develooper Front page | perl.cpan.testers | Postings from March 2008

FAIL WWW-Odeon-1.08 x86_64-linux-thread-multi-ld 2.6.22.10

From:
imacat
Date:
March 21, 2008 00:47
Subject:
FAIL WWW-Odeon-1.08 x86_64-linux-thread-multi-ld 2.6.22.10
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.

--

Dear IAINT,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Fri Mar 21 15:47:26 2008] Trying to get 'ftp://cpan.cdpa.nsysu.edu.tw/Unix/Lang/CPAN/authors/id/I/IA/IAINT/WWW-Odeon-1.08.tar.gz'
[MSG] [Fri Mar 21 15:47:28 2008] Trying to get 'ftp://cpan.cdpa.nsysu.edu.tw/Unix/Lang/CPAN/authors/id/I/IA/IAINT/CHECKSUMS'
[MSG] [Fri Mar 21 15:47:29 2008] Checksum matches for 'WWW-Odeon-1.08.tar.gz'
[MSG] [Fri Mar 21 15:47:29 2008] Extracted 'WWW-Odeon-1.08/'
[MSG] [Fri Mar 21 15:47:29 2008] Extracted 'WWW-Odeon-1.08/t/'
[MSG] [Fri Mar 21 15:47:29 2008] Extracted 'WWW-Odeon-1.08/t/oo.t'
[MSG] [Fri Mar 21 15:47:29 2008] Extracted 'WWW-Odeon-1.08/t/retrieval.t'
[MSG] [Fri Mar 21 15:47:29 2008] Extracted 'WWW-Odeon-1.08/t/algorithms.t'
[MSG] [Fri Mar 21 15:47:29 2008] Extracted 'WWW-Odeon-1.08/LICENCE'
[MSG] [Fri Mar 21 15:47:29 2008] Extracted 'WWW-Odeon-1.08/README'
[MSG] [Fri Mar 21 15:47:29 2008] Extracted 'WWW-Odeon-1.08/Changes'
[MSG] [Fri Mar 21 15:47:29 2008] Extracted 'WWW-Odeon-1.08/Makefile.PL'
[MSG] [Fri Mar 21 15:47:29 2008] Extracted 'WWW-Odeon-1.08/Odeon.pm'
[MSG] [Fri Mar 21 15:47:29 2008] Extracted 'WWW-Odeon-1.08/MANIFEST'
[MSG] [Fri Mar 21 15:47:29 2008] Extracted 'WWW::Odeon' to '/opt/perl/testers/.cpanplus/5.8.8/build/WWW-Odeon-1.08'
[MSG] [Fri Mar 21 15:47:29 2008] Checking if your kit is complete...
Looks good
Writing Makefile for WWW::Odeon

[MSG] [Fri Mar 21 15:47:29 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Fri Mar 21 15:47:30 2008] cp Odeon.pm blib/lib/WWW/Odeon.pm
Manifying blib/man3/WWW::Odeon.3

[ERROR] [Fri Mar 21 15:47:33 2008] MAKE TEST failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) t/algorithms......ok
t/oo..............
#   Failed test 'Regions data retrieved as expected'
#   at t/oo.t line 31.

#   Failed test 'Cached data matches expectations'
#   at t/oo.t line 36.

#   Failed test 'Cinema data retrieved as expected'
#   at t/oo.t line 43.

#   Failed test 'Cached data matches expectations'
#   at t/oo.t line 49.
# Looks like you failed 4 tests of 12.
 Dubious, test returned 4 (wstat 1024, 0x400)
 Failed 4/12 subtests 
t/retrieval....... Dubious, test returned 3 (wstat 768, 0x300)
 Failed 3/5 subtests 

Test Summary Report
-------------------
t/oo.t        (Wstat: 1024 Tests: 12 Failed: 4)
  Failed tests:  6, 8-9, 12
  Non-zero exit status: 4
t/retrieval.t (Wstat: 768 Tests: 5 Failed: 3)
  Failed tests:  3-5
  Non-zero exit status: 3
Files=3, Tests=21,  3 wallclock secs ( 0.00 usr  0.00 sys +  0.17 cusr  0.02 csys =  0.19 CPU)
Result: FAIL

#   Failed test 'retrieved 0 regions'
#   at t/retrieval.t line 34.
Use of uninitialized value in concatenation (.) or string at t/retrieval.t line 39.

#   Failed test 'retrieved 0 cinemas from region '
#   at t/retrieval.t line 39.
Use of uninitialized value in pattern match (m//) at t/retrieval.t line 45.
Use of uninitialized value in concatenation (.) or string at t/retrieval.t line 48.

#   Failed test 'retrieved details for cinema '
#   at t/retrieval.t line 48.
# Looks like you failed 3 tests of 5.
Failed 2/3 test programs. 7/21 subtests failed.
make: *** [test_dynamic] Error 3

[MSG] [Fri Mar 21 15:47:33 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'

PREREQUISITES:

Here is a list of prerequisites you specified and versions we 
managed to load:
                                
	  Module Name                        Have     Want
	  LWP::Simple                        1.41        1
	  Test::More                         0.78      0.3

******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.03.

--

Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
  Platform:
    osname=linux, osvers=2.6.22.10, archname=x86_64-linux-thread-multi-ld
    uname='linux rinse 2.6.22.10 #1 smp sun oct 28 13:30:11 cst 2007 x86_64 gnulinux '
    config_args='-d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g -O3 -Duse64bitint -Duse64bitall -Dprefix=/opt/perl/testers -Dd_dosuid -Dinc_version_list=none -Acccdlflags=-fPIC -Duseshrplib=true -Dcf_email=imacat@mail.imacat.idv.tw'
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=define use64bitall=define uselongdouble=define
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
    optimize='-g -O3',
    cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include'
    ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers=''
    intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
    ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
    alignbytes=16, prototype=define
  Linker and Libraries:
    ld='gcc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib
    libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
    perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
    libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so
    gnulibc_version='2.3.6'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE'
    cccdlflags=' -fPIC', lddlflags='-shared -L/usr/local/lib'



Comments to Ask Bjørn Hansen at ask@perl.org | Group listing | About