FAIL Proc-SafeExec-1.3 darwin-thread-multi-64int 8.10.0

This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.

--

Dear BILBO,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Wed Apr  2 03:13:45 2008] Trying to get 'http://www.cpan.org/authors/id/B/BI/BILBO/CHECKSUMS'
[MSG] [Wed Apr  2 03:13:46 2008] Checksum matches for 'Proc-SafeExec-1.3.tar.gz'
[MSG] [Wed Apr  2 03:13:46 2008] Extracted 'Proc-SafeExec-1.3'
[MSG] [Wed Apr  2 03:13:46 2008] Extracted 'Proc-SafeExec-1.3/lib'
[MSG] [Wed Apr  2 03:13:46 2008] Extracted 'Proc-SafeExec-1.3/MANIFEST'
[MSG] [Wed Apr  2 03:13:46 2008] Extracted 'Proc-SafeExec-1.3/t'
[MSG] [Wed Apr  2 03:13:46 2008] Extracted 'Proc-SafeExec-1.3/Makefile.PL'
[MSG] [Wed Apr  2 03:13:46 2008] Extracted 'Proc-SafeExec-1.3/META.yml'
[MSG] [Wed Apr  2 03:13:46 2008] Extracted 'Proc-SafeExec-1.3/t/Proc-SafeExec.t'
[MSG] [Wed Apr  2 03:13:46 2008] Extracted 'Proc-SafeExec-1.3/lib/Proc'
[MSG] [Wed Apr  2 03:13:46 2008] Extracted 'Proc-SafeExec-1.3/lib/Proc/SafeExec'
[MSG] [Wed Apr  2 03:13:46 2008] Extracted 'Proc-SafeExec-1.3/lib/Proc/SafeExec.pm'
[MSG] [Wed Apr  2 03:13:46 2008] Extracted 'Proc-SafeExec-1.3/lib/Proc/SafeExec/Queue.pm'
[MSG] [Wed Apr  2 03:13:46 2008] Extracted 'Proc::SafeExec' to '/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/Proc-SafeExec-1.3'
[MSG] [Wed Apr  2 03:13:47 2008] Checking if your kit is complete...
Looks good
Writing Makefile for Proc::SafeExec

[MSG] [Wed Apr  2 03:13:47 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Wed Apr  2 03:13:49 2008] cp lib/Proc/SafeExec.pm blib/lib/Proc/SafeExec.pm
cp lib/Proc/SafeExec/Queue.pm blib/lib/Proc/SafeExec/Queue.pm
Manifying blib/man3/Proc::SafeExec.3
Manifying blib/man3/Proc::SafeExec::Queue.3

[ERROR] [Wed Apr  2 03:13:51 2008] MAKE TEST failed:  PERL_DL_NONLAZY=1 /Volumes/Media/smoke/perl562/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/Proc-SafeExec......Exit status was 256 (1) in Proc::SafeExec, but nothing ever checked it.  (Call exit_status() to check it.)
Exit status was 256 (1) in Proc::SafeExec, but nothing ever checked it.  (Call exit_status() to check it.)
Exit status was 256 (1) in Proc::SafeExec, but nothing ever checked it.  (Call exit_status() to check it.)
# Failed test 2 in t/Proc-SafeExec.t at line 18
#  t/Proc-SafeExec.t line 18 is: ok(not Proc::SafeExec::test() =~ qr/(^|\n)not ok/s);
 Failed 1/2 subtests 

Test Summary Report
-------------------
t/Proc-SafeExec.t (Wstat: 0 Tests: 2 Failed: 1)
  Failed test:  2
Files=1, Tests=2,  1 wallclock secs ( 0.04 usr  0.02 sys +  0.27 cusr  0.10 csys =  0.43 CPU)
Result: FAIL
Failed 1/1 test programs. 1/2 subtests failed.
make: *** [test_dynamic] Error 35

[MSG] [Wed Apr  2 03:13:51 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'


******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 3.07e-02. Powered by POE::Component::CPAN::YACSmoke.

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    PATH = /bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin
    PERL5LIB = :/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/Proc-SafeExec-1.3/blib/lib:/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/Proc-SafeExec-1.3/blib/arch:/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/Proc-SafeExec-1.3/blib
    PERL5_CPANPLUS_IS_EXECUTING = 
    PERL5_CPANPLUS_IS_RUNNING = 4286
    PERL5_CPANPLUS_IS_VERSION = 0.84
    PERL_MM_USE_DEFAULT = 1
    SHELL = /bin/bash
    TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

    Perl: $^X = /Volumes/Media/smoke/perl562/bin/perl
    UID:  $<  = 502
    EUID: $>  = 502
    GID:  $(  = 502 502
    EGID: $)  = 502 502


-------------------------------


--

Summary of my perl5 (revision 5.0 version 6 subversion 2) configuration:
  Platform:
    osname=darwin, osvers=8.10.0, archname=darwin-thread-multi-64int
    uname='darwin afalglas.bingosnet.co.uk 8.10.0 darwin kernel version 8.10.0: wed may 23 16:50:59 pdt 2007; root:xnu-792.21.3~1release_ppc power macintosh powerpc '
    config_args='-e'
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
    useperlio=undef d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=define use64bitall=undef uselongdouble=undef
  Compiler:
    cc='cc', ccflags ='-pipe -fno-common -DPERL_DARWIN -no-cpp-precomp -fno-strict-aliasing -I/usr/local/include',
    optimize='-O3',
    cppflags='-pipe -fno-common -DPERL_DARWIN -no-cpp-precomp -fno-strict-aliasing -I/usr/local/include'
    ccversion='', gccversion='4.0.1 (Apple Computer, Inc. build 5367)', gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=87654321
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
    ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=8, usemymalloc=n, prototype=define
  Linker and Libraries:
    ld='env MACOSX_DEPLOYMENT_TARGET=10.3 cc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /usr/lib
    libs=-ldbm -ldl -lm -lc
    perllibs=-ldl -lm -lc
    libc=/usr/lib/libc.dylib, so=dylib, useshrplib=false, libperl=libperl.a
  Dynamic Linking:
    dlsrc=dl_dyld.xs, dlext=bundle, d_dlsymun=undef, ccdlflags=' '
    cccdlflags=' ', lddlflags=' -bundle -undefined dynamic_lookup -L/usr/local/lib'

• FAIL Proc-SafeExec-1.3 darwin-thread-multi-64int 8.10.0 by chris