FAIL ogdl-perl-0.1 x86_64-linux-thread-multi-ld 2.6.22.10

This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.

--

Dear HZHOU,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Fri Mar 21 15:46:57 2008] Trying to get 'ftp://cpan.cdpa.nsysu.edu.tw/Unix/Lang/CPAN/authors/id/H/HZ/HZHOU/ogdl-perl-0.1.tar.gz'
[MSG] [Fri Mar 21 15:47:07 2008] Trying to get 'ftp://cpan.cdpa.nsysu.edu.tw/Unix/Lang/CPAN/authors/id/H/HZ/HZHOU/CHECKSUMS'
[MSG] [Fri Mar 21 15:47:17 2008] Checksum matches for 'ogdl-perl-0.1.tar.gz'
[MSG] [Fri Mar 21 15:47:17 2008] Extracted 'ogdl-perl-0.1/'
[MSG] [Fri Mar 21 15:47:17 2008] Extracted 'ogdl-perl-0.1/Changes'
[MSG] [Fri Mar 21 15:47:17 2008] Extracted 'ogdl-perl-0.1/Graph.pm'
[MSG] [Fri Mar 21 15:47:17 2008] Extracted 'ogdl-perl-0.1/MANIFEST'
[MSG] [Fri Mar 21 15:47:17 2008] Extracted 'ogdl-perl-0.1/Makefile.PL'
[MSG] [Fri Mar 21 15:47:17 2008] Extracted 'ogdl-perl-0.1/Parser.pm'
[MSG] [Fri Mar 21 15:47:17 2008] Extracted 'ogdl-perl-0.1/Path.pm'
[MSG] [Fri Mar 21 15:47:17 2008] Extracted 'ogdl-perl-0.1/README'
[MSG] [Fri Mar 21 15:47:17 2008] Extracted 'ogdl-perl-0.1/pgpath'
[MSG] [Fri Mar 21 15:47:17 2008] Extracted 'ogdl-perl-0.1/t/'
[MSG] [Fri Mar 21 15:47:17 2008] Extracted 'ogdl-perl-0.1/t/test1.t'
[MSG] [Fri Mar 21 15:47:17 2008] Extracted 'ogdl-perl-0.1/t/test2.t'
[MSG] [Fri Mar 21 15:47:17 2008] Extracted 'ogdl-perl-0.1/xml2ogdl'
[MSG] [Fri Mar 21 15:47:17 2008] Extracted 'ogdl-perl-0.1/pgadd'
[MSG] [Fri Mar 21 15:47:17 2008] Extracted 'ogdl-perl-0.1/pgremove'
[MSG] [Fri Mar 21 15:47:17 2008] Extracted 'ogdl-perl-0.1/pgmove'
[MSG] [Fri Mar 21 15:47:17 2008] Extracted 'ogdl-perl-0.1/pglist'
[MSG] [Fri Mar 21 15:47:17 2008] Extracted 'ogdl::perl' to '/opt/perl/testers/.cpanplus/5.8.8/build/ogdl-perl-0.1'
[MSG] [Fri Mar 21 15:47:18 2008] Checking if your kit is complete...
Looks good
Writing Makefile for OGDL::Parser

[MSG] [Fri Mar 21 15:47:18 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Fri Mar 21 15:47:18 2008] cp Graph.pm blib/lib/OGDL/Graph.pm
cp Path.pm blib/lib/OGDL/Path.pm
cp Parser.pm blib/lib/OGDL/Parser.pm
Manifying blib/man3/OGDL::Graph.3
Manifying blib/man3/OGDL::Parser.3

[ERROR] [Fri Mar 21 15:47:18 2008] MAKE TEST failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) t/test1......Use of uninitialized value in string eq at t/test1.t line 79.

#   Failed test 'Path 3 retrieved correctly'
#   at t/test1.t line 79.
Use of uninitialized value in string eq at t/test1.t line 79.

#   Failed test 'Path 6 retrieved correctly'
#   at t/test1.t line 79.
Use of uninitialized value in string eq at t/test1.t line 112.

#   Failed test 'roundtrip block long string1 test'
#   at t/test1.t line 112.
Use of uninitialized value in string eq at t/test1.t line 115.

#   Failed test 'roundtrip quote long string1 test'
#   at t/test1.t line 115.
Use of uninitialized value in string eq at t/test1.t line 118.

#   Failed test 'roundtrip group path selection test'
#   at t/test1.t line 118.

#   Failed test 'Roundtrip test ok'
#   at t/test1.t line 120.
# Looks like you failed 6 tests of 15.
 Dubious, test returned 6 (wstat 1536, 0x600)
 Failed 6/15 subtests 
t/test2......Undefined subroutine &OGDL::Parser::fileToGraph called at t/test2.t line 13.
# Looks like your test died just after 1.
 Dubious, test returned 255 (wstat 65280, 0xff00)
 All 1 subtests passed 

Test Summary Report
-------------------
t/test1.t (Wstat: 1536 Tests: 15 Failed: 6)
  Failed tests:  5, 8, 12-15
  Non-zero exit status: 6
t/test2.t (Wstat: 65280 Tests: 1 Failed: 0)
  Non-zero exit status: 255
Files=2, Tests=16,  0 wallclock secs ( 0.01 usr  0.00 sys +  0.12 cusr  0.00 csys =  0.13 CPU)
Result: FAIL
Failed 2/2 test programs. 6/16 subtests failed.
make: *** [test_dynamic] Error 255

[MSG] [Fri Mar 21 15:47:18 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'


******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.03.

--

Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
  Platform:
    osname=linux, osvers=2.6.22.10, archname=x86_64-linux-thread-multi-ld
    uname='linux rinse 2.6.22.10 #1 smp sun oct 28 13:30:11 cst 2007 x86_64 gnulinux '
    config_args='-d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g -O3 -Duse64bitint -Duse64bitall -Dprefix=/opt/perl/testers -Dd_dosuid -Dinc_version_list=none -Acccdlflags=-fPIC -Duseshrplib=true -Dcf_email=imacat@mail.imacat.idv.tw'
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=define use64bitall=define uselongdouble=define
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
    optimize='-g -O3',
    cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include'
    ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers=''
    intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
    ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
    alignbytes=16, prototype=define
  Linker and Libraries:
    ld='gcc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib
    libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
    perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
    libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so
    gnulibc_version='2.3.6'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE'
    cccdlflags=' -fPIC', lddlflags='-shared -L/usr/local/lib'

• FAIL ogdl-perl-0.1 x86_64-linux-thread-multi-ld 2.6.22.10 by imacat