Front page | perl.cpan.testers |
Postings from March 2008
FAIL MCrypt-0.92 x86_64-linux-thread-multi-ld 2.6.22.10
From:
imacat
Date:
March 20, 2008 20:36
Subject:
FAIL MCrypt-0.92 x86_64-linux-thread-multi-ld 2.6.22.10
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear FKUO,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Fri Mar 21 11:35:47 2008] Trying to get 'ftp://cpan.cdpa.nsysu.edu.tw/Unix/Lang/CPAN/authors/id/F/FK/FKUO/MCrypt-0.92.tar.gz'
[MSG] [Fri Mar 21 11:35:48 2008] Trying to get 'ftp://cpan.cdpa.nsysu.edu.tw/Unix/Lang/CPAN/authors/id/F/FK/FKUO/CHECKSUMS'
[MSG] [Fri Mar 21 11:35:49 2008] Checksum matches for 'MCrypt-0.92.tar.gz'
[MSG] [Fri Mar 21 11:35:49 2008] Extracted 'MCrypt-0.92/'
[MSG] [Fri Mar 21 11:35:49 2008] Extracted 'MCrypt-0.92/MCrypt.xs'
[MSG] [Fri Mar 21 11:35:49 2008] Extracted 'MCrypt-0.92/MCrypt.pm'
[MSG] [Fri Mar 21 11:35:49 2008] Extracted 'MCrypt-0.92/Makefile.PL'
[MSG] [Fri Mar 21 11:35:49 2008] Extracted 'MCrypt-0.92/test.pl'
[MSG] [Fri Mar 21 11:35:49 2008] Extracted 'MCrypt-0.92/Changes'
[MSG] [Fri Mar 21 11:35:49 2008] Extracted 'MCrypt-0.92/MANIFEST'
[MSG] [Fri Mar 21 11:35:49 2008] Extracted 'MCrypt-0.92/mc-interface.c'
[MSG] [Fri Mar 21 11:35:49 2008] Extracted 'MCrypt-0.92/README'
[MSG] [Fri Mar 21 11:35:49 2008] Extracted 'MCrypt-0.92/mc-interface.h'
[MSG] [Fri Mar 21 11:35:49 2008] Extracted 'MCrypt' to '/opt/perl/testers/.cpanplus/5.8.8/build/MCrypt-0.92'
[MSG] [Fri Mar 21 11:35:50 2008] Checking if your kit is complete...
Looks good
Writing Makefile for MCrypt
[MSG] [Fri Mar 21 11:35:50 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Fri Mar 21 11:35:51 2008] cp MCrypt.pm blib/lib/MCrypt.pm
AutoSplitting blib/lib/MCrypt.pm (blib/lib/auto/MCrypt)
Running Mkbootstrap for MCrypt ()
mc-interface.c: In function 'pmcrypt_get_cipher_name':
mc-interface.c:33: warning: assignment makes pointer from integer without a cast
MCrypt.xs: In function 'XS_MCrypt__mcrypt_cbc':
MCrypt.xs:61: warning: cast to pointer from integer of different size
MCrypt.xs: In function 'XS_MCrypt__mcrypt_ecb':
MCrypt.xs:92: warning: cast to pointer from integer of different size
MCrypt.xs: In function 'XS_MCrypt__mcrypt_ofb':
MCrypt.xs:131: warning: cast to pointer from integer of different size
MCrypt.xs: In function 'XS_MCrypt__mcrypt_cfb':
MCrypt.xs:170: warning: cast to pointer from integer of different size
MCrypt.xs: In function 'XS_MCrypt_mcrypt_get_cipher_name':
MCrypt.xs:182: warning: cast to pointer from integer of different size
Manifying blib/man3/MCrypt.3
[ERROR] [Fri Mar 21 11:35:52 2008] MAKE TEST failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) 1..14
not ok 1
Can't load 'blib/arch/auto/MCrypt/MCrypt.so' for module MCrypt: blib/arch/auto/MCrypt/MCrypt.so: undefined symbol: mcrypt_ecb at /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/DynaLoader.pm line 230.
at test.pl line 6
Compilation failed in require at test.pl line 6.
BEGIN failed--compilation aborted at test.pl line 6.
make: *** [test_dynamic] Error 2
[MSG] [Fri Mar 21 11:35:52 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPAN::YACSmoke 0.03.
--
Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
Platform:
osname=linux, osvers=2.6.22.10, archname=x86_64-linux-thread-multi-ld
uname='linux rinse 2.6.22.10 #1 smp sun oct 28 13:30:11 cst 2007 x86_64 gnulinux '
config_args='-d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g -O3 -Duse64bitint -Duse64bitall -Dprefix=/opt/perl/testers -Dd_dosuid -Dinc_version_list=none -Acccdlflags=-fPIC -Duseshrplib=true -Dcf_email=imacat@mail.imacat.idv.tw'
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=define uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-g -O3',
cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include'
ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
alignbytes=16, prototype=define
Linker and Libraries:
ld='gcc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so
gnulibc_version='2.3.6'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE'
cccdlflags=' -fPIC', lddlflags='-shared -L/usr/local/lib'
-
FAIL MCrypt-0.92 x86_64-linux-thread-multi-ld 2.6.22.10
by imacat