Front page | perl.cpan.testers |
Postings from April 2008
FAIL Tie-StorableDir-0.075 x86_64-linux-thread-multi-ld 2.6.22.10
From:
imacat
Date:
April 6, 2008 14:40
Subject:
FAIL Tie-StorableDir-0.075 x86_64-linux-thread-multi-ld 2.6.22.10
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear BDONLAN,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Mon Apr 7 04:25:52 2008] Trying to get 'http://www.cpan.org/authors/id/B/BD/BDONLAN/CHECKSUMS'
[MSG] [Mon Apr 7 04:25:53 2008] Checksum matches for 'Tie-StorableDir-0.075.tar.gz'
[MSG] [Mon Apr 7 04:25:53 2008] Extracted 'Tie-StorableDir-0.075/'
[MSG] [Mon Apr 7 04:25:53 2008] Extracted 'Tie-StorableDir-0.075/t/'
[MSG] [Mon Apr 7 04:25:53 2008] Extracted 'Tie-StorableDir-0.075/t/02store.t'
[MSG] [Mon Apr 7 04:25:53 2008] Extracted 'Tie-StorableDir-0.075/t/04errors.t'
[MSG] [Mon Apr 7 04:25:53 2008] Extracted 'Tie-StorableDir-0.075/t/03backing.t'
[MSG] [Mon Apr 7 04:25:53 2008] Extracted 'Tie-StorableDir-0.075/t/01use.t'
[MSG] [Mon Apr 7 04:25:53 2008] Extracted 'Tie-StorableDir-0.075/lib/'
[MSG] [Mon Apr 7 04:25:53 2008] Extracted 'Tie-StorableDir-0.075/lib/Tie/'
[MSG] [Mon Apr 7 04:25:53 2008] Extracted 'Tie-StorableDir-0.075/lib/Tie/StorableDir.pm'
[MSG] [Mon Apr 7 04:25:53 2008] Extracted 'Tie-StorableDir-0.075/lib/Tie/StorableDir/'
[MSG] [Mon Apr 7 04:25:53 2008] Extracted 'Tie-StorableDir-0.075/lib/Tie/StorableDir/BackedArray.pm'
[MSG] [Mon Apr 7 04:25:53 2008] Extracted 'Tie-StorableDir-0.075/lib/Tie/StorableDir/BackedHash.pm'
[MSG] [Mon Apr 7 04:25:53 2008] Extracted 'Tie-StorableDir-0.075/lib/Tie/StorableDir/BackedScalar.pm'
[MSG] [Mon Apr 7 04:25:53 2008] Extracted 'Tie-StorableDir-0.075/lib/Tie/StorableDir/Slot.pm'
[MSG] [Mon Apr 7 04:25:53 2008] Extracted 'Tie-StorableDir-0.075/README'
[MSG] [Mon Apr 7 04:25:53 2008] Extracted 'Tie-StorableDir-0.075/Changes'
[MSG] [Mon Apr 7 04:25:53 2008] Extracted 'Tie-StorableDir-0.075/Build.PL'
[MSG] [Mon Apr 7 04:25:53 2008] Extracted 'Tie-StorableDir-0.075/Makefile.PL'
[MSG] [Mon Apr 7 04:25:53 2008] Extracted 'Tie-StorableDir-0.075/META.yml'
[MSG] [Mon Apr 7 04:25:53 2008] Extracted 'Tie-StorableDir-0.075/MANIFEST'
[MSG] [Mon Apr 7 04:25:53 2008] Extracted 'Tie::StorableDir' to '/opt/perl/testers/5.8.8/.cpanplus/5.8.8/build/Tie-StorableDir-0.075'
[ERROR] [Mon Apr 7 04:25:53 2008] This module requires 'Module::Build' and 'CPANPLUS::Dist::Build' to be installed, but you don't have it! Will fall back to 'CPANPLUS::Dist::MM', but might not be able to install!
[MSG] [Mon Apr 7 04:25:53 2008] # running Build.PL
/opt/perl/testers/5.8.8/bin/perl Build.PL
Checking whether your kit is complete...
Looks good
Checking prerequisites...
Looks good
Creating new 'Build' script for 'Tie-StorableDir' version '0.075'
[MSG] [Mon Apr 7 04:25:53 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Mon Apr 7 04:25:54 2008] Copying lib/Tie/StorableDir/BackedHash.pm -> blib/lib/Tie/StorableDir/BackedHash.pm
Copying lib/Tie/StorableDir/BackedScalar.pm -> blib/lib/Tie/StorableDir/BackedScalar.pm
Copying lib/Tie/StorableDir/BackedArray.pm -> blib/lib/Tie/StorableDir/BackedArray.pm
Copying lib/Tie/StorableDir.pm -> blib/lib/Tie/StorableDir.pm
Copying lib/Tie/StorableDir/Slot.pm -> blib/lib/Tie/StorableDir/Slot.pm
Manifying blib/lib/Tie/StorableDir.pm -> blib/libdoc/Tie::StorableDir.3
[ERROR] [Mon Apr 7 04:25:54 2008] MAKE TEST failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) t/01use..........ok
t/02store........Cannot read directory entry: ¿ù»~ªºÀÉ®×±Ôz¶µ at t/02store.t line 94
# Looks like you planned 11 tests but only ran 7.
# Looks like your test died just after 7.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 4/11 subtests
(less 1 skipped subtest: 6 okay)
t/03backing......ok
t/04errors.......Cannot read directory entry: ¿ù»~ªºÀÉ®×±Ôz¶µ at t/04errors.t line 98
# Looks like you planned 9 tests but only ran 4.
# Looks like your test died just after 4.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 5/9 subtests
Test Summary Report
-------------------
t/02store.t (Wstat: 65280 Tests: 7 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 11 tests but ran 7.
t/04errors.t (Wstat: 65280 Tests: 4 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 9 tests but ran 4.
Files=4, Tests=28, 0 wallclock secs ( 0.04 usr 0.00 sys + 0.32 cusr 0.04 csys = 0.40 CPU)
Result: FAIL
Failed 2/4 test programs. 0/28 subtests failed.
make: *** [test] Error 255
[MSG] [Mon Apr 7 04:25:54 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Carp 1.04 0
File::Spec 3.2701 0
File::Spec::Functions 3.2701 0
IO::Dir 1.06 0
Storable 2.18 0
Tie::Hash 1.02 0
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPAN::YACSmoke 0.0307.
--
Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
Platform:
osname=linux, osvers=2.6.22.10, archname=x86_64-linux-thread-multi-ld
uname='linux rinse 2.6.22.10 #1 smp tue nov 20 02:36:22 cst 2007 x86_64 gnulinux '
config_args='-d -Dprefix=/opt/perl/testers/5.8.8 -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g -O3 -Dd_dosuid -Dinc_version_list=none -Acccdlflags=-fPIC -Duseshrplib=true -Dcf_email=imacat@mail.imacat.idv.tw'
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=define uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-g -O3',
cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include'
ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
alignbytes=16, prototype=define
Linker and Libraries:
ld='gcc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so
gnulibc_version='2.3.6'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/opt/perl/testers/5.8.8/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE'
cccdlflags=' -fPIC', lddlflags='-shared -L/usr/local/lib'
-
FAIL Tie-StorableDir-0.075 x86_64-linux-thread-multi-ld 2.6.22.10
by imacat