FAIL Webalizer-Hist-0.02 x86_64-linux-thread-multi-ld 2.6.22.10

This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.

--

Dear YORHEL,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Tue Apr  8 07:01:49 2008] Trying to get 'http://www.cpan.org/authors/id/Y/YO/YORHEL/CHECKSUMS'
[MSG] [Tue Apr  8 07:01:50 2008] Checksum matches for 'Webalizer-Hist-0.02.tar.gz'
[MSG] [Tue Apr  8 07:01:50 2008] Extracted 'Webalizer-Hist-0.02/'
[MSG] [Tue Apr  8 07:01:50 2008] Extracted 'Webalizer-Hist-0.02/t/'
[MSG] [Tue Apr  8 07:01:50 2008] Extracted 'Webalizer-Hist-0.02/t/data/'
[MSG] [Tue Apr  8 07:01:50 2008] Extracted 'Webalizer-Hist-0.02/t/data/testfile.data'
[MSG] [Tue Apr  8 07:01:50 2008] Extracted 'Webalizer-Hist-0.02/t/91pod-coverage.t'
[MSG] [Tue Apr  8 07:01:50 2008] Extracted 'Webalizer-Hist-0.02/t/00basic.t'
[MSG] [Tue Apr  8 07:01:50 2008] Extracted 'Webalizer-Hist-0.02/t/90pod-test.t'
[MSG] [Tue Apr  8 07:01:50 2008] Extracted 'Webalizer-Hist-0.02/lib/'
[MSG] [Tue Apr  8 07:01:50 2008] Extracted 'Webalizer-Hist-0.02/lib/Webalizer/'
[MSG] [Tue Apr  8 07:01:50 2008] Extracted 'Webalizer-Hist-0.02/lib/Webalizer/Hist.pm'
[MSG] [Tue Apr  8 07:01:50 2008] Extracted 'Webalizer-Hist-0.02/README'
[MSG] [Tue Apr  8 07:01:50 2008] Extracted 'Webalizer-Hist-0.02/Changes'
[MSG] [Tue Apr  8 07:01:50 2008] Extracted 'Webalizer-Hist-0.02/Build.PL'
[MSG] [Tue Apr  8 07:01:50 2008] Extracted 'Webalizer-Hist-0.02/Makefile.PL'
[MSG] [Tue Apr  8 07:01:50 2008] Extracted 'Webalizer-Hist-0.02/META.yml'
[MSG] [Tue Apr  8 07:01:50 2008] Extracted 'Webalizer-Hist-0.02/MANIFEST'
[MSG] [Tue Apr  8 07:01:50 2008] Extracted 'Webalizer::Hist' to '/opt/perl/testers/5.8.8/.cpanplus/5.8.8/build/Webalizer-Hist-0.02'
[ERROR] [Tue Apr  8 07:01:50 2008] This module requires 'Module::Build' and 'CPANPLUS::Dist::Build' to be installed, but you don't have it! Will fall back to 'CPANPLUS::Dist::MM', but might not be able to install!
[MSG] [Tue Apr  8 07:01:50 2008] # running Build.PL 
/opt/perl/testers/5.8.8/bin/perl Build.PL
Checking whether your kit is complete...
Looks good

Checking prerequisites...
Looks good

Creating new 'Build' script for 'Webalizer-Hist' version '0.02'

[MSG] [Tue Apr  8 07:01:50 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Tue Apr  8 07:01:51 2008] Copying lib/Webalizer/Hist.pm -> blib/lib/Webalizer/Hist.pm
Manifying blib/lib/Webalizer/Hist.pm -> blib/libdoc/Webalizer::Hist.3

[ERROR] [Tue Apr  8 07:01:51 2008] MAKE TEST failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) t/00basic.............
#   Failed test 'use Data::Webalizer::Hist;'
#   at t/00basic.t line 3.
#     Tried to use 'Data::Webalizer::Hist'.
#     Error:  Can't locate Data/Webalizer/Hist.pm in @INC (@INC contains: /opt/perl/testers/5.8.8/.cpanplus/5.8.8/build/Webalizer-Hist-0.02/blib/lib /opt/perl/testers/5.8.8/.cpanplus/5.8.8/build/Webalizer-Hist-0.02/blib/arch _build/lib /home/imacat/lib/perl5 /opt/perl/testers/5.8.8/.cpanplus/5.8.8/build/Module-Build-0.2808/blib/lib /opt/perl/testers/5.8.8/.cpanplus/5.8.8/build/Module-Build-0.2808/blib/arch /opt/perl/testers/5.8.8/.cpanplus/5.8.8/build/Webalizer-Hist-0.02/blib/lib /opt/perl/testers/5.8.8/.cpanplus/5.8.8/build/Webalizer-Hist-0.02/blib/arch /opt/perl/testers/5.8.8/.cpanplus/5.8.8/build/Webalizer-Hist-0.02/blib /opt/perl/testers/5.8.8/lib/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/5.8.8/lib/5.8.8 /opt/perl/testers/5.8.8/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/5.8.8/lib/site_perl/5.8.8 /opt/perl/testers/5.8.8/lib/site_perl .) at (eval 2) line 2.
# BEGIN failed--compilation aborted at (eval 2) line 2.
Can't locate object method "new" via package "Data::Webalizer::Hist" (perhaps you forgot to load "Data::Webalizer::Hist"?) at t/00basic.t line 51.
# Looks like you planned 21 tests but only ran 1.
# Looks like you failed 1 test of 1 run.
# Looks like your test died just after 1.
 Dubious, test returned 255 (wstat 65280, 0xff00)
 Failed 21/21 subtests 
t/90pod-test..........ok
t/91pod-coverage......skipped: Test::Pod::Coverage 0.08 required for testing POD coverage

Test Summary Report
-------------------
t/00basic.t       (Wstat: 65280 Tests: 1 Failed: 1)
  Failed test:  1
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 21 tests but ran 1.
Files=3, Tests=2,  0 wallclock secs ( 0.00 usr  0.00 sys +  0.13 cusr  0.02 csys =  0.15 CPU)
Result: FAIL
Failed 1/3 test programs. 1/2 subtests failed.
make: *** [test] Error 255

[MSG] [Tue Apr  8 07:01:51 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'


MISSING PREREQUISITES:

It was observed that the test suite seem to fail without these modules:

Data::Webalizer::Hist

As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem.  For example:

WriteMakefile(
    AUTHOR      => 'YORHEL (cpanplus-info@lists.sf.net)',
    ... # other information
    PREREQ_PM   => {
	'Data::Webalizer::Hist'	=> '0', # or a minimum working version
    }
);

If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be
worth a look.

Thanks! :-)


******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.0307.

--

Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
  Platform:
    osname=linux, osvers=2.6.22.10, archname=x86_64-linux-thread-multi-ld
    uname='linux rinse 2.6.22.10 #1 smp tue nov 20 02:36:22 cst 2007 x86_64 gnulinux '
    config_args='-d -Dprefix=/opt/perl/testers/5.8.8 -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g -O3 -Dd_dosuid -Dinc_version_list=none -Acccdlflags=-fPIC -Duseshrplib=true -Dcf_email=imacat@mail.imacat.idv.tw'
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=define use64bitall=define uselongdouble=define
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
    optimize='-g -O3',
    cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include'
    ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers=''
    intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
    ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
    alignbytes=16, prototype=define
  Linker and Libraries:
    ld='gcc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib
    libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
    perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
    libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so
    gnulibc_version='2.3.6'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/opt/perl/testers/5.8.8/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE'
    cccdlflags=' -fPIC', lddlflags='-shared -L/usr/local/lib'

• FAIL Webalizer-Hist-0.02 x86_64-linux-thread-multi-ld 2.6.22.10 by imacat