Front page | perl.cpan.testers |
Postings from March 2008
FAIL RAS-AS5200-1.04 x86_64-linux-thread-multi-ld 2.6.22.10
Thread Next
From:
imacat
Date:
March 25, 2008 05:43
Subject:
FAIL RAS-AS5200-1.04 x86_64-linux-thread-multi-ld 2.6.22.10
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear STIGMATA,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Tue Mar 25 20:42:41 2008] Trying to get 'ftp://cpan.cdpa.nsysu.edu.tw/Unix/Lang/CPAN/authors/id/S/ST/STIGMATA/RAS-AS5200-1.04.tar.gz'
[MSG] [Tue Mar 25 20:42:43 2008] Trying to get 'ftp://cpan.cdpa.nsysu.edu.tw/Unix/Lang/CPAN/authors/id/S/ST/STIGMATA/CHECKSUMS'
[MSG] [Tue Mar 25 20:42:44 2008] Checksum matches for 'RAS-AS5200-1.04.tar.gz'
[MSG] [Tue Mar 25 20:42:44 2008] Extracted 'RAS-AS5200-1.04/'
[MSG] [Tue Mar 25 20:42:44 2008] Extracted 'RAS-AS5200-1.04/MANIFEST'
[MSG] [Tue Mar 25 20:42:44 2008] Extracted 'RAS-AS5200-1.04/README'
[MSG] [Tue Mar 25 20:42:44 2008] Extracted 'RAS-AS5200-1.04/MANIFEST.SKIP'
[MSG] [Tue Mar 25 20:42:44 2008] Extracted 'RAS-AS5200-1.04/Makefile.PL'
[MSG] [Tue Mar 25 20:42:44 2008] Extracted 'RAS-AS5200-1.04/test.pl'
[MSG] [Tue Mar 25 20:42:44 2008] Extracted 'RAS-AS5200-1.04/AS5200.pm'
[MSG] [Tue Mar 25 20:42:44 2008] Extracted 'RAS::AS5200' to '/opt/perl/testers/.cpanplus/5.8.8/build/RAS-AS5200-1.04'
[MSG] [Tue Mar 25 20:42:45 2008] Checking if your kit is complete...
Looks good
Warning: prerequisite Net::Telnet 0 not found.
Writing Makefile for RAS::AS5200
[MSG] [Tue Mar 25 20:42:45 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Tue Mar 25 20:42:45 2008] Module 'RAS::AS5200' requires 'Net::Telnet' version '0' to be installed
[MSG] [Tue Mar 25 20:42:45 2008] Trying to get 'ftp://cpan.cdpa.nsysu.edu.tw/Unix/Lang/CPAN/authors/id/J/JR/JROGERS/CHECKSUMS'
[MSG] [Tue Mar 25 20:42:46 2008] Checksum matches for 'Net-Telnet-3.03.tar.gz'
[MSG] [Tue Mar 25 20:42:46 2008] Extracted 'Net-Telnet-3.03/'
[MSG] [Tue Mar 25 20:42:46 2008] Extracted 'Net-Telnet-3.03/Makefile.PL'
[MSG] [Tue Mar 25 20:42:46 2008] Extracted 'Net-Telnet-3.03/ChangeLog'
[MSG] [Tue Mar 25 20:42:46 2008] Extracted 'Net-Telnet-3.03/lib/'
[MSG] [Tue Mar 25 20:42:46 2008] Extracted 'Net-Telnet-3.03/lib/Net/'
[MSG] [Tue Mar 25 20:42:46 2008] Extracted 'Net-Telnet-3.03/lib/Net/Telnet.pm'
[MSG] [Tue Mar 25 20:42:46 2008] Extracted 'Net-Telnet-3.03/t/'
[MSG] [Tue Mar 25 20:42:46 2008] Extracted 'Net-Telnet-3.03/t/select.t'
[MSG] [Tue Mar 25 20:42:46 2008] Extracted 'Net-Telnet-3.03/README'
[MSG] [Tue Mar 25 20:42:46 2008] Extracted 'Net-Telnet-3.03/MANIFEST'
[MSG] [Tue Mar 25 20:42:46 2008] Extracted 'Net::Telnet' to '/opt/perl/testers/.cpanplus/5.8.8/build/Net-Telnet-3.03'
[MSG] [Tue Mar 25 20:42:46 2008] Checking if your kit is complete...
Looks good
Writing Makefile for Net::Telnet
[MSG] [Tue Mar 25 20:42:46 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Tue Mar 25 20:42:47 2008] cp lib/Net/Telnet.pm blib/lib/Net/Telnet.pm
Manifying blib/man3/Net::Telnet.3
[MSG] [Tue Mar 25 20:42:49 2008] MAKE TEST passed: t/select......ok
All tests successful.
Files=1, Tests=3, 0 wallclock secs ( 0.00 usr 0.01 sys + 0.01 cusr 0.01 csys = 0.03 CPU)
Result: PASS
[MSG] [Tue Mar 25 20:42:49 2008] Sending test report for 'Net-Telnet-3.03'
[MSG] [Tue Mar 25 20:42:49 2008] Ok, not sending test report
[MSG] [Tue Mar 25 20:42:52 2008] cp AS5200.pm blib/lib/RAS/AS5200.pm
Manifying blib/man3/RAS::AS5200.3
[ERROR] [Tue Mar 25 20:42:52 2008] MAKE TEST failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) ERROR: RAS::AS5200 - Hostname not specified.
ERROR: There was a problem creating the object.
Test Suite for RAS::AS5200
The tests will connect to a AS5200
and run some benign commands to verify that
things are working properly.
Enter the hostname or IP address of a
AS5200 that will be used for the tests.
Hostname or IP of AS5200:
Please enter the login name used to log into
the AS5200 for the tests. For some older versions
of the IOS, no login name is required.
Login for AS5200:
Please enter the password used to log into
the AS5200 for the tests.
Password for AS5200:
Please enter a regular expression representing
the prompt on the AS5200. Do not include delimiters
or anchors. If you enter nothing, the default
of '\w*[>#]' will be used, which usually works
just fine.
Prompt for AS5200:
The usergrep() test looks for a specified user on a bank
of RAS devices. The userkill() function will look for
the specified user and knock them offline.
Specify here the user that will be located
and terminated. You will also be asked to enter
the Enable password to the AS5200. Enter nothing for
these tests to be skipped.
Username for seek/kill tests: Enable password for seek/kill tests:
### Testing new() method for host
make: *** [test_dynamic] Error 255
[MSG] [Tue Mar 25 20:42:52 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Net::Telnet 3.03 0
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPAN::YACSmoke 0.03.
--
Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
Platform:
osname=linux, osvers=2.6.22.10, archname=x86_64-linux-thread-multi-ld
uname='linux rinse 2.6.22.10 #1 smp sun oct 28 13:30:11 cst 2007 x86_64 gnulinux '
config_args='-d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g -O3 -Duse64bitint -Duse64bitall -Dprefix=/opt/perl/testers -Dd_dosuid -Dinc_version_list=none -Acccdlflags=-fPIC -Duseshrplib=true -Dcf_email=imacat@mail.imacat.idv.tw'
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=define uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-g -O3',
cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include'
ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
alignbytes=16, prototype=define
Linker and Libraries:
ld='gcc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so
gnulibc_version='2.3.6'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE'
cccdlflags=' -fPIC', lddlflags='-shared -L/usr/local/lib'
Thread Next