Front page | perl.cpan.testers |
Postings from March 2008
FAIL Rc-0.03 x86_64-linux-thread-multi-ld 2.6.22.10
From:
imacat
Date:
March 22, 2008 01:15
Subject:
FAIL Rc-0.03 x86_64-linux-thread-multi-ld 2.6.22.10
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear JPRIT,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'fetch':
[MSG] [Sat Mar 22 16:15:25 2008] Trying to get 'ftp://cpan.cdpa.nsysu.edu.tw/Unix/Lang/CPAN/authors/id/J/JP/JPRIT/Rc-0.03.tar.gz'
[MSG] [Sat Mar 22 16:15:28 2008] Trying to get 'ftp://cpan.cdpa.nsysu.edu.tw/Unix/Lang/CPAN/authors/id/J/JP/JPRIT/CHECKSUMS'
[MSG] [Sat Mar 22 16:15:29 2008] Checksum matches for 'Rc-0.03.tar.gz'
[MSG] [Sat Mar 22 16:15:29 2008] Extracted 'Rc-0.03/'
[MSG] [Sat Mar 22 16:15:29 2008] Extracted 'Rc-0.03/rc.h'
[MSG] [Sat Mar 22 16:15:29 2008] Extracted 'Rc-0.03/lib/'
[MSG] [Sat Mar 22 16:15:29 2008] Extracted 'Rc-0.03/lib/Rc/'
[MSG] [Sat Mar 22 16:15:29 2008] Extracted 'Rc-0.03/lib/Rc/Deparse.pm'
[MSG] [Sat Mar 22 16:15:29 2008] Extracted 'Rc-0.03/lib/Rc/Csh.pm'
[MSG] [Sat Mar 22 16:15:29 2008] Extracted 'Rc-0.03/lib/Rc/Sh.pm'
[MSG] [Sat Mar 22 16:15:29 2008] Extracted 'Rc-0.03/lib/Rc/Terse.pm'
[MSG] [Sat Mar 22 16:15:29 2008] Extracted 'Rc-0.03/lib/Rc.pm'
[MSG] [Sat Mar 22 16:15:29 2008] Extracted 'Rc-0.03/Rc.xs'
[MSG] [Sat Mar 22 16:15:29 2008] Extracted 'Rc-0.03/README'
[MSG] [Sat Mar 22 16:15:29 2008] Extracted 'Rc-0.03/y.tab.c'
[MSG] [Sat Mar 22 16:15:29 2008] Extracted 'Rc-0.03/footobar.c'
[MSG] [Sat Mar 22 16:15:29 2008] Extracted 'Rc-0.03/MANIFEST'
[MSG] [Sat Mar 22 16:15:29 2008] Extracted 'Rc-0.03/lex.c'
[MSG] [Sat Mar 22 16:15:29 2008] Extracted 'Rc-0.03/tree.c'
[MSG] [Sat Mar 22 16:15:29 2008] Extracted 'Rc-0.03/y.tab.h'
[MSG] [Sat Mar 22 16:15:29 2008] Extracted 'Rc-0.03/input.c'
[MSG] [Sat Mar 22 16:15:29 2008] Extracted 'Rc-0.03/Makefile.PL'
[MSG] [Sat Mar 22 16:15:29 2008] Extracted 'Rc-0.03/u/'
[MSG] [Sat Mar 22 16:15:29 2008] Extracted 'Rc-0.03/u/diffs'
[MSG] [Sat Mar 22 16:15:29 2008] Extracted 'Rc-0.03/u/FromRC'
[MSG] [Sat Mar 22 16:15:29 2008] Extracted 'Rc-0.03/u/mkpatch.sh'
[MSG] [Sat Mar 22 16:15:29 2008] Extracted 'Rc-0.03/u/gen.pl'
[MSG] [Sat Mar 22 16:15:29 2008] Extracted 'Rc-0.03/t/'
[MSG] [Sat Mar 22 16:15:29 2008] Extracted 'Rc-0.03/t/rcrc'
[MSG] [Sat Mar 22 16:15:29 2008] Extracted 'Rc-0.03/t/trip.t'
[MSG] [Sat Mar 22 16:15:29 2008] Extracted 'Rc-0.03/t/expect.trip'
[MSG] [Sat Mar 22 16:15:29 2008] Extracted 'Rc-0.03/t/trip.rc'
[MSG] [Sat Mar 22 16:15:29 2008] Extracted 'Rc-0.03/pl/'
[MSG] [Sat Mar 22 16:15:29 2008] Extracted 'Rc-0.03/pl/rcconvert'
[MSG] [Sat Mar 22 16:15:29 2008] Extracted 'Rc-0.03/print.c'
[MSG] [Sat Mar 22 16:15:29 2008] Extracted 'Rc-0.03/parse.y'
[MSG] [Sat Mar 22 16:15:29 2008] Extracted 'Rc-0.03/MANIFEST.SKIP'
[MSG] [Sat Mar 22 16:15:29 2008] Extracted 'Rc-0.03/typemap'
[MSG] [Sat Mar 22 16:15:29 2008] Extracted 'Rc-0.03/nalloc.c'
[MSG] [Sat Mar 22 16:15:29 2008] Extracted 'Rc-0.03/TODO'
[MSG] [Sat Mar 22 16:15:29 2008] Extracted 'Rc-0.03/heredoc.c'
[MSG] [Sat Mar 22 16:15:29 2008] Extracted 'Rc' to '/opt/perl/testers/.cpanplus/5.8.8/build/Rc-0.03'
[MSG] [Sat Mar 22 16:15:30 2008] Checking if your kit is complete...
Looks good
Writing Makefile for Rc
[MSG] [Sat Mar 22 16:15:30 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[ERROR] [Sat Mar 22 16:15:33 2008] MAKE failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) cp lib/Rc/Deparse.pm blib/lib/Rc/Deparse.pm
cp lib/Rc/Terse.pm blib/lib/Rc/Terse.pm
cp lib/Rc/Sh.pm blib/lib/Rc/Sh.pm
cp lib/Rc/Csh.pm blib/lib/Rc/Csh.pm
cp lib/Rc.pm blib/lib/Rc.pm
print.c: In function 'intconv':
print.c:107: warning: 'short int' is promoted to 'int' when passed through '...'
print.c:107: warning: (so you should pass 'int' not 'short int' to 'va_arg')
print.c:107: note: if this code is reached, the program will abort
Running Mkbootstrap for Rc ()
In file included from Rc.xs:7:
rc.h:338: error: conflicting types for 'Perl_warn'
/opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE/proto.h:1309: error: previous declaration of 'Perl_warn' was here
In file included from Rc.xs:7:
rc.h:339:1: warning: "warn" redefined
In file included from /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE/perl.h:756,
from Rc.xs:4:
/opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE/embed.h:4200:1: warning: this is the location of the previous definition
make: *** [Rc.o] Error 1
make: *** Waiting for unfinished jobs....
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPAN::YACSmoke 0.03.
--
Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
Platform:
osname=linux, osvers=2.6.22.10, archname=x86_64-linux-thread-multi-ld
uname='linux rinse 2.6.22.10 #1 smp sun oct 28 13:30:11 cst 2007 x86_64 gnulinux '
config_args='-d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g -O3 -Duse64bitint -Duse64bitall -Dprefix=/opt/perl/testers -Dd_dosuid -Dinc_version_list=none -Acccdlflags=-fPIC -Duseshrplib=true -Dcf_email=imacat@mail.imacat.idv.tw'
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=define uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-g -O3',
cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include'
ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
alignbytes=16, prototype=define
Linker and Libraries:
ld='gcc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so
gnulibc_version='2.3.6'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE'
cccdlflags=' -fPIC', lddlflags='-shared -L/usr/local/lib'
-
FAIL Rc-0.03 x86_64-linux-thread-multi-ld 2.6.22.10
by imacat