] [Fri Apr 11 17:14:35 2008] Trying to get 'http://www.cpan.org/authors/id/E/ES/ESM/CHECKSUMS'
[MSG] [Fri Apr 11 17:14:36 2008] Checksum matches for 'Net-NIS-0.43.tar.gz'
[MSG] [Fri Apr 11 17:14:36 2008] Extracted 'Net-NIS-0.43/'
[MSG] [Fri Apr 11 17:14:36 2008] Extracted 'Net-NIS-0.43/NIS/'
[MSG] [Fri Apr 11 17:14:36 2008] Extracted 'Net-NIS-0.43/NIS/Table.pm'
[MSG] [Fri Apr 11 17:14:36 2008] Extracted 'Net-NIS-0.43/t/'
[MSG] [Fri Apr 11 17:14:36 2008] Extracted 'Net-NIS-0.43/t/20wantarray.t'
[MSG] [Fri Apr 11 17:14:36 2008] Extracted 'Net-NIS-0.43/t/40ypmaster.t'
[MSG] [Fri Apr 11 17:14:36 2008] Extracted 'Net-NIS-0.43/t/10yperr_string.t'
[MSG] [Fri Apr 11 17:14:36 2008] Extracted 'Net-NIS-0.43/t/15yperr_num.t'
[MSG] [Fri Apr 11 17:14:36 2008] Extracted 'Net-NIS-0.43/t/90ypcat.t'
[MSG] [Fri Apr 11 17:14:36 2008] Extracted 'Net-NIS-0.43/t/01domainname.t'
[MSG] [Fri Apr 11 17:14:36 2008] Extracted 'Net-NIS-0.43/NIS.pm'
[MSG] [Fri Apr 11 17:14:36 2008] Extracted 'Net-NIS-0.43/MANIFEST'
[MSG] [Fri Apr 11 17:14:36 2008] Extracted 'Net-NIS-0.43/README'
[MSG] [Fri Apr 11 17:14:36 2008] Extracted 'Net-NIS-0.43/NIS.xs'
[MSG] [Fri Apr 11 17:14:36 2008] Extracted 'Net-NIS-0.43/Changes'
[MSG] [Fri Apr 11 17:14:36 2008] Extracted 'Net-NIS-0.43/Makefile.PL'
[MSG] [Fri Apr 11 17:14:36 2008] Extracted 'Net-NIS-0.43/NISTable.pod'
[MSG] [Fri Apr 11 17:14:36 2008] Extracted 'Net-NIS-0.43/NIS.pod'
[MSG] [Fri Apr 11 17:14:36 2008] Extracted 'Net-NIS-0.43/META.yml'
[MSG] [Fri Apr 11 17:14:36 2008] Extracted 'Net::NIS' to '/opt/perl/testers/5.8.8/.cpanplus/5.8.8/build/Net-NIS-0.43'
[MSG] [Fri Apr 11 17:14:37 2008] Checking if your kit is complete...
Looks good
Writing Makefile for Net::NIS

[MSG] [Fri Apr 11 17:14:37 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Fri Apr 11 17:14:39 2008] cp NISTable.pod blib/lib/Net/NISTable.pod
cp NIS.pod blib/lib/Net/NIS.pod
cp NIS/Table.pm blib/lib/Net/NIS/Table.pm
cp NIS.pm blib/lib/Net/NIS.pm
AutoSplitting blib/lib/Net/NIS.pm (blib/lib/auto/Net/NIS)
Please specify prototyping behavior for NIS.xs (see perlxs manual)
Running Mkbootstrap for Net::NIS ()
NIS.xs: In function 'XS_Net__NIS_yp_order':
NIS.xs:446: warning: passing argument 3 of 'yp_order' from incompatible pointer type
NIS.c: In function 'XS_Net__NIS_yperr_string':
NIS.c:599: warning: assignment discards qualifiers from pointer target type
Manifying blib/man3/Net::NIS.3
Manifying blib/man3/Net::NISTable.3

[MSG] [Fri Apr 11 17:14:40 2008] MAKE TEST passed: t/01domainname........ok
t/10yperr_string......ok
t/15yperr_num.........ok
t/20wantarray.........ok
t/40ypmaster..........Can't find master for map shadow.byname. Reason: ¦b¦øªA¾¹ªº»â°ì¸ê®Æ¤¤§ä¤£¨ì¦¹¤@¹ï¬Mªí
ok
t/90ypcat.............# This test is disabled by default. To run, set NET_NIS_YPCAT_TEST=1
ok
All tests successful.
Files=6, Tests=63,  0 wallclock secs ( 0.03 usr  0.01 sys +  0.21 cusr  0.04 csys =  0.29 CPU)
Result: PASS

[MSG] [Fri Apr 11 17:14:40 2008] Sending test report for 'Net-NIS-0.43'
[MSG] [Fri Apr 11 17:14:40 2008] Ok, not sending test report
[MSG] [Fri Apr 11 17:14:43 2008] cp lib/Apache2/AuthenNIS.pm blib/lib/Apache2/AuthenNIS.pm
Manifying blib/man3/Apache2::AuthenNIS.3

[ERROR] [Fri Apr 11 17:14:45 2008] MAKE TEST failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) t/00-load...........
#   Failed test 'use Apache2::AuthenNIS;'
#   at t/00-load.t line 6.
#     Tried to use 'Apache2::AuthenNIS'.
#     Error:  Can't locate mod_perl2.pm in @INC (@INC contains: /opt/perl/testers/5.8.8/.cpanplus/5.8.8/build/Apache2-AuthenNIS-0.15/blib/lib /opt/perl/testers/5.8.8/.cpanplus/5.8.8/build/Apache2-AuthenNIS-0.15/blib/arch /opt/perl/testers/5.8.8/.cpanplus/5.8.8/build/Apache2-AuthenNIS-0.15/blib/lib /opt/perl/testers/5.8.8/.cpanplus/5.8.8/build/Apache2-AuthenNIS-0.15/blib/arch /home/imacat/lib/perl5 /opt/perl/testers/5.8.8/.cpanplus/5.8.8/build/Net-NIS-0.43/blib/lib /opt/perl/testers/5.8.8/.cpanplus/5.8.8/build/Net-NIS-0.43/blib/arch /opt/perl/testers/5.8.8/.cpanplus/5.8.8/build/Net-NIS-0.43/blib /opt/perl/testers/5.8.8/.cpanplus/5.8.8/build/Net-NIS-0.43/blib/lib /opt/perl/testers/5.8.8/.cpanplus/5.8.8/build/Net-NIS-0.43/blib/arch /opt/perl/testers/5.8.8/.cpanplus/5.8.8/build/Net-NIS-0.43/blib /opt/perl/testers/5.8.8/.cpanplus/5.8.8/build/Apache2-AuthenNIS-0.15/blib/lib /opt/perl/testers/5.8.8/.cpanplus/5.8.8/build/Apache2-AuthenNIS-0.15/blib/arch /opt/perl/testers/5.8.8/.cpan!
 plus/5.8.8/build/Apache2-AuthenNIS-0.15/blib /opt/perl/testers/5.8.8/lib/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/5.8.8/lib/5.8.8 /opt/perl/testers/5.8.8/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/5.8.8/lib/site_perl/5.8.8 /opt/perl/testers/5.8.8/lib/site_perl) at /opt/perl/testers/5.8.8/.cpanplus/5.8.8/build/Apache2-AuthenNIS-0.15/blib/lib/Apache2/AuthenNIS.pm line 6.
# BEGIN failed--compilation aborted at /opt/perl/testers/5.8.8/.cpanplus/5.8.8/build/Apache2-AuthenNIS-0.15/blib/lib/Apache2/AuthenNIS.pm line 6.
# Compilation failed in require at (eval 2) line 2.
# BEGIN failed--compilation aborted at (eval 2) line 2.
Use of uninitialized value in concatenation (.) or string at t/00-load.t line 9.
# Testing Apache2::AuthenNIS , Perl 5.008008, /opt/perl/testers/5.8.8/bin/perl
# Looks like you failed 1 test of 1.
 Dubious, test returned 1 (wstat 256, 0x100)
 Failed 1/1 subtests 
t/boilerplate.......ok
t/pod-coverage......skipped: Test::Pod::Coverage 1.08 required for testing POD coverage
t/pod...............ok

Test Summary Report
-------------------
t/00-load.t     (Wstat: 256 Tests: 1 Failed: 1)
  Failed test:  1
  Non-zero exit status: 1
t/boilerplate.t (Wstat: 0 Tests: 3 Failed: 0)
  TODO passed:   1-3
Files=4, Tests=5,  0 wallclock secs ( 0.03 usr  0.01 sys +  0.17 cusr  0.03 csys =  0.24 CPU)
Result: FAIL
Failed 1/4 test programs. 1/5 subtests failed.
make: *** [test_dynamic] Error 255

[MSG] [Fri Apr 11 17:14:45 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'


MISSING PREREQUISITES:

It was observed that the test suite seem to fail without these modules:

mod_perl2

As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem.  For example:

WriteMakefile(
    AUTHOR      => 'ITEAHAUS (cpanplus-info@lists.sf.net)',
    ... # other information
    PREREQ_PM   => {
	'mod_perl2'	=> '0', # or a minimum working version
    }
);

If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be
worth a look.

Thanks! :-)

PREREQUISITES:

Here is a list of prerequisites you specified and versions we 
managed to load:
                                
	  Module Name                        Have     Want
	  Net::NIS                           0.43        0
	  Test::More                         0.78        0

******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.0307.

--

Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
  Platform:
    osname=linux, osvers=2.6.22.10, archname=x86_64-linux-thread-multi-ld
    uname='linux rinse 2.6.22.10 #1 smp tue nov 20 02:36:22 cst 2007 x86_64 gnulinux '
    config_args='-d -Dprefix=/opt/perl/testers/5.8.8 -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g -O3 -Dd_dosuid -Dinc_version_list=none -Acccdlflags=-fPIC -Duseshrplib=true -Dcf_email=imacat@mail.imacat.idv.tw'
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=define use64bitall=define uselongdouble=define
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
    optimize='-g -O3',
    cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include'
    ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers=''
    intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
    ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
    alignbytes=16, prototype=define
  Linker and Libraries:
    ld='gcc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib
    libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
    perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
    libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so
    gnulibc_version='2.3.6'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/opt/perl/testers/5.8.8/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE'
    cccdlflags=' -fPIC', lddlflags='-shared -L/usr/local/lib'

Thread Previous


Comments to Ask Bjørn Hansen at ask@perl.org | Group listing | About