FAIL Sys-Ptrace-0.05 x86_64-linux-thread-multi-ld 2.6.22.10

This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.

--

Dear BBB,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'fetch':

[MSG] [Mon Apr  7 01:40:32 2008] Trying to get 'http://www.cpan.org/authors/id/B/BB/BBB/CHECKSUMS'
[MSG] [Mon Apr  7 01:40:34 2008] Checksum matches for 'Sys-Ptrace-0.05.tar.gz'
[MSG] [Mon Apr  7 01:40:34 2008] Extracted 'Sys-Ptrace-0.05/'
[MSG] [Mon Apr  7 01:40:34 2008] Extracted 'Sys-Ptrace-0.05/t/'
[MSG] [Mon Apr  7 01:40:34 2008] Extracted 'Sys-Ptrace-0.05/t/100_load.t'
[MSG] [Mon Apr  7 01:40:34 2008] Extracted 'Sys-Ptrace-0.05/t/110_constants.t'
[MSG] [Mon Apr  7 01:40:34 2008] Extracted 'Sys-Ptrace-0.05/t/200_strace.t'
[MSG] [Mon Apr  7 01:40:34 2008] Extracted 'Sys-Ptrace-0.05/Ptrace.pm'
[MSG] [Mon Apr  7 01:40:34 2008] Extracted 'Sys-Ptrace-0.05/Makefile.PL'
[MSG] [Mon Apr  7 01:40:34 2008] Extracted 'Sys-Ptrace-0.05/README'
[MSG] [Mon Apr  7 01:40:34 2008] Extracted 'Sys-Ptrace-0.05/MANIFEST'
[MSG] [Mon Apr  7 01:40:34 2008] Extracted 'Sys-Ptrace-0.05/CHANGES'
[MSG] [Mon Apr  7 01:40:34 2008] Extracted 'Sys-Ptrace-0.05/Sys-Ptrace.spec'
[MSG] [Mon Apr  7 01:40:34 2008] Extracted 'Sys-Ptrace-0.05/Sys-Ptrace.spec.PL'
[MSG] [Mon Apr  7 01:40:34 2008] Extracted 'Sys-Ptrace-0.05/Ptrace.xs'
[MSG] [Mon Apr  7 01:40:34 2008] Extracted 'Sys::Ptrace' to '/opt/perl/testers/5.8.8/.cpanplus/5.8.8/build/Sys-Ptrace-0.05'
[MSG] [Mon Apr  7 01:40:35 2008] Checking if your kit is complete...
Looks good
Writing Makefile for Sys::Ptrace

[MSG] [Mon Apr  7 01:40:35 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[ERROR] [Mon Apr  7 01:40:36 2008] MAKE failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) cp Ptrace.pm blib/lib/Sys/Ptrace.pm
Running Mkbootstrap for Sys::Ptrace ()
Please specify prototyping behavior for Ptrace.xs (see perlxs manual)
Can't locate loadable object for module Sys::Ptrace in @INC (@INC contains: blib/arch blib/lib /home/imacat/lib/perl5 /opt/perl/testers/5.8.8/lib/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/5.8.8/lib/5.8.8 /opt/perl/testers/5.8.8/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/5.8.8/lib/site_perl/5.8.8 /opt/perl/testers/5.8.8/lib/site_perl .) at Sys-Ptrace.spec.PL line 10
make: *** [Sys-Ptrace.spec] Error 2
make: *** Waiting for unfinished jobs....
Ptrace.xs: In function 'XS_Sys__Ptrace__ptrace':
Ptrace.xs:348: warning: cast to pointer from integer of different size
Ptrace.xs:348: warning: cast to pointer from integer of different size



******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.0307.

--

Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
  Platform:
    osname=linux, osvers=2.6.22.10, archname=x86_64-linux-thread-multi-ld
    uname='linux rinse 2.6.22.10 #1 smp tue nov 20 02:36:22 cst 2007 x86_64 gnulinux '
    config_args='-d -Dprefix=/opt/perl/testers/5.8.8 -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g -O3 -Dd_dosuid -Dinc_version_list=none -Acccdlflags=-fPIC -Duseshrplib=true -Dcf_email=imacat@mail.imacat.idv.tw'
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=define use64bitall=define uselongdouble=define
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
    optimize='-g -O3',
    cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include'
    ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers=''
    intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
    ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
    alignbytes=16, prototype=define
  Linker and Libraries:
    ld='gcc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib
    libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
    perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
    libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so
    gnulibc_version='2.3.6'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/opt/perl/testers/5.8.8/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE'
    cccdlflags=' -fPIC', lddlflags='-shared -L/usr/local/lib'

• FAIL Sys-Ptrace-0.05 x86_64-linux-thread-multi-ld 2.6.22.10 by imacat
• FAIL Sys-Ptrace-0.05 x86_64-linux-thread-multi-ld 2.6.22.10 by imacat