Front page | perl.cpan.testers |
Postings from March 2008
FAIL qdbm-perl-1.8.14 x86_64-linux-thread-multi-ld 2.6.22.10
From:
imacat
Date:
March 23, 2008 08:51
Subject:
FAIL qdbm-perl-1.8.14 x86_64-linux-thread-multi-ld 2.6.22.10
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear MIKIO,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'fetch':
[MSG] [Sun Mar 23 23:50:50 2008] Trying to get 'ftp://cpan.cdpa.nsysu.edu.tw/Unix/Lang/CPAN/authors/id/M/MI/MIKIO/qdbm-perl-1.8.14.tar.gz'
[MSG] [Sun Mar 23 23:50:53 2008] Trying to get 'ftp://cpan.cdpa.nsysu.edu.tw/Unix/Lang/CPAN/authors/id/M/MI/MIKIO/CHECKSUMS'
[MSG] [Sun Mar 23 23:50:55 2008] Checksum matches for 'qdbm-perl-1.8.14.tar.gz'
[MSG] [Sun Mar 23 23:50:55 2008] Extracted 'qdbm-perl-1.8.14/'
[MSG] [Sun Mar 23 23:50:55 2008] Extracted 'qdbm-perl-1.8.14/curia/'
[MSG] [Sun Mar 23 23:50:55 2008] Extracted 'qdbm-perl-1.8.14/curia/Curia.xs'
[MSG] [Sun Mar 23 23:50:55 2008] Extracted 'qdbm-perl-1.8.14/curia/Curia.pm'
[MSG] [Sun Mar 23 23:50:55 2008] Extracted 'qdbm-perl-1.8.14/curia/MANIFEST'
[MSG] [Sun Mar 23 23:50:55 2008] Extracted 'qdbm-perl-1.8.14/curia/Makefile.PL'
[MSG] [Sun Mar 23 23:50:55 2008] Extracted 'qdbm-perl-1.8.14/curia/plcrtest'
[MSG] [Sun Mar 23 23:50:55 2008] Extracted 'qdbm-perl-1.8.14/configure.in'
[MSG] [Sun Mar 23 23:50:55 2008] Extracted 'qdbm-perl-1.8.14/overview'
[MSG] [Sun Mar 23 23:50:55 2008] Extracted 'qdbm-perl-1.8.14/Makefile.in'
[MSG] [Sun Mar 23 23:50:55 2008] Extracted 'qdbm-perl-1.8.14/configure'
[MSG] [Sun Mar 23 23:50:55 2008] Extracted 'qdbm-perl-1.8.14/plapidoc/'
[MSG] [Sun Mar 23 23:50:55 2008] Extracted 'qdbm-perl-1.8.14/plapidoc/Depot.pm.html'
[MSG] [Sun Mar 23 23:50:55 2008] Extracted 'qdbm-perl-1.8.14/plapidoc/Curia.pm.html'
[MSG] [Sun Mar 23 23:50:55 2008] Extracted 'qdbm-perl-1.8.14/plapidoc/Villa.pm.html'
[MSG] [Sun Mar 23 23:50:55 2008] Extracted 'qdbm-perl-1.8.14/plapidoc/index.html'
[MSG] [Sun Mar 23 23:50:55 2008] Extracted 'qdbm-perl-1.8.14/depot/'
[MSG] [Sun Mar 23 23:50:55 2008] Extracted 'qdbm-perl-1.8.14/depot/Depot.pm'
[MSG] [Sun Mar 23 23:50:55 2008] Extracted 'qdbm-perl-1.8.14/depot/Depot.xs'
[MSG] [Sun Mar 23 23:50:55 2008] Extracted 'qdbm-perl-1.8.14/depot/MANIFEST'
[MSG] [Sun Mar 23 23:50:55 2008] Extracted 'qdbm-perl-1.8.14/depot/Makefile.PL'
[MSG] [Sun Mar 23 23:50:55 2008] Extracted 'qdbm-perl-1.8.14/depot/pldptest'
[MSG] [Sun Mar 23 23:50:55 2008] Extracted 'qdbm-perl-1.8.14/mypldoc'
[MSG] [Sun Mar 23 23:50:55 2008] Extracted 'qdbm-perl-1.8.14/villa/'
[MSG] [Sun Mar 23 23:50:55 2008] Extracted 'qdbm-perl-1.8.14/villa/Makefile.PL'
[MSG] [Sun Mar 23 23:50:55 2008] Extracted 'qdbm-perl-1.8.14/villa/MANIFEST'
[MSG] [Sun Mar 23 23:50:55 2008] Extracted 'qdbm-perl-1.8.14/villa/Villa.pm'
[MSG] [Sun Mar 23 23:50:55 2008] Extracted 'qdbm-perl-1.8.14/villa/Villa.xs'
[MSG] [Sun Mar 23 23:50:55 2008] Extracted 'qdbm-perl-1.8.14/villa/plvltest'
[MSG] [Sun Mar 23 23:50:55 2008] Extracted 'qdbm-perl-1.8.14/plspex.html'
[MSG] [Sun Mar 23 23:50:55 2008] Extracted 'qdbm-perl-1.8.14/plspex-ja.html'
[MSG] [Sun Mar 23 23:50:55 2008] Extracted 'qdbm-perl-1.8.14/README.txt'
[MSG] [Sun Mar 23 23:50:55 2008] Extracted 'qdbm::perl' to '/opt/perl/testers/.cpanplus/5.8.8/build/qdbm-perl-1.8.14'
[ERROR] [Sun Mar 23 23:50:55 2008] Unable to find 'Build.PL' or 'Makefile.PL' for 'qdbm::perl'; Will default to 'CPANPLUS::Dist::MM' but might be unable to install!
[MSG] [Sun Mar 23 23:50:55 2008] No 'Makefile.PL' found - attempting to generate one
[MSG] [Sun Mar 23 23:50:56 2008] Checking if your kit is complete...
Looks good
Writing Makefile for Curia
Checking if your kit is complete...
Looks good
Writing Makefile for Depot
Checking if your kit is complete...
Looks good
Writing Makefile for Villa
Writing Makefile for qdbm::perl
[MSG] [Sun Mar 23 23:50:56 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[ERROR] [Sun Mar 23 23:50:59 2008] MAKE failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) cp Curia.pm ../blib/lib/Curia.pm
Running Mkbootstrap for Curia ()
Please specify prototyping behavior for Curia.xs (see perlxs manual)
Curia.xs:20:19: error: depot.h: ¨S¦³¦¹¤@ÀɮשΥؿý
Curia.xs:21:19: error: curia.h: ¨S¦³¦¹¤@ÀɮשΥؿý
Curia.xs: In function 'XS_Curia_plcrerrmsg':
Curia.xs:37: error: 'dpecode' undeclared (first use in this function)
Curia.xs:37: error: (Each undeclared identifier is reported only once
Curia.xs:37: error: for each function it appears in.)
Curia.xs:37: warning: cast to pointer from integer of different size
Curia.xs: In function 'XS_Curia_plcropen':
Curia.xs:49: warning: assignment makes pointer from integer without a cast
Curia.xs: In function 'XS_Curia_plcrget':
Curia.xs:99: warning: assignment makes pointer from integer without a cast
Curia.xs: In function 'XS_Curia_plcriternext':
Curia.xs:134: warning: assignment makes pointer from integer without a cast
make[1]: *** [Curia.o] Error 1
make: *** [subdirs] Error 2
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPAN::YACSmoke 0.03.
--
Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
Platform:
osname=linux, osvers=2.6.22.10, archname=x86_64-linux-thread-multi-ld
uname='linux rinse 2.6.22.10 #1 smp sun oct 28 13:30:11 cst 2007 x86_64 gnulinux '
config_args='-d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g -O3 -Duse64bitint -Duse64bitall -Dprefix=/opt/perl/testers -Dd_dosuid -Dinc_version_list=none -Acccdlflags=-fPIC -Duseshrplib=true -Dcf_email=imacat@mail.imacat.idv.tw'
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=define uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-g -O3',
cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include'
ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
alignbytes=16, prototype=define
Linker and Libraries:
ld='gcc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so
gnulibc_version='2.3.6'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE'
cccdlflags=' -fPIC', lddlflags='-shared -L/usr/local/lib'
-
FAIL qdbm-perl-1.8.14 x86_64-linux-thread-multi-ld 2.6.22.10
by imacat