Front page | perl.cpan.testers |
Postings from April 2008
FAIL Array-Splice-0.04 i386-netbsd-thread-multi-64int 3.1
Thread Previous
|
Thread Next
From:
chris
Date:
April 2, 2008 09:43
Subject:
FAIL Array-Splice-0.04 i386-netbsd-thread-multi-64int 3.1
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear NOBULL,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.80. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'fetch':
[MSG] [Wed Apr 2 17:40:51 2008] Trying to get 'http://www.cpan.org/authors/id/N/NO/NOBULL/CHECKSUMS'
[MSG] [Wed Apr 2 17:40:52 2008] Checksum matches for 'Array-Splice-0.04.tar.gz'
[MSG] [Wed Apr 2 17:40:52 2008] Extracted 'Array-Splice-0.04'
[MSG] [Wed Apr 2 17:40:52 2008] Extracted 'Array-Splice-0.04/Build.PL'
[MSG] [Wed Apr 2 17:40:52 2008] Extracted 'Array-Splice-0.04/Changes'
[MSG] [Wed Apr 2 17:40:52 2008] Extracted 'Array-Splice-0.04/Makefile.PL'
[MSG] [Wed Apr 2 17:40:52 2008] Extracted 'Array-Splice-0.04/MANIFEST'
[MSG] [Wed Apr 2 17:40:52 2008] Extracted 'Array-Splice-0.04/META.yml'
[MSG] [Wed Apr 2 17:40:52 2008] Extracted 'Array-Splice-0.04/README'
[MSG] [Wed Apr 2 17:40:53 2008] Extracted 'Array-Splice-0.04/lib'
[MSG] [Wed Apr 2 17:40:53 2008] Extracted 'Array-Splice-0.04/lib/Array'
[MSG] [Wed Apr 2 17:40:53 2008] Extracted 'Array-Splice-0.04/lib/Array/Splice.pm'
[MSG] [Wed Apr 2 17:40:53 2008] Extracted 'Array-Splice-0.04/lib/Array/Splice.xs'
[MSG] [Wed Apr 2 17:40:53 2008] Extracted 'Array-Splice-0.04/t'
[MSG] [Wed Apr 2 17:40:53 2008] Extracted 'Array-Splice-0.04/t/00-load.t'
[MSG] [Wed Apr 2 17:40:53 2008] Extracted 'Array-Splice-0.04/t/boilerplate.t'
[MSG] [Wed Apr 2 17:40:53 2008] Extracted 'Array-Splice-0.04/t/error.t'
[MSG] [Wed Apr 2 17:40:53 2008] Extracted 'Array-Splice-0.04/t/pod-coverage.t'
[MSG] [Wed Apr 2 17:40:53 2008] Extracted 'Array-Splice-0.04/t/pod.t'
[MSG] [Wed Apr 2 17:40:53 2008] Extracted 'Array-Splice-0.04/t/push.t'
[MSG] [Wed Apr 2 17:40:53 2008] Extracted 'Array-Splice-0.04/t/refcount.t'
[MSG] [Wed Apr 2 17:40:53 2008] Extracted 'Array-Splice-0.04/t/splice.t'
[MSG] [Wed Apr 2 17:40:53 2008] Extracted 'Array-Splice-0.04/t/tie.t'
[MSG] [Wed Apr 2 17:40:53 2008] Extracted 'Array::Splice' to '/home/cpan/perl587/.cpanplus/5.8.7/build/Array-Splice-0.04'
[MSG] [Wed Apr 2 17:40:54 2008] # running Build.PL
/home/cpan/perl587/bin/perl Build.PL
Warning: this distribution contains XS files, but Module::Build is not configured with C_support. Please install ExtUtils::CBuilder to enable C_support.
Checking whether your kit is complete...
Looks good
Checking prerequisites...
Looks good
Creating new 'Build' script for 'Array-Splice' version '0.04'
Unknown 'build_class', defaulting to 'Module::Build'
[MSG] [Wed Apr 2 17:40:54 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[ERROR] [Wed Apr 2 17:40:55 2008] MAKE failed: /home/cpan/perl587/bin/perl Build --makefile_env_macros 1
Copying lib/Array/Splice.pm -> blib/lib/Array/Splice.pm
lib/Array/Splice.xs -> lib/Array/Splice.c
/home/cpan/perl587/bin/perl -I/home/cpan/perl587/lib/5.8.7/i386-netbsd-thread-multi-64int -I/home/cpan/perl587/lib/5.8.7 /home/cpan/perl587/lib/5.8.7/ExtUtils/xsubpp -noprototypes -typemap /home/cpan/perl587/lib/5.8.7/ExtUtils/typemap lib/Array/Splice.xs
Module::Build is not configured with C_support at /home/cpan/perl587/lib/site_perl/5.8.7/Module/Build/Base.pm line 3887.
gmake:
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Test::More 0.70 0
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPAN::YACSmoke 0.0307.
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
PATH = /home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/bin:/usr/local/sbin
PERL5_CPANPLUS_IS_RUNNING = 15201
PERL5_CPANPLUS_IS_VERSION = 0.80
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/pkg/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/perl587/bin/perl
UID: $< = 1002
EUID: $> = 1002
GID: $( = 100 100
EGID: $) = 100 100
-------------------------------
--
Summary of my perl5 (revision 5 version 8 subversion 7) configuration:
Platform:
osname=netbsd, osvers=3.1, archname=i386-netbsd-thread-multi-64int
uname='netbsd canker.bingosnet.co.uk 3.1 netbsd 3.1 (generic_laptop) #0: tue oct 31 04:32:05 utc 2006 builds@b0.netbsd.org:homebuildsabnetbsd-3-1-releasei386200610302053z-objhomebuildsabnetbsd-3-1-releasesrcsysarchi386compilegeneric_laptop i386 '
config_args=''
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=undef uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fno-strict-aliasing -pipe -I/usr/pkg/include',
optimize='-O',
cppflags='-fno-strict-aliasing -pipe -I/usr/pkg/include'
ccversion='', gccversion='3.3.3 (NetBSD nb3 20040520)', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -Wl,-rpath,/usr/pkg/lib -Wl,-rpath,/usr/local/lib -L/usr/pkg/lib'
libpth=/usr/pkg/lib /lib /usr/lib
libs=-lgdbm -lm -lcrypt -lutil -lc -lposix -lpthread
perllibs=-lm -lcrypt -lutil -lc -lposix -lpthread
libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E '
cccdlflags='-DPIC -fPIC ', lddlflags='--whole-archive -shared -L/usr/pkg/lib'
Thread Previous
|
Thread Next