Front page | perl.cpan.testers |
Postings from March 2008
FAIL B-Flags-0.01 i86pc-solaris-thread-multi-64int 2.10
From:
chris
Date:
March 30, 2008 15:53
Subject:
FAIL B-Flags-0.01 i86pc-solaris-thread-multi-64int 2.10
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear Simon Cozens,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'fetch':
[MSG] [Sun Mar 30 23:54:50 2008] Trying to get 'http://www.cpan.org/authors/id/R/RU/RURBAN/B-Debugger-0.01_03.tar.gz'
[MSG] [Sun Mar 30 23:54:53 2008] Trying to get 'http://www.cpan.org/authors/id/R/RU/RURBAN/CHECKSUMS'
[MSG] [Sun Mar 30 23:54:54 2008] Checksum matches for 'B-Debugger-0.01_03.tar.gz'
[MSG] [Sun Mar 30 23:54:54 2008] Extracted 'B-Debugger-0.01_03/'
[MSG] [Sun Mar 30 23:54:54 2008] Extracted 'B-Debugger-0.01_03/Artistic'
[MSG] [Sun Mar 30 23:54:54 2008] Extracted 'B-Debugger-0.01_03/Changes'
[MSG] [Sun Mar 30 23:54:54 2008] Extracted 'B-Debugger-0.01_03/Copying'
[MSG] [Sun Mar 30 23:54:54 2008] Extracted 'B-Debugger-0.01_03/Debugger.pm'
[MSG] [Sun Mar 30 23:54:54 2008] Extracted 'B-Debugger-0.01_03/Makefile.PL'
[MSG] [Sun Mar 30 23:54:54 2008] Extracted 'B-Debugger-0.01_03/MANIFEST'
[MSG] [Sun Mar 30 23:54:54 2008] Extracted 'B-Debugger-0.01_03/META.yml'
[MSG] [Sun Mar 30 23:54:54 2008] Extracted 'B-Debugger-0.01_03/README'
[MSG] [Sun Mar 30 23:54:54 2008] Extracted 'B-Debugger-0.01_03/test.pl'
[MSG] [Sun Mar 30 23:54:54 2008] Extracted 'B::Debugger' to '/export/home/chris/perl5.10.0/.cpanplus/5.10.0/build/B-Debugger-0.01_03'
[MSG] [Sun Mar 30 23:54:56 2008] Checking if your kit is complete...
Looks good
Warning: prerequisite B::Flags 0.01 not found.
Warning: prerequisite B::Utils 0.05 not found.
Warning: prerequisite Devel::Hook 0 not found.
Writing Makefile for B::Debugger
[MSG] [Sun Mar 30 23:54:56 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[ERROR] [Sun Mar 30 23:54:56 2008] This distribution depends on B::Flags, but the latest version of B::Flags on CPAN (0.0) doesn't satisfy the specific version dependency (0.01). You may have to resolve this dependency manually.
[MSG] [Sun Mar 30 23:54:56 2008] Module 'B::Debugger' requires 'B::Flags' version '0.01' to be installed
[MSG] [Sun Mar 30 23:54:56 2008] Module 'B::Debugger' requires 'B::Utils' version '0.05' to be installed
[MSG] [Sun Mar 30 23:54:56 2008] Module 'B::Debugger' requires 'Devel::Hook' version '0' to be installed
[ERROR] [Sun Mar 30 23:54:56 2008] This distribution depends on B::Flags, but the latest version of B::Flags on CPAN (0.0) doesn't satisfy the specific version dependency (0.01). You may have to resolve this dependency manually.
[MSG] [Sun Mar 30 23:54:57 2008] Trying to get 'http://www.cpan.org/authors/id/S/SI/SIMON/B-Flags-0.01.tar.gz'
[MSG] [Sun Mar 30 23:54:59 2008] Trying to get 'http://www.cpan.org/authors/id/S/SI/SIMON/CHECKSUMS'
[MSG] [Sun Mar 30 23:55:03 2008] Checksum matches for 'B-Flags-0.01.tar.gz'
[MSG] [Sun Mar 30 23:55:03 2008] Extracted 'B-Flags-0.01/'
[MSG] [Sun Mar 30 23:55:03 2008] Extracted 'B-Flags-0.01/Makefile.PL'
[MSG] [Sun Mar 30 23:55:03 2008] Extracted 'B-Flags-0.01/Changes'
[MSG] [Sun Mar 30 23:55:03 2008] Extracted 'B-Flags-0.01/MANIFEST'
[MSG] [Sun Mar 30 23:55:03 2008] Extracted 'B-Flags-0.01/test.pl'
[MSG] [Sun Mar 30 23:55:03 2008] Extracted 'B-Flags-0.01/Flags.xs'
[MSG] [Sun Mar 30 23:55:03 2008] Extracted 'B-Flags-0.01/typemap'
[MSG] [Sun Mar 30 23:55:03 2008] Extracted 'B-Flags-0.01/Flags.pm'
[MSG] [Sun Mar 30 23:55:03 2008] Extracted 'B::Flags' to '/export/home/chris/perl5.10.0/.cpanplus/5.10.0/build/B-Flags-0.01'
[MSG] [Sun Mar 30 23:55:04 2008] Checking if your kit is complete...
Looks good
Writing Makefile for B::Flags
[MSG] [Sun Mar 30 23:55:04 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[ERROR] [Sun Mar 30 23:55:09 2008] MAKE failed: Illegal seek cp Flags.pm blib/lib/B/Flags.pm
/export/home/chris/perl5.10.0/bin/perl /export/home/chris/perl5.10.0/lib/5.10.0/ExtUtils/xsubpp -typemap /export/home/chris/perl5.10.0/lib/5.10.0/ExtUtils/typemap -typemap typemap Flags.xs > Flags.xsc && mv Flags.xsc Flags.c
Please specify prototyping behavior for Flags.xs (see perlxs manual)
gcc -c -D_REENTRANT -DPTR_IS_LONG -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DPERL_USE_SAFE_PUTENV -O -DVERSION=\"0.01\" -DXS_VERSION=\"0.01\" -fPIC "-I/export/home/chris/perl5.10.0/lib/5.10.0/i86pc-solaris-thread-multi-64int/CORE" Flags.c
Flags.xs: In function `XS_B__OP_privatepv':
Flags.xs:253: error: `OP_THREADSV' undeclared (first use in this function)
Flags.xs:253: error: (Each undeclared identifier is reported only once
Flags.xs:253: error: for each function it appears in.)
Flags.xs: In function `XS_B__SV_flagspv':
Flags.xs:303: error: `SVs_PADBUSY' undeclared (first use in this function)
*** Error code 1
make: Fatal error: Command failed for target `Flags.o'
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPAN::YACSmoke 0.0307. Powered by POE::Component::CPAN::YACSmoke.
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = C
PATH = /export/home/chris/perl/bin:/usr/sfw/bin:/usr/ccs/bin:/usr/local/bin:/usr/bin:
PERL5_CPANPLUS_IS_RUNNING = 19409
PERL5_CPANPLUS_IS_VERSION = 0.84
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /export/home/chris/perl5.10.0/bin/perl
UID: $< = 100
EUID: $> = 100
GID: $( = 1 1
EGID: $) = 1 1
-------------------------------
--
Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
Platform:
osname=solaris, osvers=2.10, archname=i86pc-solaris-thread-multi-64int
uname='sunos soleil 5.10 generic_118855-33 i86pc i386 i86pc '
config_args='-e -Dprefix=/export/home/chris/perl5.10.0 -Dusethreads -Duse64bitint -Dusemymalloc=n'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=undef, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags ='-D_REENTRANT -DPTR_IS_LONG -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DPERL_USE_SAFE_PUTENV',
optimize='-O',
cppflags='-D_REENTRANT -DPTR_IS_LONG -fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='3.4.3 (csl-sol210-3_4-branch+sol_rpath)', gccosandvers='solaris2.10'
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='gcc', ldflags =' -L/usr/local/lib '
libpth=/usr/local/lib /usr/lib /usr/ccs/lib
libs=-lsocket -lnsl -ldl -lm -lpthread -lc
perllibs=-lsocket -lnsl -ldl -lm -lpthread -lc
libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-fPIC', lddlflags='-G -L/usr/local/lib'
-
FAIL B-Flags-0.01 i86pc-solaris-thread-multi-64int 2.10
by chris