develooper Front page | perl.cpan.testers | Postings from March 2008

FAIL MIDI-Realtime-0.01 x86_64-linux-thread-multi-ld 2.6.22.10

From:
imacat
Date:
March 20, 2008 20:46
Subject:
FAIL MIDI-Realtime-0.01 x86_64-linux-thread-multi-ld 2.6.22.10
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.

--

Dear FOOCHRE,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Fri Mar 21 11:46:05 2008] Trying to get 'ftp://cpan.cdpa.nsysu.edu.tw/Unix/Lang/CPAN/authors/id/F/FO/FOOCHRE/MIDI-Realtime-0.01.tar.gz'
[MSG] [Fri Mar 21 11:46:07 2008] Trying to get 'ftp://cpan.cdpa.nsysu.edu.tw/Unix/Lang/CPAN/authors/id/F/FO/FOOCHRE/CHECKSUMS'
[MSG] [Fri Mar 21 11:46:08 2008] Checksum matches for 'MIDI-Realtime-0.01.tar.gz'
[MSG] [Fri Mar 21 11:46:08 2008] Extracted 'MIDI/'
[MSG] [Fri Mar 21 11:46:08 2008] Extracted 'MIDI/Realtime-0.01/'
[MSG] [Fri Mar 21 11:46:08 2008] Extracted 'MIDI/Realtime-0.01/Realtime.pm'
[MSG] [Fri Mar 21 11:46:08 2008] Extracted 'MIDI/Realtime-0.01/Makefile.PL'
[MSG] [Fri Mar 21 11:46:08 2008] Extracted 'MIDI/Realtime-0.01/test.pl'
[MSG] [Fri Mar 21 11:46:08 2008] Extracted 'MIDI/Realtime-0.01/Changes'
[MSG] [Fri Mar 21 11:46:08 2008] Extracted 'MIDI/Realtime-0.01/MANIFEST'
[MSG] [Fri Mar 21 11:46:08 2008] Extracted 'MIDI/Realtime-0.01/README'
[MSG] [Fri Mar 21 11:46:08 2008] Extracted 'MIDI::Realtime' to '/opt/perl/testers/.cpanplus/5.8.8/build/MIDI'
[ERROR] [Fri Mar 21 11:46:08 2008] Unable to find 'Build.PL' or 'Makefile.PL' for 'MIDI::Realtime'; Will default to 'CPANPLUS::Dist::MM' but might be unable to install!
[MSG] [Fri Mar 21 11:46:08 2008] No 'Makefile.PL' found - attempting to generate one
[MSG] [Fri Mar 21 11:46:08 2008] Checking if your kit is complete...
Looks good
Writing Makefile for MIDI::Realtime
Writing Makefile for MIDI::Realtime

[MSG] [Fri Mar 21 11:46:08 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Fri Mar 21 11:46:09 2008] cp Realtime.pm ../blib/lib/MIDI/Realtime.pm
Manifying ../blib/man3/MIDI::Realtime.3

[ERROR] [Fri Mar 21 11:46:09 2008] MAKE TEST failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) 1..1
Can't locate sys/soundcard.ph in @INC (did you run h2ph?) (@INC contains: ../blib/lib ../blib/arch /home/imacat/lib/perl5 /opt/perl/testers/.cpanplus/5.8.8/build/MIDI/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/MIDI/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/MIDI/blib /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/5.8.8 /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8 /opt/perl/testers/lib/site_perl .) at ../blib/lib/MIDI/Realtime.pm line 9.
Compilation failed in require at test.pl line 11.
BEGIN failed--compilation aborted at test.pl line 11.
not ok 1
make[1]: *** [test_dynamic] Error 2
make: *** [subdirs-test] Error 2
make: *** Waiting for unfinished jobs....

[MSG] [Fri Mar 21 11:46:09 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'


MISSING PREREQUISITES:

It was observed that the test suite seem to fail without these modules:

sys::soundcard.ph

As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem.  For example:

WriteMakefile(
    AUTHOR      => 'FOOCHRE (cpanplus-info@lists.sf.net)',
    ... # other information
    PREREQ_PM   => {
	'sys::soundcard.ph'	=> '0', # or a minimum working version
    }
);

If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be
worth a look.

Thanks! :-)


******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.03.

--

Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
  Platform:
    osname=linux, osvers=2.6.22.10, archname=x86_64-linux-thread-multi-ld
    uname='linux rinse 2.6.22.10 #1 smp sun oct 28 13:30:11 cst 2007 x86_64 gnulinux '
    config_args='-d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g -O3 -Duse64bitint -Duse64bitall -Dprefix=/opt/perl/testers -Dd_dosuid -Dinc_version_list=none -Acccdlflags=-fPIC -Duseshrplib=true -Dcf_email=imacat@mail.imacat.idv.tw'
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=define use64bitall=define uselongdouble=define
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
    optimize='-g -O3',
    cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include'
    ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers=''
    intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
    ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
    alignbytes=16, prototype=define
  Linker and Libraries:
    ld='gcc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib
    libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
    perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
    libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so
    gnulibc_version='2.3.6'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE'
    cccdlflags=' -fPIC', lddlflags='-shared -L/usr/local/lib'



Comments to Ask Bjørn Hansen at ask@perl.org | Group listing | About