FAIL Stem-0.11 x86_64-linux-thread-multi-ld 2.6.22.10

This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.

--
Dear Uri Guttman,
    
This is a computer-generated report for Stem-0.11
on perl 5.10.0, created by CPAN-Reporter-1.12. 

Thank you for uploading your work to CPAN.  However, there was a problem
testing your distribution.

If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:

http://cpantest.grango.org/wiki/CPANAuthorNotes

Sections of this report:

    * Tester comments
    * Program output
    * Prerequisites
    * Environment and other context

------------------------------
TESTER COMMENTS
------------------------------

Additional comments from tester: 

this report is from an automated smoke testing program
and was not reviewed by a human for accuracy

------------------------------
PROGRAM OUTPUT
------------------------------

Output from './Build':


Building Stem

This script will ask you various questions in order to properly
configure, build and install Stem on your system.  Whenever a question
is asked, the default answer will be shown inside [brackets].
Pressing enter will accept the default answer. If a choice needs to be
made from a list of values, that list will be inside (parentheses).

If you have already configured Stem in a previous build, you can put
use_defaults=1 on the Build command line and you won't be prompted for
any answers and the previous settings will be used.

If you want to force a new build, run Build clean.


Stem configuration files are used to create and initialize Stem Cells
(objects). Stem needs to know the list of directories to search to
find its configurations files.

Note that the default has a single absolute path. You can test Stem
configurations easily setting this path when executing run_stem. You
can override or modify the path time with either a shell environment
variable or on the command line of run_stem. See the documentation on
run_stem for how so do this.

The first directory in the list is where the standard Stem
configuration files will be installed.

Enter a list of absolute directory paths separated by ':'.

What directories do you want to search for Stem configuration files?
	 [/usr/local/stem/conf ]/usr/local/stem/conf 

xterm was not found on this system. you can't run the demo programs
without xterm.  Make sure you enter a valid path to xterm or some other
terminal emulator.

NOTE: If you don't have an xterm, you can still run the demo scripts
by hand. Run a *_demo script and see what commands it issues. Take the
part after the -e and run that command in its own terminal window.

Enter the path to xterm (or another compatible terminal emulator) []
Use of uninitialized value $defaults{"xterm_path"} in -x at BuildStem.pm line 485.
can't create blib/bin/run_stem ©Úµ´¤£²ÅÅv­­ªº¾Þ§@ at ./Build line 58
telnet was found at '/usr/bin/telnet'
Copying lib/Stem/TtySock.pm -> blib/lib/Stem/TtySock.pm
Copying lib/Stem/Proc.pm -> blib/lib/Stem/Proc.pm
Copying lib/Stem/Console.pm -> blib/lib/Stem/Console.pm
Copying lib/Stem/Event/Queue.pm -> blib/lib/Stem/Event/Queue.pm
Copying lib/Stem/Cell/Clone.pm -> blib/lib/Stem/Cell/Clone.pm
Copying lib/Stem/Log.pm -> blib/lib/Stem/Log.pm
Copying lib/Stem/Portal.pm -> blib/lib/Stem/Portal.pm
Copying lib/Stem/Id.pm -> blib/lib/Stem/Id.pm
Copying lib/Stem/Test/Flow.pm -> blib/lib/Stem/Test/Flow.pm
Copying lib/Stem/Event/Wx.pm -> blib/lib/Stem/Event/Wx.pm
Copying lib/Stem/Cell/Pipe.pm -> blib/lib/Stem/Cell/Pipe.pm
Copying lib/Stem/Log/File.pm -> blib/lib/Stem/Log/File.pm
Copying lib/Stem/Test/Echo.pm -> blib/lib/Stem/Test/Echo.pm
Copying lib/Stem/Packet.pm -> blib/lib/Stem/Packet.pm
Copying lib/Stem/Socket.pm -> blib/lib/Stem/Socket.pm
Copying lib/Stem/Route.pm -> blib/lib/Stem/Route.pm
Copying lib/Stem/Cron.pm -> blib/lib/Stem/Cron.pm
Copying lib/Stem/Event/Tk.pm -> blib/lib/Stem/Event/Tk.pm
Copying lib/Stem/Trace.pm -> blib/lib/Stem/Trace.pm
Copying lib/Stem/UDPMsg.pm -> blib/lib/Stem/UDPMsg.pm
Copying lib/Stem/Codec.pm -> blib/lib/Stem/Codec.pm
Copying lib/Stem/Event/EventPM.pm -> blib/lib/Stem/Event/EventPM.pm
Copying lib/Stem/Event.pm -> blib/lib/Stem/Event.pm
Copying lib/Stem/Hub.pm -> blib/lib/Stem/Hub.pm
Copying lib/Stem/Log/Entry.pm -> blib/lib/Stem/Log/Entry.pm
Copying lib/Stem/Cell/Flow.pm -> blib/lib/Stem/Cell/Flow.pm
Copying lib/Stem/Conf.pm -> blib/lib/Stem/Conf.pm
Copying lib/Stem/Test/ConfTypes.pm -> blib/lib/Stem/Test/ConfTypes.pm
Copying lib/Stem/Event/Signal.pm -> blib/lib/Stem/Event/Signal.pm
Copying lib/Stem/InstallConfig.pm -> blib/lib/Stem/InstallConfig.pm
Copying lib/Stem/Log/Tail.pm -> blib/lib/Stem/Log/Tail.pm
Copying lib/Stem/Class.pm -> blib/lib/Stem/Class.pm
Copying lib/Stem/Load/Driver.pm -> blib/lib/Stem/Load/Driver.pm
Copying lib/Stem/Cell.pm -> blib/lib/Stem/Cell.pm
Copying lib/Stem/Msg.pm -> blib/lib/Stem/Msg.pm
Copying lib/Stem/Cell/Work.pm -> blib/lib/Stem/Cell/Work.pm
Copying lib/Stem/Test/UDP.pm -> blib/lib/Stem/Test/UDP.pm
Copying lib/Stem/ChatLabel.pm -> blib/lib/Stem/ChatLabel.pm
Copying lib/Stem/Demo/World.pm -> blib/lib/Stem/Demo/World.pm
Copying lib/Stem/Test/PacketIO.pm -> blib/lib/Stem/Test/PacketIO.pm
Copying lib/Stem/SockMsg.pm -> blib/lib/Stem/SockMsg.pm
Copying lib/Stem/Boot.pm -> blib/lib/Stem/Boot.pm
Copying lib/Stem/Load/Ticker.pm -> blib/lib/Stem/Load/Ticker.pm
Copying lib/Stem/Event/Perl.pm -> blib/lib/Stem/Event/Perl.pm
Copying lib/Stem/Codec/YAML.pm -> blib/lib/Stem/Codec/YAML.pm
Copying lib/Stem/Vars.pm -> blib/lib/Stem/Vars.pm
Copying lib/Stem/AsyncIO.pm -> blib/lib/Stem/AsyncIO.pm
Copying lib/Stem/Util.pm -> blib/lib/Stem/Util.pm
Copying lib/Stem/File.pm -> blib/lib/Stem/File.pm
Copying lib/Stem/Codec/Storable.pm -> blib/lib/Stem/Codec/Storable.pm
Copying lib/Stem/Demo/CLI.pm -> blib/lib/Stem/Demo/CLI.pm
Copying lib/Stem/Gather.pm -> blib/lib/Stem/Gather.pm
Copying lib/Stem/Codec/Data/Dumper.pm -> blib/lib/Stem/Codec/Data/Dumper.pm
Copying lib/Stem/DBI.pm -> blib/lib/Stem/DBI.pm
Copying lib/Stem/Inject.pm -> blib/lib/Stem/Inject.pm
Copying lib/Stem/WorkQueue.pm -> blib/lib/Stem/WorkQueue.pm
Copying lib/Stem/Switch.pm -> blib/lib/Stem/Switch.pm
Copying lib/Stem.pm -> blib/lib/Stem.pm
Copying lib/Stem/Debug.pm -> blib/lib/Stem/Debug.pm
Copying lib/Stem/Cell/Sequence.pm -> blib/lib/Stem/Cell/Sequence.pm
Copying bin/run_stem -> blib/bin/run_stem

------------------------------
PREREQUISITES
------------------------------

Prerequisite modules loaded:

    No requirements found

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    LANG = zh_TW
    LANGUAGE = zh_TW
    LC_ALL = zh_TW
    LC_COLLATE = zh_TW
    LC_CTYPE = zh_TW
    LC_MESSAGES = zh_TW
    LC_MONETARY = zh_TW
    LC_NUMERIC = zh_TW
    LC_TIME = zh_TW
    PATH = /home/imacat/bin:/bin:/usr/bin:/opt/java/bin:/usr/local/bin
    PERL5LIB = /home/imacat/lib/perl5
    PERL5_CPANPLUS_IS_RUNNING = 6692
    PERL5_CPAN_IS_RUNNING = 6692
    PERL_CPAN_REPORTER_DIR = /home/imacat/.cpanreporter
    PERL_MM_USE_DEFAULT = 1
    SHELL = /bin/zsh
    TERM = xterm
    TMPDIR = /home/imacat/.cpansmoke/home/tmp

Perl special variables (and OS-specific diagnostics, for MSWin32):

    $^X = /opt/perl/5.10.0/bin/perl
    $UID/$EUID = 1000 / 1000
    $GID = 100 0 4 6 20 24 25 29 34 38 40 44 46 50 100 104 1000
    $EGID = 100 0 4 6 20 24 25 29 34 38 40 44 46 50 100 104 1000

Perl module toolchain versions installed:

    Module              Have     
    ------------------- ---------
    CPAN                1.9205   
    Cwd                 3.2701   
    ExtUtils::CBuilder  0.22     
    ExtUtils::Command   1.14     
    ExtUtils::Install   1.50     
    ExtUtils::MakeMaker 6.44     
    ExtUtils::Manifest  1.51_01  
    ExtUtils::ParseXS   2.19     
    File::Spec          3.2701   
    Module::Build       0.2808_01
    Module::Signature   0.55     
    Test::Harness       3.10     
    Test::More          0.78     
    YAML                0.66     
    YAML::Syck          n/a      
    version             0.74     


--

Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
  Platform:
    osname=linux, osvers=2.6.22.10, archname=x86_64-linux-thread-multi-ld
    uname='linux rinse 2.6.22.10 #1 smp tue nov 20 02:36:22 cst 2007 x86_64 gnulinux '
    config_args='-d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g -O3 -Duse64bitint -Duse64bitall -Dprefix=/opt/perl/5.10.0 -Dd_dosuid -Dinc_version_list=none -Duseshrplib=true -Dcf_email=imacat@mail.imacat.idv.tw'
    hint=recommended, useposix=true, d_sigaction=define
    useithreads=define, usemultiplicity=define
    useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
    use64bitint=define, use64bitall=define, uselongdouble=define
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
    optimize='-g -O3',
    cppflags='-D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include'
    ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers=''
    intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
    ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
    alignbytes=16, prototype=define
  Linker and Libraries:
    ld='gcc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib /lib64 /usr/lib64
    libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
    perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
    libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so
    gnulibc_version='2.3.6'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld/CORE'
    cccdlflags='-fPIC', lddlflags='-shared -g -O3 -L/usr/local/lib'

• FAIL Stem-0.11 x86_64-linux-thread-multi-ld 2.6.22.10 by imacat