FAIL XML-AutoWriter-0.39 i686-linux-thread-multi-64int 2.6.22-1-k7

This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.

--
Dear Barrie Slaymaker,
    
This is a computer-generated report for XML-AutoWriter-0.39
on perl 5.9.0 patch 17881, created by CPAN-Reporter-1.12. 

Thank you for uploading your work to CPAN.  However, there was a problem
testing your distribution.

If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:

http://cpantest.grango.org/wiki/CPANAuthorNotes

Sections of this report:

    * Tester comments
    * Program output
    * Prerequisites
    * Environment and other context

------------------------------
TESTER COMMENTS
------------------------------

Additional comments from tester: 

none provided

------------------------------
PROGRAM OUTPUT
------------------------------

Output from '/usr/bin/make test':

PERL_DL_NONLAZY=1 /home/src/perl/repoperls/installed-perls/perl/paMRXam/perl-5.8.0@18300/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/auto........Can't locate XML/Parser.pm in @INC (@INC contains: /home/sand/.cpan/build/XML-AutoWriter-0.39-2itOuL/blib/lib /home/sand/.cpan/build/XML-AutoWriter-0.39-2itOuL/blib/arch /home/src/perl/repoperls/installed-perls/perl/paMRXam/perl-5.8.0@18300/lib/5.9.0/i686-linux-thread-multi-64int /home/src/perl/repoperls/installed-perls/perl/paMRXam/perl-5.8.0@18300/lib/5.9.0 /home/src/perl/repoperls/installed-perls/perl/paMRXam/perl-5.8.0@18300/lib/site_perl/5.9.0/i686-linux-thread-multi-64int /home/src/perl/repoperls/installed-perls/perl/paMRXam/perl-5.8.0@18300/lib/site_perl/5.9.0 /home/src/perl/repoperls/installed-perls/perl/paMRXam/perl-5.8.0@18300/lib/site_perl .) at /home/sand/.cpan/build/XML-AutoWriter-0.39-2itOuL/blib/lib/XML/Doctype.pm line 157.
 Dubious, test returned 2 (wstat 512, 0x200)
 Failed 18/18 subtests 
t/cm_re.......ok
t/dtd.........Can't locate XML/Parser.pm in @INC (@INC contains: /home/sand/.cpan/build/XML-AutoWriter-0.39-2itOuL/blib/lib /home/sand/.cpan/build/XML-AutoWriter-0.39-2itOuL/blib/arch /home/src/perl/repoperls/installed-perls/perl/paMRXam/perl-5.8.0@18300/lib/5.9.0/i686-linux-thread-multi-64int /home/src/perl/repoperls/installed-perls/perl/paMRXam/perl-5.8.0@18300/lib/5.9.0 /home/src/perl/repoperls/installed-perls/perl/paMRXam/perl-5.8.0@18300/lib/site_perl/5.9.0/i686-linux-thread-multi-64int /home/src/perl/repoperls/installed-perls/perl/paMRXam/perl-5.8.0@18300/lib/site_perl/5.9.0 /home/src/perl/repoperls/installed-perls/perl/paMRXam/perl-5.8.0@18300/lib/site_perl .) at /home/sand/.cpan/build/XML-AutoWriter-0.39-2itOuL/blib/lib/XML/Doctype.pm line 157.
 Dubious, test returned 2 (wstat 512, 0x200)
 Failed 55/55 subtests 
t/escape......Can't locate XML/Parser.pm in @INC (@INC contains: /home/sand/.cpan/build/XML-AutoWriter-0.39-2itOuL/blib/lib /home/sand/.cpan/build/XML-AutoWriter-0.39-2itOuL/blib/arch /home/src/perl/repoperls/installed-perls/perl/paMRXam/perl-5.8.0@18300/lib/5.9.0/i686-linux-thread-multi-64int /home/src/perl/repoperls/installed-perls/perl/paMRXam/perl-5.8.0@18300/lib/5.9.0 /home/src/perl/repoperls/installed-perls/perl/paMRXam/perl-5.8.0@18300/lib/site_perl/5.9.0/i686-linux-thread-multi-64int /home/src/perl/repoperls/installed-perls/perl/paMRXam/perl-5.8.0@18300/lib/site_perl/5.9.0 /home/src/perl/repoperls/installed-perls/perl/paMRXam/perl-5.8.0@18300/lib/site_perl .) at /home/sand/.cpan/build/XML-AutoWriter-0.39-2itOuL/blib/lib/XML/Doctype.pm line 157.
 Dubious, test returned 2 (wstat 512, 0x200)
 Failed 83/83 subtests 
t/foo.........Can't locate XML/Parser.pm in @INC (@INC contains: /home/sand/.cpan/build/XML-AutoWriter-0.39-2itOuL/blib/lib /home/sand/.cpan/build/XML-AutoWriter-0.39-2itOuL/blib/arch /home/src/perl/repoperls/installed-perls/perl/paMRXam/perl-5.8.0@18300/lib/5.9.0/i686-linux-thread-multi-64int /home/src/perl/repoperls/installed-perls/perl/paMRXam/perl-5.8.0@18300/lib/5.9.0 /home/src/perl/repoperls/installed-perls/perl/paMRXam/perl-5.8.0@18300/lib/site_perl/5.9.0/i686-linux-thread-multi-64int /home/src/perl/repoperls/installed-perls/perl/paMRXam/perl-5.8.0@18300/lib/site_perl/5.9.0 /home/src/perl/repoperls/installed-perls/perl/paMRXam/perl-5.8.0@18300/lib/site_perl .) at /home/sand/.cpan/build/XML-AutoWriter-0.39-2itOuL/blib/lib/XML/Doctype.pm line 157.
BEGIN failed--compilation aborted at (eval 1) line 12.
 Dubious, test returned 2 (wstat 512, 0x200)
 Failed 1/1 subtests 
t/valid.......Can't locate XML/Parser.pm in @INC (@INC contains: /home/sand/.cpan/build/XML-AutoWriter-0.39-2itOuL/blib/lib /home/sand/.cpan/build/XML-AutoWriter-0.39-2itOuL/blib/arch /home/src/perl/repoperls/installed-perls/perl/paMRXam/perl-5.8.0@18300/lib/5.9.0/i686-linux-thread-multi-64int /home/src/perl/repoperls/installed-perls/perl/paMRXam/perl-5.8.0@18300/lib/5.9.0 /home/src/perl/repoperls/installed-perls/perl/paMRXam/perl-5.8.0@18300/lib/site_perl/5.9.0/i686-linux-thread-multi-64int /home/src/perl/repoperls/installed-perls/perl/paMRXam/perl-5.8.0@18300/lib/site_perl/5.9.0 /home/src/perl/repoperls/installed-perls/perl/paMRXam/perl-5.8.0@18300/lib/site_perl .) at /home/sand/.cpan/build/XML-AutoWriter-0.39-2itOuL/blib/lib/XML/Doctype.pm line 157.
 Dubious, test returned 2 (wstat 512, 0x200)
 Failed 16/16 subtests 

Test Summary Report
-------------------
t/auto.t  (Wstat: 512 Tests: 0 Failed: 0)
  Non-zero exit status: 2
  Parse errors: Bad plan.  You planned 18 tests but ran 0.
t/dtd.t   (Wstat: 512 Tests: 0 Failed: 0)
  Non-zero exit status: 2
  Parse errors: Bad plan.  You planned 55 tests but ran 0.
t/escape.t (Wstat: 512 Tests: 0 Failed: 0)
  Non-zero exit status: 2
  Parse errors: Bad plan.  You planned 83 tests but ran 0.
t/foo.t   (Wstat: 512 Tests: 0 Failed: 0)
  Non-zero exit status: 2
  Parse errors: Bad plan.  You planned 1 tests but ran 0.
t/valid.t (Wstat: 512 Tests: 0 Failed: 0)
  Non-zero exit status: 2
  Parse errors: Bad plan.  You planned 16 tests but ran 0.
Files=6, Tests=9,  0 wallclock secs ( 0.05 usr  0.02 sys +  0.34 cusr  0.04 csys =  0.45 CPU)
Result: FAIL
Failed 5/6 test programs. 0/9 subtests failed.
make: *** [test_dynamic] Fehler 2

------------------------------
PREREQUISITES
------------------------------

Prerequisite modules loaded:

    No requirements found

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    LANG = de_DE.UTF-8
    PATH = /usr/lib/ccache:/home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin
    PERL5LIB = 
    PERL5_CPANPLUS_IS_RUNNING = 22642
    PERL5_CPAN_IS_RUNNING = 22642
    SHELL = /usr/bin/zsh
    TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

    $^X = /home/src/perl/repoperls/installed-perls/perl/paMRXam/perl-5.8.0@18300/bin/perl
    $UID/$EUID = 1005 / 1005
    $GID = 1005 1005
    $EGID = 1005 1005

Perl module toolchain versions installed:

    Module              Have  
    ------------------- ------
    CPAN                1.9205
    Cwd                 3.2701
    ExtUtils::CBuilder  0.22  
    ExtUtils::Command   1.13  
    ExtUtils::Install   1.41  
    ExtUtils::MakeMaker 6.36  
    ExtUtils::Manifest  1.51  
    ExtUtils::ParseXS   n/a   
    File::Spec          3.2701
    Module::Build       0.2808
    Module::Signature   0.55  
    Test::Harness       3.10  
    Test::More          0.72  
    YAML                n/a   
    YAML::Syck          1.04  
    version             0.23  


--

Summary of my perl5 (revision 5.0 version 9 subversion 0 patch 17881) configuration:
  Platform:
    osname=linux, osvers=2.6.22-1-k7, archname=i686-linux-thread-multi-64int
    uname='linux k75 2.6.22-1-k7 #1 smp sun jul 29 15:15:55 utc 2007 i686 gnulinux '
    config_args='-Dprefix=/home/src/perl/repoperls/installed-perls/perl/paMRXam/perl-5.8.0@18300 -Dinstallusrbinperl=n -Uversiononly -Dusedevel -des -Duse64bitint -Dusethreads -Ui_db'
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define useithreads=define usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=define use64bitall=undef uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
    optimize='-O2',
    cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -I/usr/local/include'
    ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
    ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=4, prototype=define
  Linker and Libraries:
    ld='cc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib
    libs=-lnsl -lgdbm -ldb -ldl -lm -lpthread -lc -lcrypt -lutil -lrt
    perllibs=-lnsl -ldl -lm -lpthread -lc -lcrypt -lutil -lrt
    libc=/lib/libc-2.6.1.so, so=so, useshrplib=false, libperl=libperl.a
    gnulibc_version='2.6.1'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-rdynamic'
    cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'

• FAIL XML-AutoWriter-0.39 i686-linux-thread-multi-64int 2.6.22-1-k7 by andreas.koenig.gmwojprw