FAIL Term-ANSIMenu-0.02 x86_64-linux-thread-multi-ld 2.6.22.10

This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.

--

Dear JADEV,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Fri Mar 21 18:31:20 2008] Trying to get 'ftp://cpan.cdpa.nsysu.edu.tw/Unix/Lang/CPAN/authors/id/J/JA/JADEV/Term-ANSIMenu-0.02.tar.gz'
[MSG] [Fri Mar 21 18:31:21 2008] Trying to get 'ftp://cpan.cdpa.nsysu.edu.tw/Unix/Lang/CPAN/authors/id/J/JA/JADEV/CHECKSUMS'
[MSG] [Fri Mar 21 18:31:23 2008] Checksum matches for 'Term-ANSIMenu-0.02.tar.gz'
[MSG] [Fri Mar 21 18:31:23 2008] Extracted 'Term-ANSIMenu-0.02/'
[MSG] [Fri Mar 21 18:31:23 2008] Extracted 'Term-ANSIMenu-0.02/README'
[MSG] [Fri Mar 21 18:31:23 2008] Extracted 'Term-ANSIMenu-0.02/Makefile.PL'
[MSG] [Fri Mar 21 18:31:23 2008] Extracted 'Term-ANSIMenu-0.02/Changes'
[MSG] [Fri Mar 21 18:31:23 2008] Extracted 'Term-ANSIMenu-0.02/example.pl'
[MSG] [Fri Mar 21 18:31:23 2008] Extracted 'Term-ANSIMenu-0.02/ANSIMenu.pm'
[MSG] [Fri Mar 21 18:31:23 2008] Extracted 'Term-ANSIMenu-0.02/MANIFEST'
[MSG] [Fri Mar 21 18:31:23 2008] Extracted 'Term-ANSIMenu-0.02/test.pl'
[MSG] [Fri Mar 21 18:31:23 2008] Extracted 'Term::ANSIMenu' to '/opt/perl/testers/.cpanplus/5.8.8/build/Term-ANSIMenu-0.02'
[MSG] [Fri Mar 21 18:31:23 2008] Checking if your kit is complete...
Looks good
Writing Makefile for Term::ANSIMenu
Warning: prerequisite Term::ReadKey 0 not found.

[MSG] [Fri Mar 21 18:31:23 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Fri Mar 21 18:31:23 2008] Module 'Term::ANSIMenu' requires 'Term::ReadKey' version '0' to be installed 
[MSG] [Fri Mar 21 18:31:23 2008] Trying to get 'ftp://cpan.cdpa.nsysu.edu.tw/Unix/Lang/CPAN/authors/id/J/JS/JSTOWE/CHECKSUMS'
[MSG] [Fri Mar 21 18:31:24 2008] Checksum matches for 'TermReadKey-2.30.tar.gz'
[MSG] [Fri Mar 21 18:31:24 2008] Extracted 'TermReadKey-2.30/'
[MSG] [Fri Mar 21 18:31:24 2008] Extracted 'TermReadKey-2.30/genchars.pl'
[MSG] [Fri Mar 21 18:31:24 2008] Extracted 'TermReadKey-2.30/Makefile.PL'
[MSG] [Fri Mar 21 18:31:24 2008] Extracted 'TermReadKey-2.30/Configure.pm'
[MSG] [Fri Mar 21 18:31:24 2008] Extracted 'TermReadKey-2.30/test.pl'
[MSG] [Fri Mar 21 18:31:24 2008] Extracted 'TermReadKey-2.30/ReadKey.pm'
[MSG] [Fri Mar 21 18:31:24 2008] Extracted 'TermReadKey-2.30/META.yml'
[MSG] [Fri Mar 21 18:31:24 2008] Extracted 'TermReadKey-2.30/ReadKey.xs'
[MSG] [Fri Mar 21 18:31:24 2008] Extracted 'TermReadKey-2.30/ppport.h'
[MSG] [Fri Mar 21 18:31:24 2008] Extracted 'TermReadKey-2.30/MANIFEST'
[MSG] [Fri Mar 21 18:31:24 2008] Extracted 'TermReadKey-2.30/README'
[MSG] [Fri Mar 21 18:31:24 2008] Extracted 'Term::ReadKey' to '/opt/perl/testers/.cpanplus/5.8.8/build/TermReadKey-2.30'
[MSG] [Fri Mar 21 18:31:25 2008] Checking if your kit is complete...
Looks good
Writing Makefile for Term::ReadKey

[MSG] [Fri Mar 21 18:31:25 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Fri Mar 21 18:31:26 2008] cp ReadKey.pm blib/lib/Term/ReadKey.pm
AutoSplitting blib/lib/Term/ReadKey.pm (blib/lib/auto/Term/ReadKey)
Running Mkbootstrap for Term::ReadKey ()

Writing termio/termios section of cchars.h... Done.
Checking for sgtty...
	Sgtty NOT found.
Writing sgtty section of cchars.h... Done.
In file included from ReadKey.xs:6:
ppport.h:230:1: warning: "PERL_UNUSED_DECL" redefined
In file included from ReadKey.xs:4:
/opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE/perl.h:163:1: warning: this is the location of the previous definition
Manifying blib/man3/Term::ReadKey.3

[MSG] [Fri Mar 21 18:31:27 2008] MAKE TEST passed: 1 .. 8
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8

[MSG] [Fri Mar 21 18:31:27 2008] Sending test report for 'TermReadKey-2.30'
[MSG] [Fri Mar 21 18:31:27 2008] Ok, not sending test report
[MSG] [Fri Mar 21 18:31:27 2008] cp ANSIMenu.pm blib/lib/Term/ANSIMenu.pm
cp example.pl blib/lib/Term/example.pl
Manifying blib/man3/Term::ANSIMenu.3

[ERROR] [Fri Mar 21 18:31:27 2008] MAKE TEST failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) 1..79
# Running under perl version 5.008008 for linux
# Current time local: Fri Mar 21 18:31:27 2008
# Current time GMT:   Fri Mar 21 10:31:27 2008
# Using Test.pm version 1.25
ok 1
ok 2
ok 3
Unable to get Terminal Size. The TIOCGWINSZ ioctl didn't work. The COLUMNS and LINES environment variables didn't work. The resize program didn't work. at /opt/perl/testers/.cpanplus/5.8.8/build/TermReadKey-2.30/blib/lib/Term/ReadKey.pm line 362.
(B[?25hmake: *** [test_dynamic] Error 127

[MSG] [Fri Mar 21 18:31:27 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'

PREREQUISITES:

Here is a list of prerequisites you specified and versions we 
managed to load:
                                
	  Module Name                        Have     Want
	  Carp                               1.04        0
	  Term::ReadKey                      2.30        0

******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.03.

--

Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
  Platform:
    osname=linux, osvers=2.6.22.10, archname=x86_64-linux-thread-multi-ld
    uname='linux rinse 2.6.22.10 #1 smp sun oct 28 13:30:11 cst 2007 x86_64 gnulinux '
    config_args='-d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g -O3 -Duse64bitint -Duse64bitall -Dprefix=/opt/perl/testers -Dd_dosuid -Dinc_version_list=none -Acccdlflags=-fPIC -Duseshrplib=true -Dcf_email=imacat@mail.imacat.idv.tw'
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=define use64bitall=define uselongdouble=define
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
    optimize='-g -O3',
    cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include'
    ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers=''
    intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
    ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
    alignbytes=16, prototype=define
  Linker and Libraries:
    ld='gcc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib
    libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
    perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
    libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so
    gnulibc_version='2.3.6'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE'
    cccdlflags=' -fPIC', lddlflags='-shared -L/usr/local/lib'

• FAIL Term-ANSIMenu-0.02 x86_64-linux-thread-multi-ld 2.6.22.10 by imacat