FAIL Statistics-LineFit-0.07 x86_64-linux-thread-multi-ld 2.6.22.10

This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.

--

Dear RANDERSON,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Tue Mar 25 03:27:50 2008] Trying to get 'ftp://cpan.cdpa.nsysu.edu.tw/Unix/Lang/CPAN/authors/id/R/RA/RANDERSON/Statistics-LineFit-0.07.tar.gz'
[MSG] [Tue Mar 25 03:27:52 2008] Trying to get 'ftp://cpan.cdpa.nsysu.edu.tw/Unix/Lang/CPAN/authors/id/R/RA/RANDERSON/CHECKSUMS'
[MSG] [Tue Mar 25 03:27:54 2008] Checksum matches for 'Statistics-LineFit-0.07.tar.gz'
[MSG] [Tue Mar 25 03:27:54 2008] Extracted 'Statistics-LineFit/'
[MSG] [Tue Mar 25 03:27:54 2008] Extracted 'Statistics-LineFit/Changes'
[MSG] [Tue Mar 25 03:27:54 2008] Extracted 'Statistics-LineFit/INSTALL'
[MSG] [Tue Mar 25 03:27:54 2008] Extracted 'Statistics-LineFit/lib/'
[MSG] [Tue Mar 25 03:27:54 2008] Extracted 'Statistics-LineFit/lib/Statistics/'
[MSG] [Tue Mar 25 03:27:54 2008] Extracted 'Statistics-LineFit/lib/Statistics/LineFit.pm'
[MSG] [Tue Mar 25 03:27:54 2008] Extracted 'Statistics-LineFit/LICENSE'
[MSG] [Tue Mar 25 03:27:54 2008] Extracted 'Statistics-LineFit/Makefile.PL'
[MSG] [Tue Mar 25 03:27:54 2008] Extracted 'Statistics-LineFit/MANIFEST'
[MSG] [Tue Mar 25 03:27:54 2008] Extracted 'Statistics-LineFit/README'
[MSG] [Tue Mar 25 03:27:54 2008] Extracted 'Statistics-LineFit/scripts/'
[MSG] [Tue Mar 25 03:27:54 2008] Extracted 'Statistics-LineFit/t/'
[MSG] [Tue Mar 25 03:27:54 2008] Extracted 'Statistics-LineFit/t/01_load.t'
[MSG] [Tue Mar 25 03:27:54 2008] Extracted 'Statistics-LineFit/t/02_R5ptsU1-D.t'
[MSG] [Tue Mar 25 03:27:54 2008] Extracted 'Statistics-LineFit/t/03_R5ptsW1-D.t'
[MSG] [Tue Mar 25 03:27:54 2008] Extracted 'Statistics-LineFit/t/04_4ptsU1-D.t'
[MSG] [Tue Mar 25 03:27:54 2008] Extracted 'Statistics-LineFit/t/05_4ptsU2-D.t'
[MSG] [Tue Mar 25 03:27:54 2008] Extracted 'Statistics-LineFit/t/06_4ptsW1-D.t'
[MSG] [Tue Mar 25 03:27:54 2008] Extracted 'Statistics-LineFit/t/07_4ptsW2-D.t'
[MSG] [Tue Mar 25 03:27:54 2008] Extracted 'Statistics-LineFit/t/08_3ptsU1-D.t'
[MSG] [Tue Mar 25 03:27:54 2008] Extracted 'Statistics-LineFit/t/09_2ptsU1-D.t'
[MSG] [Tue Mar 25 03:27:54 2008] Extracted 'Statistics-LineFit/t/10_bad_data.t'
[MSG] [Tue Mar 25 03:27:54 2008] Extracted 'Statistics-LineFit/t/11_no_data.t'
[MSG] [Tue Mar 25 03:27:54 2008] Extracted 'Statistics-LineFit/t/12_idempotent.t'
[MSG] [Tue Mar 25 03:27:54 2008] Extracted 'Statistics-LineFit/t/13_long_array.t'
[MSG] [Tue Mar 25 03:27:54 2008] Extracted 'Statistics-LineFit/t/14_scale_weights.t'
[MSG] [Tue Mar 25 03:27:54 2008] Extracted 'Statistics-LineFit/Todo'
[MSG] [Tue Mar 25 03:27:54 2008] Extracted 'Statistics::LineFit' to '/opt/perl/testers/.cpanplus/5.8.8/build/Statistics-LineFit'
[MSG] [Tue Mar 25 03:27:54 2008] Checking if your kit is complete...
Looks good
Writing Makefile for Statistics::LineFit

[MSG] [Tue Mar 25 03:27:54 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Tue Mar 25 03:27:55 2008] cp lib/Statistics/LineFit.pm blib/lib/Statistics/LineFit.pm
Manifying blib/man3/Statistics::LineFit.3

[ERROR] [Tue Mar 25 03:27:57 2008] MAKE TEST failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) t/01_load...............ok
t/02_R5ptsU1-D..........ok
t/03_R5ptsW1-D..........ok
t/04_4ptsU1-D...........ok
t/05_4ptsU2-D...........ok
t/06_4ptsW1-D...........
#   Failed test 'tStatistics[0]'
#   at t/06_4ptsW1-D.t line 27.
#     '1.00564348515241875e-12'
#         <
#     '1e-12'
# Looks like you failed 1 test of 21.
 Dubious, test returned 1 (wstat 256, 0x100)
 Failed 1/21 subtests 
t/07_4ptsW2-D...........
#   Failed test 'tStatistics[0]'
#   at t/07_4ptsW2-D.t line 40.
#     '1.00564348515241875e-12'
#         <
#     '1e-12'
# Looks like you failed 1 test of 21.
 Dubious, test returned 1 (wstat 256, 0x100)
 Failed 1/21 subtests 
t/08_3ptsU1-D...........ok
t/09_2ptsU1-D...........ok
t/10_bad_data...........ok
t/11_no_data............ok
t/12_idempotent.........ok
t/13_long_array.........
#   Failed test 'meanSqError()'
#   at t/13_long_array.t line 27.
#     '5.07640846025836368e-10'
#         <
#     '1e-10'

#   Failed test 'tStatistics[0]'
#   at t/13_long_array.t line 34.
#     '1.0737739586375028e-09'
#         <
#     '1e-10'

#   Failed test 'tStatistics[0]'
#   at t/13_long_array.t line 36.
#     '1.7330953339111943e-09'
#         <
#     '1e-10'
# Looks like you failed 3 tests of 12.
 Dubious, test returned 3 (wstat 768, 0x300)
 Failed 3/12 subtests 
t/14_scale_weights......ok

Test Summary Report
-------------------
t/06_4ptsW1-D.t     (Wstat: 256 Tests: 21 Failed: 1)
  Failed test:  5
  Non-zero exit status: 1
t/07_4ptsW2-D.t     (Wstat: 256 Tests: 21 Failed: 1)
  Failed test:  11
  Non-zero exit status: 1
t/13_long_array.t   (Wstat: 768 Tests: 12 Failed: 3)
  Failed tests:  5, 8-9
  Non-zero exit status: 3
Files=14, Tests=244,  2 wallclock secs ( 0.11 usr  0.02 sys +  1.75 cusr  0.10 csys =  1.98 CPU)
Result: FAIL
Failed 3/14 test programs. 5/244 subtests failed.
make: *** [test_dynamic] Error 255

[MSG] [Tue Mar 25 03:27:57 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'

PREREQUISITES:

Here is a list of prerequisites you specified and versions we 
managed to load:
                                
	  Module Name                        Have     Want
	  Test::Simple                       0.78     0.44

******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.03.

--

Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
  Platform:
    osname=linux, osvers=2.6.22.10, archname=x86_64-linux-thread-multi-ld
    uname='linux rinse 2.6.22.10 #1 smp sun oct 28 13:30:11 cst 2007 x86_64 gnulinux '
    config_args='-d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g -O3 -Duse64bitint -Duse64bitall -Dprefix=/opt/perl/testers -Dd_dosuid -Dinc_version_list=none -Acccdlflags=-fPIC -Duseshrplib=true -Dcf_email=imacat@mail.imacat.idv.tw'
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=define use64bitall=define uselongdouble=define
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
    optimize='-g -O3',
    cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include'
    ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers=''
    intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
    ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
    alignbytes=16, prototype=define
  Linker and Libraries:
    ld='gcc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib
    libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
    perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
    libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so
    gnulibc_version='2.3.6'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE'
    cccdlflags=' -fPIC', lddlflags='-shared -L/usr/local/lib'

• FAIL Statistics-LineFit-0.07 x86_64-linux-thread-multi-ld 2.6.22.10 by imacat