FAIL Hatena-API-Auth-0.05 x86_64-linux-thread-multi-ld 2.6.22.10

This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.

--
Dear Naoya Ito,
    
This is a computer-generated report for Hatena-API-Auth-0.05
on perl 5.10.0, created by CPAN-Reporter-1.12. 

Thank you for uploading your work to CPAN.  However, there was a problem
testing your distribution.

If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:

http://cpantest.grango.org/wiki/CPANAuthorNotes

Sections of this report:

    * Tester comments
    * Program output
    * Prerequisites
    * Environment and other context

------------------------------
TESTER COMMENTS
------------------------------

Additional comments from tester: 

this report is from an automated smoke testing program
and was not reviewed by a human for accuracy

------------------------------
PROGRAM OUTPUT
------------------------------

Output from '/usr/bin/make test':

PERL_DL_NONLAZY=1 /opt/perl/5.10.0/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00-load...........# Testing Hatena::API::Auth 0.05, Perl 5.010000, /opt/perl/5.10.0/bin/perl
ok
t/01-methods........'jsonToObj' will be obsoleted. Please use 'from_json' instead. at /home/imacat/.cpan/build/Hatena-API-Auth-0.05-jWAlXi/blib/lib/Hatena/API/Auth.pm line 20
'jsonToObj' will be obsoleted. Please use 'from_json' instead. at /home/imacat/.cpan/build/Hatena-API-Auth-0.05-jWAlXi/blib/lib/Hatena/API/Auth.pm line 20
unexpected end of string while parsing JSON string, at character offset 5 ["tatus : true,\n  use..."] at /home/imacat/.cpan/build/Hatena-API-Auth-0.05-jWAlXi/blib/lib/Hatena/API/Auth.pm line 20
# Looks like you planned 16 tests but only ran 11.
# Looks like your test died just after 11.
 Dubious, test returned 255 (wstat 65280, 0xff00)
 Failed 5/16 subtests 
t/boilerplate.......ok
t/pod-coverage......skipped: Test::Pod::Coverage 1.04 required for testing POD coverage
t/pod...............skipped: Test::Pod 1.14 required for testing POD

Test Summary Report
-------------------
t/01-methods.t  (Wstat: 65280 Tests: 11 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 16 tests but ran 11.
Files=5, Tests=15,  1 wallclock secs ( 0.04 usr  0.00 sys +  0.46 cusr  0.02 csys =  0.52 CPU)
Result: FAIL
Failed 1/5 test programs. 0/15 subtests failed.
make: *** [test_dynamic] Error 255

------------------------------
PREREQUISITES
------------------------------

Prerequisite modules loaded:

requires:

    Module                Need Have   
    --------------------- ---- -------
    Class::Accessor::Fast 0    0.31   
    Class::ErrorHandler   0    0.01   
    Digest::MD5           0    2.36_01
    JSON                  0    2.07   
    LWP::UserAgent        0    2.036  
    Test::More            0    0.78   

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    LANG = zh_TW
    LANGUAGE = zh_TW
    LC_ALL = zh_TW
    LC_COLLATE = zh_TW
    LC_CTYPE = zh_TW
    LC_MESSAGES = zh_TW
    LC_MONETARY = zh_TW
    LC_NUMERIC = zh_TW
    LC_TIME = zh_TW
    PATH = /home/imacat/bin:/bin:/usr/bin:/opt/java/bin:/usr/local/bin
    PERL5LIB = /home/imacat/.cpan/build/Class-ErrorHandler-0.01-wbVmbY/blib/arch:/home/imacat/.cpan/build/Class-ErrorHandler-0.01-wbVmbY/blib/lib:/home/imacat/.cpan/build/Class-Accessor-0.31-AjvldQ/blib/arch:/home/imacat/.cpan/build/Class-Accessor-0.31-AjvldQ/blib/lib:/home/imacat/.cpan/build/JSON-2.07-G0ZV9K/blib/arch:/home/imacat/.cpan/build/JSON-2.07-G0ZV9K/blib/lib:/home/imacat/.cpan/build/Test-MockObject-1.08-HMRJwH/blib/arch:/home/imacat/.cpan/build/Test-MockObject-1.08-HMRJwH/blib/lib:/home/imacat/.cpan/build/UNIVERSAL-can-1.12-XImaUI/blib/arch:/home/imacat/.cpan/build/UNIVERSAL-can-1.12-XImaUI/blib/lib:/home/imacat/.cpan/build/UNIVERSAL-isa-0.06-uCw5I7/blib/arch:/home/imacat/.cpan/build/UNIVERSAL-isa-0.06-uCw5I7/blib/lib:/home/imacat/.cpan/build/Test-Exception-0.27-m4J8e8/blib/arch:/home/imacat/.cpan/build/Test-Exception-0.27-m4J8e8/blib/lib:/home/imacat/.cpan/build/Sub-Uplevel-0.1901-LeqqX3/blib/arch:/home/imacat/.cpan/build/Sub-Uplevel-0.1901-LeqqX3/blib/lib:/home/!
 imacat/lib/perl5
    PERL5_CPANPLUS_IS_RUNNING = 23405
    PERL5_CPAN_IS_RUNNING = 23405
    PERL_CPAN_REPORTER_DIR = /home/imacat/.cpanreporter
    PERL_MM_USE_DEFAULT = 1
    SHELL = /bin/zsh
    TERM = xterm
    TMPDIR = /home/imacat/.cpansmoke/home/tmp

Perl special variables (and OS-specific diagnostics, for MSWin32):

    $^X = /opt/perl/5.10.0/bin/perl
    $UID/$EUID = 1000 / 1000
    $GID = 100 0 4 6 20 24 25 29 34 38 40 44 46 50 100 104 1000
    $EGID = 100 0 4 6 20 24 25 29 34 38 40 44 46 50 100 104 1000

Perl module toolchain versions installed:

    Module              Have     
    ------------------- ---------
    CPAN                1.9205   
    Cwd                 3.2701   
    ExtUtils::CBuilder  0.22     
    ExtUtils::Command   1.14     
    ExtUtils::Install   1.50     
    ExtUtils::MakeMaker 6.44     
    ExtUtils::Manifest  1.51_01  
    ExtUtils::ParseXS   2.19     
    File::Spec          3.2701   
    Module::Build       0.2808_01
    Module::Signature   0.55     
    Test::Harness       3.10     
    Test::More          0.78     
    YAML                0.66     
    YAML::Syck          n/a      
    version             0.74     


--

Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
  Platform:
    osname=linux, osvers=2.6.22.10, archname=x86_64-linux-thread-multi-ld
    uname='linux rinse 2.6.22.10 #1 smp tue nov 20 02:36:22 cst 2007 x86_64 gnulinux '
    config_args='-d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g -O3 -Duse64bitint -Duse64bitall -Dprefix=/opt/perl/5.10.0 -Dd_dosuid -Dinc_version_list=none -Duseshrplib=true -Dcf_email=imacat@mail.imacat.idv.tw'
    hint=recommended, useposix=true, d_sigaction=define
    useithreads=define, usemultiplicity=define
    useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
    use64bitint=define, use64bitall=define, uselongdouble=define
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
    optimize='-g -O3',
    cppflags='-D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include'
    ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers=''
    intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
    ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
    alignbytes=16, prototype=define
  Linker and Libraries:
    ld='gcc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib /lib64 /usr/lib64
    libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
    perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
    libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so
    gnulibc_version='2.3.6'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld/CORE'
    cccdlflags='-fPIC', lddlflags='-shared -g -O3 -L/usr/local/lib'

• FAIL Hatena-API-Auth-0.05 x86_64-linux-thread-multi-ld 2.6.22.10 by imacat