FAIL Authen-Challenge-Basic-0.1 x86_64-linux-thread-multi-ld 2.6.22.10

This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.

--

Dear LUISMUNOZ,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Sun Mar 23 15:18:06 2008] Trying to get 'ftp://cpan.cdpa.nsysu.edu.tw/Unix/Lang/CPAN/authors/id/L/LU/LUISMUNOZ/Authen-Challenge-Basic-0.1.tar.gz'
[MSG] [Sun Mar 23 15:18:11 2008] Trying to get 'ftp://cpan.cdpa.nsysu.edu.tw/Unix/Lang/CPAN/authors/id/L/LU/LUISMUNOZ/CHECKSUMS'
[MSG] [Sun Mar 23 15:18:13 2008] Checksum matches for 'Authen-Challenge-Basic-0.1.tar.gz'
[MSG] [Sun Mar 23 15:18:13 2008] Extracted 'Authen-Challenge-Basic-0.1/'
[MSG] [Sun Mar 23 15:18:13 2008] Extracted 'Authen-Challenge-Basic-0.1/Makefile.PL'
[MSG] [Sun Mar 23 15:18:13 2008] Extracted 'Authen-Challenge-Basic-0.1/README'
[MSG] [Sun Mar 23 15:18:13 2008] Extracted 'Authen-Challenge-Basic-0.1/t/'
[MSG] [Sun Mar 23 15:18:13 2008] Extracted 'Authen-Challenge-Basic-0.1/t/basic.t'
[MSG] [Sun Mar 23 15:18:13 2008] Extracted 'Authen-Challenge-Basic-0.1/Basic.pm'
[MSG] [Sun Mar 23 15:18:13 2008] Extracted 'Authen::Challenge::Basic' to '/opt/perl/testers/.cpanplus/5.8.8/build/Authen-Challenge-Basic-0.1'
[MSG] [Sun Mar 23 15:18:14 2008] Writing Makefile for Authen::Challenge::Basic

[MSG] [Sun Mar 23 15:18:14 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Sun Mar 23 15:18:14 2008] cp Basic.pm blib/lib/Authen/Challenge/Basic.pm
Manifying blib/man3/Authen::Challenge::Basic.3

[ERROR] [Sun Mar 23 15:18:14 2008] MAKE TEST failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) t/basic......Can't locate MD5.pm in @INC (@INC contains: /opt/perl/testers/.cpanplus/5.8.8/build/Authen-Challenge-Basic-0.1/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Authen-Challenge-Basic-0.1/blib/arch /home/imacat/lib/perl5 /opt/perl/testers/.cpanplus/5.8.8/build/Authen-Challenge-Basic-0.1/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Authen-Challenge-Basic-0.1/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/Authen-Challenge-Basic-0.1/blib /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/5.8.8 /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8 /opt/perl/testers/lib/site_perl .) at /opt/perl/testers/.cpanplus/5.8.8/build/Authen-Challenge-Basic-0.1/blib/lib/Authen/Challenge/Basic.pm line 166.
BEGIN failed--compilation aborted at /opt/perl/testers/.cpanplus/5.8.8/build/Authen-Challenge-Basic-0.1/blib/lib/Authen/Challenge/Basic.pm line 166.
Compilation failed in require at t/basic.t line 2.
BEGIN failed--compilation aborted at t/basic.t line 2.
 Dubious, test returned 2 (wstat 512, 0x200)
 No subtests run 

Test Summary Report
-------------------
t/basic.t (Wstat: 512 Tests: 0 Failed: 0)
  Non-zero exit status: 2
  Parse errors: No plan found in TAP output
Files=1, Tests=0,  0 wallclock secs ( 0.01 usr  0.00 sys +  0.01 cusr  0.00 csys =  0.02 CPU)
Result: FAIL
Failed 1/1 test programs. 0/0 subtests failed.
make: *** [test_dynamic] Error 2

[MSG] [Sun Mar 23 15:18:14 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'


MISSING PREREQUISITES:

It was observed that the test suite seem to fail without these modules:

MD5

As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem.  For example:

WriteMakefile(
    AUTHOR      => 'LUISMUNOZ (cpanplus-info@lists.sf.net)',
    ... # other information
    PREREQ_PM   => {
	'MD5'	=> '0', # or a minimum working version
    }
);

If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be
worth a look.

Thanks! :-)


******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.03.

--

Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
  Platform:
    osname=linux, osvers=2.6.22.10, archname=x86_64-linux-thread-multi-ld
    uname='linux rinse 2.6.22.10 #1 smp sun oct 28 13:30:11 cst 2007 x86_64 gnulinux '
    config_args='-d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g -O3 -Duse64bitint -Duse64bitall -Dprefix=/opt/perl/testers -Dd_dosuid -Dinc_version_list=none -Acccdlflags=-fPIC -Duseshrplib=true -Dcf_email=imacat@mail.imacat.idv.tw'
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=define use64bitall=define uselongdouble=define
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
    optimize='-g -O3',
    cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include'
    ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers=''
    intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
    ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
    alignbytes=16, prototype=define
  Linker and Libraries:
    ld='gcc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib
    libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
    perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
    libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so
    gnulibc_version='2.3.6'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE'
    cccdlflags=' -fPIC', lddlflags='-shared -L/usr/local/lib'

• FAIL Authen-Challenge-Basic-0.1 x86_64-linux-thread-multi-ld 2.6.22.10 by imacat