FAIL Querylet-0.323 x86_64-linux-thread-multi-ld 2.6.22.10

This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.

--
Dear Ricardo SIGNES,
    
This is a computer-generated report for Querylet-0.323
on perl 5.10.0, created by CPAN-Reporter-1.12. 

Thank you for uploading your work to CPAN.  However, there was a problem
testing your distribution.

If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:

http://cpantest.grango.org/wiki/CPANAuthorNotes

Sections of this report:

    * Tester comments
    * Program output
    * Prerequisites
    * Environment and other context

------------------------------
TESTER COMMENTS
------------------------------

Additional comments from tester: 

this report is from an automated smoke testing program
and was not reviewed by a human for accuracy

------------------------------
PROGRAM OUTPUT
------------------------------

Output from '/usr/bin/make test':

PERL_DL_NONLAZY=1 /opt/perl/5.10.0/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00-load...........# Testing 0.323
ok
t/01-makedb.........skipped: these tests require SQLite
t/as_bogus..........syntax error at t/as_bogus.t line 53, at EOF
  (Might be a runaway multi-line {} string starting on line 19)
Execution of t/as_bogus.t aborted due to compilation errors.
 Dubious, test returned 9 (wstat 2304, 0x900)
 No subtests run 
t/as_code...........Scalar found where operator expected at t/as_code.t line 58, near "$q"
  (Might be a runaway multi-line {} string starting on line 22)
	(Missing semicolon on previous line?)
syntax error at t/as_code.t line 58, near "$q"
Execution of t/as_code.t aborted due to compilation errors.
 Dubious, test returned 9 (wstat 2304, 0x900)
 No subtests run 
t/as_csv............Scalar found where operator expected at t/as_csv.t line 48, near "$q"
  (Might be a runaway multi-line {} string starting on line 19)
	(Missing semicolon on previous line?)
syntax error at t/as_csv.t line 48, near "$q"
Execution of t/as_csv.t aborted due to compilation errors.
 Dubious, test returned 9 (wstat 2304, 0x900)
 No subtests run 
t/as_html...........skipped: DBD::SQLite required to run this test
t/as_null...........syntax error at t/as_null.t line 55, at EOF
  (Might be a runaway multi-line {} string starting on line 22)
Execution of t/as_null.t aborted due to compilation errors.
 Dubious, test returned 9 (wstat 2304, 0x900)
 No subtests run 
t/eg_wafer_01.......syntax error at t/eg_wafer_01.t line 85, at EOF
  (Might be a runaway multi-line {} string starting on line 19)
Execution of t/eg_wafer_01.t aborted due to compilation errors.
 Dubious, test returned 9 (wstat 2304, 0x900)
 No subtests run 
t/eg_wafer_02.......syntax error at t/eg_wafer_02.t line 71, at EOF
  (Might be a runaway multi-line {} string starting on line 22)
Execution of t/eg_wafer_02.t aborted due to compilation errors.
 Dubious, test returned 9 (wstat 2304, 0x900)
 No subtests run 
t/eg_wafer_03.......syntax error at t/eg_wafer_03.t line 76, at EOF
  (Might be a runaway multi-line {} string starting on line 19)
Execution of t/eg_wafer_03.t aborted due to compilation errors.
 Dubious, test returned 9 (wstat 2304, 0x900)
 No subtests run 
t/from_3............syntax error at t/from_3.t line 60, at EOF
  (Might be a runaway multi-line {} string starting on line 25)
Execution of t/from_3.t aborted due to compilation errors.
 Dubious, test returned 9 (wstat 2304, 0x900)
 No subtests run 
t/option............# No tests run!
 Dubious, test returned 255 (wstat 65280, 0xff00)
 Failed 2/2 subtests 
t/output............ok
t/pod-coverage......skipped: Test::Pod::Coverage 0.08 required to test POD coverage
t/pod...............skipped: Test::Pod 1.00 required to test POD
t/query.............ok
t/to_dot............syntax error at t/to_dot.t line 46, at EOF
  (Might be a runaway multi-line {} string starting on line 19)
Execution of t/to_dot.t aborted due to compilation errors.
 Dubious, test returned 9 (wstat 2304, 0x900)
 No subtests run 
t/to_file...........syntax error at t/to_file.t line 48, at EOF
  (Might be a runaway multi-line {} string starting on line 19)
Execution of t/to_file.t aborted due to compilation errors.
 Dubious, test returned 9 (wstat 2304, 0x900)
 No subtests run 
t/to_stdout.........Scalar found where operator expected at t/to_stdout.t line 41, near "$q"
  (Might be a runaway multi-line {} string starting on line 19)
	(Missing semicolon on previous line?)
syntax error at t/to_stdout.t line 41, near "$q"
Execution of t/to_stdout.t aborted due to compilation errors.
 Dubious, test returned 9 (wstat 2304, 0x900)
 No subtests run 

Test Summary Report
-------------------
t/as_bogus.t    (Wstat: 2304 Tests: 0 Failed: 0)
  Non-zero exit status: 9
  Parse errors: No plan found in TAP output
t/as_code.t     (Wstat: 2304 Tests: 0 Failed: 0)
  Non-zero exit status: 9
  Parse errors: No plan found in TAP output
t/as_csv.t      (Wstat: 2304 Tests: 0 Failed: 0)
  Non-zero exit status: 9
  Parse errors: No plan found in TAP output
t/as_null.t     (Wstat: 2304 Tests: 0 Failed: 0)
  Non-zero exit status: 9
  Parse errors: No plan found in TAP output
t/eg_wafer_01.t (Wstat: 2304 Tests: 0 Failed: 0)
  Non-zero exit status: 9
  Parse errors: No plan found in TAP output
t/eg_wafer_02.t (Wstat: 2304 Tests: 0 Failed: 0)
  Non-zero exit status: 9
  Parse errors: No plan found in TAP output
t/eg_wafer_03.t (Wstat: 2304 Tests: 0 Failed: 0)
  Non-zero exit status: 9
  Parse errors: No plan found in TAP output
t/from_3.t      (Wstat: 2304 Tests: 0 Failed: 0)
  Non-zero exit status: 9
  Parse errors: No plan found in TAP output
t/option.t      (Wstat: 65280 Tests: 0 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 2 tests but ran 0.
t/to_dot.t      (Wstat: 2304 Tests: 0 Failed: 0)
  Non-zero exit status: 9
  Parse errors: No plan found in TAP output
t/to_file.t     (Wstat: 2304 Tests: 0 Failed: 0)
  Non-zero exit status: 9
  Parse errors: No plan found in TAP output
t/to_stdout.t   (Wstat: 2304 Tests: 0 Failed: 0)
  Non-zero exit status: 9
  Parse errors: No plan found in TAP output
Files=19, Tests=30,  1 wallclock secs ( 0.04 usr  0.02 sys +  1.42 cusr  0.13 csys =  1.61 CPU)
Result: FAIL
Failed 12/19 test programs. 0/30 subtests failed.
make: *** [test_dynamic] Error 9

------------------------------
PREREQUISITES
------------------------------

Prerequisite modules loaded:

requires:

    Module         Need Have 
    -------------- ---- -----
    DBI            1    1.603
    Filter::Simple 0    0.82 
    Test::More     0    0.78 

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    LANG = zh_TW
    LANGUAGE = zh_TW
    LC_ALL = zh_TW
    LC_COLLATE = zh_TW
    LC_CTYPE = zh_TW
    LC_MESSAGES = zh_TW
    LC_MONETARY = zh_TW
    LC_NUMERIC = zh_TW
    LC_TIME = zh_TW
    PATH = /home/imacat/bin:/bin:/usr/bin:/opt/java/bin:/usr/local/bin
    PERL5LIB = /home/imacat/.cpan/build/DBI-1.603-80xW9y/blib/arch:/home/imacat/.cpan/build/DBI-1.603-80xW9y/blib/lib:/home/imacat/lib/perl5
    PERL5_CPANPLUS_IS_RUNNING = 30455
    PERL5_CPAN_IS_RUNNING = 30455
    PERL_CPAN_REPORTER_DIR = /home/imacat/.cpanreporter
    PERL_MM_USE_DEFAULT = 1
    SHELL = /bin/zsh
    TERM = xterm
    TMPDIR = /home/imacat/.cpansmoke/home/tmp

Perl special variables (and OS-specific diagnostics, for MSWin32):

    $^X = /opt/perl/5.10.0/bin/perl
    $UID/$EUID = 1000 / 1000
    $GID = 100 0 4 6 20 24 25 29 34 38 40 44 46 50 100 104 1000
    $EGID = 100 0 4 6 20 24 25 29 34 38 40 44 46 50 100 104 1000

Perl module toolchain versions installed:

    Module              Have     
    ------------------- ---------
    CPAN                1.9205   
    Cwd                 3.2701   
    ExtUtils::CBuilder  0.22     
    ExtUtils::Command   1.14     
    ExtUtils::Install   1.50     
    ExtUtils::MakeMaker 6.44     
    ExtUtils::Manifest  1.51_01  
    ExtUtils::ParseXS   2.19     
    File::Spec          3.2701   
    Module::Build       0.2808_01
    Module::Signature   0.55     
    Test::Harness       3.10     
    Test::More          0.78     
    YAML                0.66     
    YAML::Syck          n/a      
    version             0.74     


--

Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
  Platform:
    osname=linux, osvers=2.6.22.10, archname=x86_64-linux-thread-multi-ld
    uname='linux rinse 2.6.22.10 #1 smp tue nov 20 02:36:22 cst 2007 x86_64 gnulinux '
    config_args='-d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g -O3 -Duse64bitint -Duse64bitall -Dprefix=/opt/perl/5.10.0 -Dd_dosuid -Dinc_version_list=none -Duseshrplib=true -Dcf_email=imacat@mail.imacat.idv.tw'
    hint=recommended, useposix=true, d_sigaction=define
    useithreads=define, usemultiplicity=define
    useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
    use64bitint=define, use64bitall=define, uselongdouble=define
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
    optimize='-g -O3',
    cppflags='-D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include'
    ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers=''
    intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
    ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
    alignbytes=16, prototype=define
  Linker and Libraries:
    ld='gcc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib /lib64 /usr/lib64
    libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
    perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
    libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so
    gnulibc_version='2.3.6'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld/CORE'
    cccdlflags='-fPIC', lddlflags='-shared -g -O3 -L/usr/local/lib'

• FAIL Querylet-0.323 x86_64-linux-thread-multi-ld 2.6.22.10 by imacat