FAIL OpenPlugin-0.11 x86_64-linux-thread-multi-ld 2.6.22.10

This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.

--

Dear ERIC,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make install':

[MSG] [Fri Mar 21 03:25:39 2008] Trying to get 'ftp://cpan.cdpa.nsysu.edu.tw/Unix/Lang/CPAN/authors/id/E/ER/ERIC/OpenPlugin-0.11.tar.gz'
[MSG] [Fri Mar 21 03:25:43 2008] Trying to get 'ftp://cpan.cdpa.nsysu.edu.tw/Unix/Lang/CPAN/authors/id/E/ER/ERIC/CHECKSUMS'
[MSG] [Fri Mar 21 03:25:44 2008] Checksum matches for 'OpenPlugin-0.11.tar.gz'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/inc/'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/inc/ExtUtils/'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/inc/ExtUtils/AutoInstall.pm'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/inc/File/'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/inc/File/NCopy.pm'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/OpenPlugin/'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/OpenPlugin/Authenticate.pm'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/OpenPlugin/HttpHeader/'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/OpenPlugin/HttpHeader/Apache.pm'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/OpenPlugin/HttpHeader/Apache2.pm'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/OpenPlugin/HttpHeader/CGI.pm'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/OpenPlugin/Upload.pm'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/OpenPlugin/Exception.pm'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/OpenPlugin/Config/'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/OpenPlugin/Config/Perl.pm'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/OpenPlugin/Config/Conf.pm'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/OpenPlugin/Config/Template.pm'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/OpenPlugin/Config/XML.pm'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/OpenPlugin/Config/Ini.pm'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/OpenPlugin/HttpHeader.pm'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/OpenPlugin/Session.pm'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/OpenPlugin/Datasource.pm'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/OpenPlugin/Request/'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/OpenPlugin/Request/Apache2.pm'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/OpenPlugin/Request/Apache.pm'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/OpenPlugin/Request/CGI.pm'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/OpenPlugin/Plugin.pm'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/OpenPlugin/Upload/'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/OpenPlugin/Upload/CGI.pm'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/OpenPlugin/Upload/Apache.pm'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/OpenPlugin/Upload/Apache2.pm'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/OpenPlugin/Session/'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/OpenPlugin/Session/ApacheSession.pm'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/OpenPlugin/Datasource/'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/OpenPlugin/Datasource/LDAP.pm'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/OpenPlugin/Datasource/DBI.pm'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/OpenPlugin/Datasource/Template.pm'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/OpenPlugin/Param/'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/OpenPlugin/Param/Apache2.pm'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/OpenPlugin/Param/Apache.pm'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/OpenPlugin/Param/CGI.pm'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/OpenPlugin/Authenticate/'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/OpenPlugin/Authenticate/SMB.pm'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/OpenPlugin/Authenticate/PAM.pm'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/OpenPlugin/Authenticate/DBI.pm'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/OpenPlugin/Authenticate/Template.pm'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/OpenPlugin/Config.pm'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/OpenPlugin/Cookie/'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/OpenPlugin/Cookie/CGI.pm'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/OpenPlugin/Cookie/Apache2.pm'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/OpenPlugin/Cookie/Apache.pm'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/OpenPlugin/Cache.pm'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/OpenPlugin/Log.pm'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/OpenPlugin/Cookie.pm'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/OpenPlugin/Utility.pm'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/OpenPlugin/Param.pm'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/OpenPlugin/Cache/'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/OpenPlugin/Cache/File.pm'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/OpenPlugin/Request.pm'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/OpenPlugin/Log/'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/OpenPlugin/Log/Log4perl.pm'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/OpenPlugin/Application.pm'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/OpenPlugin/Exception/'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/OpenPlugin/Exception/Template.pm'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/t/'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/t/request_apache2.t'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/t/OpenPluginTests.pm'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/t/cache_file.t'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/t/03_log.t'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/t/request_cgi.t'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/t/02_config.conf'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/t/02_config.t'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/t/01_require.t'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/t/request_apache.t'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/t/session_apachesession.t'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/t/04_exception.t'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/MANIFEST'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/conf/'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/conf/OpenPlugin.conf'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/conf/OpenPlugin-drivermap.conf'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/eg/'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/eg/error.pl'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/eg/log.pl'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/eg/session.pl'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/eg/cookie.pl'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/eg/headers.pl'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/Changelog'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/README'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/MANIFEST.SKIP'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/OpenPlugin.pm'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/INSTALL'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin-0.11/Makefile.PL'
[MSG] [Fri Mar 21 03:25:44 2008] Extracted 'OpenPlugin' to '/opt/perl/testers/.cpanplus/5.8.8/build/OpenPlugin-0.11'
[MSG] [Fri Mar 21 03:25:45 2008] 












 OpenPlugin Driver Installation Screen

  I detected dependencies for (4) drivers already installed on your system.
  You may now choose additional drivers to install.

------------------------------------------------------------------------------
Plugin       | Available Drivers            | Install
------------------------------------------------------------------------------
Authenticate   PAM SMB
Cache                                          File
Config         XML                             Conf
Datasource     LDAP                            DBI
Log            ApacheLog DBI Email Jabber
Request        Apache Apache2
Session                                        ApacheSession

[a]dd, [r]emove, [A]dd All, [R]emove All, [d]one: [d] d

Done.

*** ExtUtils::AutoInstall version 0.42
*** Checking for dependencies...
[Core Features]
- Class::Factory      ...failed! (needs 1.0)
- Digest::MD5         ...loaded. (2.36 >= 2.16)
- MD5                 ...failed! (needed)
- Test::Harness       ...loaded. (3.10 >= 2.0)
- Test::More          ...loaded. (0.78 >= 0.47)
- Error               ...failed! (needed)
- Storable            ...loaded. (2.18 >= 1.011)
- Devel::StackTrace   ...failed! (needed)
- Time::HiRes         ...loaded. (1.9712 >= 1.20)
- Archive::Tar        ...loaded. (1.38 >= 0.23)
- Attribute::Handlers ...loaded. (0.78_02)
- Params::Validate    ...failed! (needed)
- XML::DOM            ...failed! (needs 1.29)
- Log::Dispatch       ...failed! (needs 2.00)
- Log::Log4perl       ...failed! (needs 0.25)
- HTML::Template      ...failed! (needed)
- CGI::Application    ...failed! (needs 2.6)
- Digest::SHA1        ...failed! (needs 2.02)
- Cache::Cache        ...failed! (needed)
- Config::General     ...failed! (needed)
- DBI                 ...failed! (needed)
- MIME::Base64        ...loaded. (3.07)
- DB_File             ...loaded. (1.816)
- Apache::Session     ...failed! (needs 1.54)
==> Do you wish to install the 15 mandatory module(s)? [Y/n] y
*** Dependencies will be installed the next time you type 'make'.
*** ExtUtils::AutoInstall configuration finished.

Can I install your data files now? [Y/n] Y/n


Where would you like to put the OpenPlugin
configuration files?
 [/usr/local/etc] /usr/local/etc
OpenPlugin config files are now in /usr/local/etc
Checking if your kit is complete...
Looks good
Writing Makefile for OpenPlugin

[MSG] [Fri Mar 21 03:25:45 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Fri Mar 21 03:32:20 2008] cp OpenPlugin/Authenticate.pm blib/lib/OpenPlugin/Authenticate.pm
cp OpenPlugin/HttpHeader/Apache.pm blib/lib/OpenPlugin/HttpHeader/Apache.pm
cp OpenPlugin/Upload.pm blib/lib/OpenPlugin/Upload.pm
cp OpenPlugin/Utility.pm blib/lib/OpenPlugin/Utility.pm
cp OpenPlugin/Cookie.pm blib/lib/OpenPlugin/Cookie.pm
cp OpenPlugin/Exception.pm blib/lib/OpenPlugin/Exception.pm
cp OpenPlugin/Config/Perl.pm blib/lib/OpenPlugin/Config/Perl.pm
cp OpenPlugin/HttpHeader.pm blib/lib/OpenPlugin/HttpHeader.pm
cp OpenPlugin/Session.pm blib/lib/OpenPlugin/Session.pm
cp OpenPlugin/Datasource.pm blib/lib/OpenPlugin/Datasource.pm
cp OpenPlugin/Request/Apache2.pm blib/lib/OpenPlugin/Request/Apache2.pm
cp OpenPlugin/Plugin.pm blib/lib/OpenPlugin/Plugin.pm
cp OpenPlugin/Config/Template.pm blib/lib/OpenPlugin/Config/Template.pm
cp OpenPlugin/Config/Conf.pm blib/lib/OpenPlugin/Config/Conf.pm
cp OpenPlugin/Param.pm blib/lib/OpenPlugin/Param.pm
cp OpenPlugin/Cache/File.pm blib/lib/OpenPlugin/Cache/File.pm
cp OpenPlugin/Param/Apache.pm blib/lib/OpenPlugin/Param/Apache.pm
cp OpenPlugin/Request.pm blib/lib/OpenPlugin/Request.pm
cp OpenPlugin/Session/ApacheSession.pm blib/lib/OpenPlugin/Session/ApacheSession.pm
cp OpenPlugin/Upload/CGI.pm blib/lib/OpenPlugin/Upload/CGI.pm
cp OpenPlugin/Param/CGI.pm blib/lib/OpenPlugin/Param/CGI.pm
cp OpenPlugin/Datasource/LDAP.pm blib/lib/OpenPlugin/Datasource/LDAP.pm
cp OpenPlugin/Authenticate/DBI.pm blib/lib/OpenPlugin/Authenticate/DBI.pm
cp OpenPlugin/Config/XML.pm blib/lib/OpenPlugin/Config/XML.pm
cp OpenPlugin/Param/Apache2.pm blib/lib/OpenPlugin/Param/Apache2.pm
cp OpenPlugin/Cookie/Apache.pm blib/lib/OpenPlugin/Cookie/Apache.pm
cp OpenPlugin/Upload/Apache.pm blib/lib/OpenPlugin/Upload/Apache.pm
cp OpenPlugin/Authenticate/SMB.pm blib/lib/OpenPlugin/Authenticate/SMB.pm
cp OpenPlugin/Config.pm blib/lib/OpenPlugin/Config.pm
cp OpenPlugin/Request/Apache.pm blib/lib/OpenPlugin/Request/Apache.pm
cp OpenPlugin/Log/Log4perl.pm blib/lib/OpenPlugin/Log/Log4perl.pm
cp OpenPlugin/Cookie/CGI.pm blib/lib/OpenPlugin/Cookie/CGI.pm
cp OpenPlugin/Application.pm blib/lib/OpenPlugin/Application.pm
cp OpenPlugin/Exception/Template.pm blib/lib/OpenPlugin/Exception/Template.pm
cp OpenPlugin/Upload/Apache2.pm blib/lib/OpenPlugin/Upload/Apache2.pm
cp OpenPlugin/HttpHeader/CGI.pm blib/lib/OpenPlugin/HttpHeader/CGI.pm
cp OpenPlugin/Datasource/DBI.pm blib/lib/OpenPlugin/Datasource/DBI.pm
cp OpenPlugin/Datasource/Template.pm blib/lib/OpenPlugin/Datasource/Template.pm
cp OpenPlugin/Authenticate/Template.pm blib/lib/OpenPlugin/Authenticate/Template.pm
cp OpenPlugin/Cookie/Apache2.pm blib/lib/OpenPlugin/Cookie/Apache2.pm
cp OpenPlugin/HttpHeader/Apache2.pm blib/lib/OpenPlugin/HttpHeader/Apache2.pm
cp OpenPlugin/Authenticate/PAM.pm blib/lib/OpenPlugin/Authenticate/PAM.pm
cp OpenPlugin/Config/Ini.pm blib/lib/OpenPlugin/Config/Ini.pm
cp OpenPlugin/Request/CGI.pm blib/lib/OpenPlugin/Request/CGI.pm
cp OpenPlugin/Cache.pm blib/lib/OpenPlugin/Cache.pm
cp OpenPlugin.pm blib/lib/OpenPlugin.pm
cp OpenPlugin/Log.pm blib/lib/OpenPlugin/Log.pm
*** Installing dependencies...
[MSG] No '/home/imacat/.cpanplus/custom-sources' dir, skipping custom sources
*** Installing Class::Factory...
==> MISSING Signature file! <==
Running [/opt/perl/testers/bin/perl /opt/perl/testers/bin/cpanp-run-perl /home/imacat/.cpanplus/5.8.8/build/Class-Factory-1.06/Makefile.PL ]...
Checking if your kit is complete...
Looks good
Writing Makefile for Class::Factory
Running [/usr/bin/make test -j 2]...
make[1]: warning: -jN forced in submake: disabling jobserver mode.
t/factory......ok
All tests successful.
Files=1, Tests=39,  0 wallclock secs ( 0.01 usr  0.00 sys +  0.05 cusr  0.00 csys =  0.06 CPU)
Result: PASS
[ERROR] MAKE INSTALL failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) make[1]: warning: -jN forced in submake: disabling jobserver mode.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ERROR: Can't create '/opt/perl/testers/lib/site_perl/5.8.8/Class'
mkdir /opt/perl/testers/lib/site_perl/5.8.8/Class: ©Úµ´¤£²ÅÅv­­ªº¾Þ§@ at /opt/perl/testers/lib/5.8.8/ExtUtils/Install.pm line 450

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 at -e line 1
Appending installation info to /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/perllocal.pod
make[1]: *** [pure_site_install] Error 13
make[1]: *** Waiting for unfinished jobs....
/bin/sh: /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/perllocal.pod: ©Úµ´¤£²ÅÅv­­ªº¾Þ§@


Key 'ok' () is of invalid type for 'CPANPLUS::Backend::RV::new' provided by CPANPLUS::Backend::__ANON__ at /opt/perl/testers/lib/site_perl/5.8.8/CPANPLUS/Backend.pm line 395
*** Class::Factory installation cancelled.
*** Installing MD5...
==> MISSING Signature file! <==
Running [/opt/perl/testers/bin/perl /opt/perl/testers/bin/cpanp-run-perl /home/imacat/.cpanplus/5.8.8/build/MD5-2.03/Makefile.PL ]...
Checking if your kit is complete...
Looks good
Writing Makefile for MD5
Running [/usr/bin/make test -j 2]...
make[1]: warning: -jN forced in submake: disabling jobserver mode.
t/md5......ok
All tests successful.
Files=1, Tests=14,  0 wallclock secs ( 0.02 usr  0.00 sys +  0.01 cusr  0.01 csys =  0.04 CPU)
Result: PASS
[ERROR] MAKE INSTALL failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) make[1]: warning: -jN forced in submake: disabling jobserver mode.
Appending installation info to /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/perllocal.pod
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ERROR: Can't create '/opt/perl/testers/lib/site_perl/5.8.8'
Do not have write permissions on '/opt/perl/testers/lib/site_perl/5.8.8'
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 at -e line 1
make[1]: *** [pure_site_install] Error 13
make[1]: *** Waiting for unfinished jobs....
/bin/sh: /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/perllocal.pod: ©Úµ´¤£²ÅÅv­­ªº¾Þ§@


Key 'ok' () is of invalid type for 'CPANPLUS::Backend::RV::new' provided by CPANPLUS::Backend::__ANON__ at /opt/perl/testers/lib/site_perl/5.8.8/CPANPLUS/Backend.pm line 395
*** MD5 installation cancelled.
*** Installing Error...
==> MISSING Signature file! <==
Running [/opt/perl/testers/bin/perl /opt/perl/testers/bin/cpanp-run-perl /home/imacat/.cpanplus/5.8.8/build/Error-0.17012/Makefile.PL ]...
Checking if your kit is complete...
Looks good
Writing Makefile for Error
Running [/usr/bin/make test -j 2]...
make[1]: warning: -jN forced in submake: disabling jobserver mode.
t/01throw..............................ok
t/02order..............................ok
t/03throw-non-Error....................ok
t/04use-base-Error-Simple..............ok
t/05text-errors-with-file-handles......ok
t/06customize-text-throw...............ok
t/07try-in-obj-destructor..............ok
t/08warndie............................ok
t/09dollar-at..........................ok
t/10throw-in-catch.....................ok
t/11rethrow............................ok
t/12wrong-error-var....................ok
t/13except-arg0........................ok
t/pod-coverage.........................skipped: Test::Pod::Coverage 1.04 required for testing POD coverage
t/pod..................................ok
All tests successful.
Files=15, Tests=62,  1 wallclock secs ( 0.09 usr  0.01 sys +  0.65 cusr  0.09 csys =  0.84 CPU)
Result: PASS
[ERROR] MAKE INSTALL failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) make[1]: warning: -jN forced in submake: disabling jobserver mode.
Appending installation info to /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/perllocal.pod
/bin/sh: /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/perllocal.pod: ©Úµ´¤£²ÅÅv­­ªº¾Þ§@
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ERROR: Can't create '/opt/perl/testers/lib/site_perl/5.8.8'
Do not have write permissions on '/opt/perl/testers/lib/site_perl/5.8.8'
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 at -e line 1
make[1]: *** [pure_site_install] Error 13
make[1]: *** Waiting for unfinished jobs....


Key 'ok' () is of invalid type for 'CPANPLUS::Backend::RV::new' provided by CPANPLUS::Backend::__ANON__ at /opt/perl/testers/lib/site_perl/5.8.8/CPANPLUS/Backend.pm line 395
*** Error installation cancelled.
*** Installing Devel::StackTrace...
WARNING: This key is not certified with a trusted signature!
Primary key fingerprint: 6E6F 1E40 8E80 6724 C116  8028 DCEA F767 342E 89F3
Running [/opt/perl/testers/bin/perl /opt/perl/testers/bin/cpanp-run-perl /home/imacat/.cpanplus/5.8.8/build/Devel-StackTrace-1.16/Makefile.PL ]...
Checking if your kit is complete...
Looks good
Writing Makefile for Devel::StackTrace
Running [/usr/bin/make test -j 2]...
make[1]: warning: -jN forced in submake: disabling jobserver mode.
t/01-basic..........ok
t/kwalitee..........skipped: This test is only run for the module author
t/pod-coverage......skipped: This test is only run for the module author
t/pod...............skipped: This test is only run for the module author
All tests successful.
Files=4, Tests=34,  0 wallclock secs ( 0.03 usr  0.03 sys +  0.11 cusr  0.01 csys =  0.18 CPU)
Result: PASS
[ERROR] MAKE INSTALL failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) make[1]: warning: -jN forced in submake: disabling jobserver mode.
Appending installation info to /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/perllocal.pod
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ERROR: Can't create '/opt/perl/testers/lib/site_perl/5.8.8/Devel'
Do not have write permissions on '/opt/perl/testers/lib/site_perl/5.8.8/Devel'
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 at -e line 1
make[1]: *** [pure_site_install] Error 13
make[1]: *** Waiting for unfinished jobs....
/bin/sh: /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/perllocal.pod: ©Úµ´¤£²ÅÅv­­ªº¾Þ§@


Key 'ok' () is of invalid type for 'CPANPLUS::Backend::RV::new' provided by CPANPLUS::Backend::__ANON__ at /opt/perl/testers/lib/site_perl/5.8.8/CPANPLUS/Backend.pm line 395
*** Devel::StackTrace installation cancelled.
*** Installing Params::Validate...
==> MISSING Signature file! <==
Running [/opt/perl/testers/bin/perl /opt/perl/testers/bin/cpanp-run-perl /home/imacat/.cpanplus/5.8.8/build/Params-Validate-0.89/Makefile.PL ]...
Testing if you have a C compiler
Checking if your kit is complete...
Looks good
Writing Makefile for Params::Validate
Running [/usr/bin/make test -j 2]...
make[1]: warning: -jN forced in submake: disabling jobserver mode.
t/01-validate..............ok
t/02-noop..................ok
t/03-attribute.............ok
t/04-defaults..............ok
t/05-noop_default..........ok
t/06-options...............ok
t/07-with..................ok
t/08-noop_with.............ok
t/09-regex.................ok
t/10-noop_regex............ok
t/11-cb....................ok
t/12-noop_cb...............ok
t/13-taint.................ok
t/14-no_validate...........ok
t/15-case..................ok
t/16-normalize.............ok
t/17-callbacks.............ok
t/18-depends...............ok
t/19-untaint...............skipped: These tests require Test::Taint 0.02+ to run
t/21-can...................ok
t/22-overload-can-bug......ok
t/23-readonly..............skipped: Need Readonly::XS and Readonly for this test
t/24-tied..................ok
t/25-undef-regex...........ok
t/26-isa...................ok
t/27-string-as-type........ok
t/pod-coverage.............skipped: This test is only run for the module author
t/pod......................skipped: This test is only run for the module author
All tests successful.
Files=28, Tests=486,  3 wallclock secs ( 0.14 usr  0.03 sys +  1.53 cusr  0.20 csys =  1.90 CPU)
Result: PASS
[ERROR] MAKE INSTALL failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) make[1]: warning: -jN forced in submake: disabling jobserver mode.
Appending installation info to /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/perllocal.pod
/bin/sh: /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/perllocal.pod: ©Úµ´¤£²ÅÅv­­ªº¾Þ§@
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ERROR: Can't create '/opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld/Attribute/Params'
mkdir /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld/Attribute: ©Úµ´¤£²ÅÅv­­ªº¾Þ§@ at /opt/perl/testers/lib/5.8.8/ExtUtils/Install.pm line 450

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 at -e line 1
make[1]: *** [pure_site_install] Error 13
make[1]: *** Waiting for unfinished jobs....


Key 'ok' () is of invalid type for 'CPANPLUS::Backend::RV::new' provided by CPANPLUS::Backend::__ANON__ at /opt/perl/testers/lib/site_perl/5.8.8/CPANPLUS/Backend.pm line 395
*** Params::Validate installation cancelled.
*** Installing XML::DOM...
==> MISSING Signature file! <==
Running [/opt/perl/testers/bin/perl /opt/perl/testers/bin/cpanp-run-perl /home/imacat/.cpanplus/5.8.8/build/XML-DOM-1.44/Makefile.PL ]...
Checking if your kit is complete...
Looks good
Warning: prerequisite XML::Parser 2.30 not found.
Warning: prerequisite XML::Parser::PerlSAX 0.07 not found.
Warning: prerequisite XML::RegExp 0 not found.
Writing Makefile for XML-DOM
==> MISSING Signature file! <==
Running [/opt/perl/testers/bin/perl /opt/perl/testers/bin/cpanp-run-perl /home/imacat/.cpanplus/5.8.8/build/XML-Parser-2.36/Makefile.PL ]...
Checking if your kit is complete...
Looks good
Writing Makefile for XML::Parser::Expat
Writing Makefile for XML::Parser
Running [/usr/bin/make test -j 2]...
make[1]: warning: -jN forced in submake: disabling jobserver mode.
t/astress...........ok
t/cdata.............ok
t/decl..............ok
t/defaulted.........ok
t/encoding..........ok
t/external_ent......ok
t/file..............ok
t/finish............ok
t/namespaces........ok
t/parament..........ok
t/partial...........ok
t/skip..............ok
t/stream............ok
t/styles............ok
All tests successful.
Files=14, Tests=130,  1 wallclock secs ( 0.06 usr  0.01 sys +  0.65 cusr  0.13 csys =  0.85 CPU)
Result: PASS
[ERROR] MAKE INSTALL failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) make[1]: warning: -jN forced in submake: disabling jobserver mode.
Appending installation info to /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/perllocal.pod
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
/bin/sh: /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/perllocal.pod: ©Úµ´¤£²ÅÅv­­ªº¾Þ§@
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ERROR: Can't create '/opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld/XML'
mkdir /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld/XML: ©Úµ´¤£²ÅÅv­­ªº¾Þ§@ at /opt/perl/testers/lib/5.8.8/ExtUtils/Install.pm line 450

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 at -e line 1
make[1]: *** [pure_site_install] Error 13
make[1]: *** Waiting for unfinished jobs....


[ERROR] Failed to install 'XML::Parser' as prerequisite for 'XML::DOM'

[ERROR] Unable to satisfy prerequisites for 'XML::DOM' -- aborting install

[ERROR] Unable to create a new distribution object for 'XML::DOM' -- cannot continue

Key 'ok' () is of invalid type for 'CPANPLUS::Backend::RV::new' provided by CPANPLUS::Backend::__ANON__ at /opt/perl/testers/lib/site_perl/5.8.8/CPANPLUS/Backend.pm line 395
*** XML::DOM installation cancelled.
*** Installing Log::Dispatch...
WARNING: This key is not certified with a trusted signature!
Primary key fingerprint: 6E6F 1E40 8E80 6724 C116  8028 DCEA F767 342E 89F3
Running [/opt/perl/testers/bin/perl /opt/perl/testers/bin/cpanp-run-perl /home/imacat/.cpanplus/5.8.8/build/Log-Dispatch-2.21/Makefile.PL ]...
Checking if your kit is complete...
Looks good
Warning: prerequisite Module::Build 0 not found.
Warning: prerequisite Params::Validate 0.15 not found.
Writing Makefile for Log::Dispatch
WARNING: This key is not certified with a trusted signature!
Primary key fingerprint: ADCB DB05 B40E B2A2 A555  5462 82BB CC04 B7EF 9476
Running [/opt/perl/testers/bin/perl /opt/perl/testers/bin/cpanp-run-perl /home/imacat/.cpanplus/5.8.8/build/Module-Build-0.2808/Makefile.PL ]...
# running Build.PL 
/opt/perl/testers/bin/perl Build.PL
 * Optional prerequisite ExtUtils::ParseXS is not installed
 * Optional prerequisite Pod::Readme is not installed
 * Optional prerequisite ExtUtils::CBuilder is not installed

ERRORS/WARNINGS FOUND IN PREREQUISITES.  You may wish to install the versions
of the modules indicated above before proceeding with this installation

    - ExtUtils::CBuilder is not installed
    * Optional prerequisite ExtUtils::ParseXS is not installed

Checking whether your kit is complete...
Looks good

Checking prerequisites...
Checking features:
  manpage_support....enabled
  YAML_support.......enabled
  C_support..........disabled
  HTML_support.......enabled
Creating new 'Build' script for 'Module-Build' version '0.2808'
Running [/usr/bin/make test -j 2]...
make[1]: warning: -jN forced in submake: disabling jobserver mode.
t/basic.................ok
t/compat................ok
t/destinations..........ok
t/ext...................ok
t/extend................ok
t/files.................ok
t/help..................ok
t/install...............ok
t/manifypods............ok
t/mbyaml................ok
t/metadata..............ok
t/metadata2.............ok
t/moduleinfo............ok
t/new_from_context......ok
t/notes.................ok
t/par...................skipped: C_support not enabled
t/parents...............ok
t/pod_parser............ok
t/ppm...................skipped: C_support not enabled
t/runthrough............ok
t/signature.............skipped: $ENV{TEST_SIGNATURE} is not set
t/test_type.............ok
t/test_types............ok
t/tilde.................ok
t/versions..............ok
t/xs....................skipped: C_support not enabled
All tests successful.
Files=26, Tests=750, 25 wallclock secs ( 0.31 usr  0.03 sys + 17.76 cusr  4.01 csys = 22.11 CPU)
Result: PASS
[ERROR] MAKE INSTALL failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) make[1]: warning: -jN forced in submake: disabling jobserver mode.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ERROR: Can't create '/opt/perl/testers/bin'
Do not have write permissions on '/opt/perl/testers/bin'
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 at lib/Module/Build/Base.pm line 2788
make[1]: *** [install] Error 13


[ERROR] Failed to install 'Module::Build' as prerequisite for 'Log::Dispatch'

[ERROR] Unable to satisfy prerequisites for 'Log::Dispatch' -- aborting install

[ERROR] Unable to create a new distribution object for 'Log::Dispatch' -- cannot continue

Key 'ok' () is of invalid type for 'CPANPLUS::Backend::RV::new' provided by CPANPLUS::Backend::__ANON__ at /opt/perl/testers/lib/site_perl/5.8.8/CPANPLUS/Backend.pm line 395
*** Log::Dispatch installation cancelled.
*** Installing Log::Log4perl...
==> MISSING Signature file! <==
Running [/opt/perl/testers/bin/perl /opt/perl/testers/bin/cpanp-run-perl /home/imacat/.cpanplus/5.8.8/build/Log-Log4perl-1.15/Makefile.PL ]...
Checking if your kit is complete...
Looks good
Writing Makefile for Log::Log4perl
Running [/usr/bin/make test -j 2]...
make[1]: warning: -jN forced in submake: disabling jobserver mode.
t/001Level.............ok
t/002Logger............ok
t/003Layout............ok
t/004Config............ok
t/005Config-Perl.......ok
t/006Config-Java.......skipped: only with Log::Dispatch
t/007LogPrio...........ok
t/008ConfCat...........ok
t/009Deuce.............ok
t/010JConsole..........skipped: only with Log::Dispatch
t/011JFile.............skipped: only with Log::Dispatch
t/012Deeper............skipped: only with Log::Dispatch
t/013Bench.............ok
t/014ConfErrs..........ok
t/015fltmsg............ok
t/016Export............ok
t/017Watch.............ok
t/018Init..............ok
t/019Warn..............ok
t/020Easy..............ok
t/020Easy2.............ok
t/021AppThres..........ok
t/022Wrap..............ok
t/023Date..............ok
t/024WarnDieCarp.......ok
t/025CustLevels........ok
t/026FileApp...........ok
t/027Watch2............ok
t/027Watch3............ok
t/028Additivity........ok
t/029SysWide...........ok
t/030LDLevel...........ok
t/031NDC...............ok
t/032JRollFile.........skipped: only with Log::Dispatch::FileRotate 1.10
t/033UsrCspec..........ok
t/034DBI...............skipped: DBD::CSV or SQL::Statement 1.005 not installed, skipping tests
t/035JDBCAppender......skipped: only with Log::Dispatch and DBD::CSV
t/036JSyslog...........ok
t/037JWin32Event.......skipped: only with Log::Dispatch::Win32EventLog
t/038XML-DOM1..........skipped: only with XML::DOM > 1.29
t/039XML-DOM2..........skipped: only with XML::DOM > 1.29
t/040Filter............ok
t/041SafeEval..........ok
t/042SyncApp...........skipped: - only with L4P_ALL_TESTS
t/043VarSubst..........ok
t/044XML-Filter........skipped: only with XML::DOM > 1.29
t/045Composite.........ok
t/046RRDs..............skipped: (RRDs not installed)
t/048lwp...............ok
t/049Unhide............ok
t/050Buffer............ok
t/051Extra.............ok
t/052Utf8..............ok
t/053Resurrect.........ok
t/054Subclass..........ok
All tests successful.
Files=55, Tests=591, 25 wallclock secs ( 0.30 usr  0.06 sys +  5.25 cusr  0.56 csys =  6.17 CPU)
Result: PASS
[ERROR] MAKE INSTALL failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) make[1]: warning: -jN forced in submake: disabling jobserver mode.
Appending installation info to /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/perllocal.pod
/bin/sh: /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/perllocal.pod: ©Úµ´¤£²ÅÅv­­ªº¾Þ§@
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ERROR: Can't create '/opt/perl/testers/lib/site_perl/5.8.8/Log'
Do not have write permissions on '/opt/perl/testers/lib/site_perl/5.8.8/Log'
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 at -e line 1
make[1]: *** [pure_site_install] Error 13


Key 'ok' () is of invalid type for 'CPANPLUS::Backend::RV::new' provided by CPANPLUS::Backend::__ANON__ at /opt/perl/testers/lib/site_perl/5.8.8/CPANPLUS/Backend.pm line 395
*** Log::Log4perl installation cancelled.
*** Installing HTML::Template...
==> MISSING Signature file! <==
Running [/opt/perl/testers/bin/perl /opt/perl/testers/bin/cpanp-run-perl /home/imacat/.cpanplus/5.8.8/build/HTML-Template-2.9/Makefile.PL ]...
Checking if your kit is complete...
Looks good
Writing Makefile for HTML::Template
Running [/usr/bin/make test -j 2]...
make[1]: warning: -jN forced in submake: disabling jobserver mode.
t/01-bad-args................ok
t/01coderefs.................ok
t/02-parse...................ok
t/02random...................ok
t/03-associate...............ok
t/03else_else_bug............ok
t/04-type-source.............ok
t/04default_escape...........ok
t/04default_with_escape......ok
t/04no_taintmode.............ok
t/05-blind-cache.............ok
t/05force_untaint............ok
t/05nested_global............ok
t/06-file-cache-dir..........ok
t/07-double-file-cache.......ok
t/08-cache-debug.............ok
t/09-caching-precluded.......ok
t/10-param...................ok
t/11-non-file-templates......ok
t/99-old-test-pl.............ok
All tests successful.
Files=20, Tests=457,  3 wallclock secs ( 0.13 usr  0.02 sys +  1.48 cusr  0.18 csys =  1.81 CPU)
Result: PASS
[ERROR] MAKE INSTALL failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) make[1]: warning: -jN forced in submake: disabling jobserver mode.
Appending installation info to /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/perllocal.pod
/bin/sh: /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/perllocal.pod: ©Úµ´¤£²ÅÅv­­ªº¾Þ§@
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ERROR: Can't create '/opt/perl/testers/lib/site_perl/5.8.8/HTML'
Do not have write permissions on '/opt/perl/testers/lib/site_perl/5.8.8/HTML'
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 at -e line 1
make[1]: *** [pure_site_install] Error 13
make[1]: *** Waiting for unfinished jobs....


Key 'ok' () is of invalid type for 'CPANPLUS::Backend::RV::new' provided by CPANPLUS::Backend::__ANON__ at /opt/perl/testers/lib/site_perl/5.8.8/CPANPLUS/Backend.pm line 395
*** HTML::Template installation cancelled.
*** Installing CGI::Application...
==> MISSING Signature file! <==
Running [/opt/perl/testers/bin/perl /opt/perl/testers/bin/cpanp-run-perl /home/imacat/.cpanplus/5.8.8/build/CGI-Application-4.06/Makefile.PL ]...
Checking if your kit is complete...
Looks good
Warning: prerequisite HTML::Template 0 not found.
Writing Makefile for CGI::Application
[ERROR] Prerequisite 'HTML::Template' failed to install before in this session

[ERROR] Unable to satisfy prerequisites for 'CGI::Application' -- aborting install

[ERROR] Unable to create a new distribution object for 'CGI::Application' -- cannot continue

Key 'ok' () is of invalid type for 'CPANPLUS::Backend::RV::new' provided by CPANPLUS::Backend::__ANON__ at /opt/perl/testers/lib/site_perl/5.8.8/CPANPLUS/Backend.pm line 395
*** CGI::Application installation cancelled.
*** Installing Digest::SHA1...
==> MISSING Signature file! <==
Running [/opt/perl/testers/bin/perl /opt/perl/testers/bin/cpanp-run-perl /home/imacat/.cpanplus/5.8.8/build/Digest-SHA1-2.11/Makefile.PL ]...
Checking if your kit is complete...
Looks good
Writing Makefile for Digest::SHA1
Running [/usr/bin/make test -j 2]...
make[1]: warning: -jN forced in submake: disabling jobserver mode.
t/badfile......ok
t/bits.........ok
t/sha1.........ok
All tests successful.
Files=3, Tests=17,  1 wallclock secs ( 0.02 usr  0.01 sys +  0.04 cusr  0.02 csys =  0.09 CPU)
Result: PASS
[ERROR] MAKE INSTALL failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) make[1]: warning: -jN forced in submake: disabling jobserver mode.
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ERROR: Can't create '/opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld/Digest'
Do not have write permissions on '/opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld/Digest'
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 at -e line 1
Appending installation info to /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/perllocal.pod
make[1]: *** [pure_site_install] Error 13
make[1]: *** Waiting for unfinished jobs....
/bin/sh: /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/perllocal.pod: ©Úµ´¤£²ÅÅv­­ªº¾Þ§@


Key 'ok' () is of invalid type for 'CPANPLUS::Backend::RV::new' provided by CPANPLUS::Backend::__ANON__ at /opt/perl/testers/lib/site_perl/5.8.8/CPANPLUS/Backend.pm line 395
*** Digest::SHA1 installation cancelled.
*** Installing Cache::Cache...
==> MISSING Signature file! <==
Running [/opt/perl/testers/bin/perl /opt/perl/testers/bin/cpanp-run-perl /home/imacat/.cpanplus/5.8.8/build/Cache-Cache-1.05/Makefile.PL ]...
Checking for IPC::ShareLite... not found

  NOTE: Your system does not seem to have IPC::ShareLite installed.
  This module is a prerequisite for the SharedMemoryCache
  implementations.  However, since it is not available on all
  platforms, the Cache::Cache module does not list it as an explicit
  dependency.  If you are able to build IPC::ShareLite (available on
  CPAN), please install it now and re run this Makefile.PL.
  Automatically disabling the tests for the SharedMemoryCache.

Checking if your kit is complete...
Looks good
Warning: prerequisite Digest::SHA1 2.02 not found.
Warning: prerequisite Error 0.15 not found.
Writing Makefile for Cache::Cache
------------------------------------------------------------------
Please be patient while running "make test" as the full test suite
takes roughly two minutes to complete.
------------------------------------------------------------------
[ERROR] Prerequisite 'Digest::SHA1' failed to install before in this session

[ERROR] Unable to satisfy prerequisites for 'Cache::Cache' -- aborting install

[ERROR] Unable to create a new distribution object for 'Cache::Cache' -- cannot continue

Key 'ok' () is of invalid type for 'CPANPLUS::Backend::RV::new' provided by CPANPLUS::Backend::__ANON__ at /opt/perl/testers/lib/site_perl/5.8.8/CPANPLUS/Backend.pm line 395
*** Cache::Cache installation cancelled.
*** Installing Config::General...
==> MISSING Signature file! <==
Running [/opt/perl/testers/bin/perl /opt/perl/testers/bin/cpanp-run-perl /home/imacat/.cpanplus/5.8.8/build/Config-General-2.38/Makefile.PL ]...
Checking if your kit is complete...
Looks good
Writing Makefile for Config::General
Running [/usr/bin/make test -j 2]...
make[1]: warning: -jN forced in submake: disabling jobserver mode.
t/run......# 
# Please ignore the following message about IncludeAgain
File t/included.conf already loaded.  Use -IncludeAgain to load it again.
ok
All tests successful.
Files=1, Tests=45,  0 wallclock secs ( 0.04 usr  0.00 sys +  0.12 cusr  0.02 csys =  0.18 CPU)
Result: PASS
[ERROR] MAKE INSTALL failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) make[1]: warning: -jN forced in submake: disabling jobserver mode.
Appending installation info to /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/perllocal.pod
/bin/sh: /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/perllocal.pod: ©Úµ´¤£²ÅÅv­­ªº¾Þ§@
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ERROR: Can't create '/opt/perl/testers/lib/site_perl/5.8.8/Config'
Do not have write permissions on '/opt/perl/testers/lib/site_perl/5.8.8/Config'
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 at -e line 1
make[1]: *** [pure_site_install] Error 13
make[1]: *** Waiting for unfinished jobs....


Key 'ok' () is of invalid type for 'CPANPLUS::Backend::RV::new' provided by CPANPLUS::Backend::__ANON__ at /opt/perl/testers/lib/site_perl/5.8.8/CPANPLUS/Backend.pm line 395
*** Config::General installation cancelled.
*** Installing DBI...
==> MISSING Signature file! <==
Running [/opt/perl/testers/bin/perl /opt/perl/testers/bin/cpanp-run-perl /home/imacat/.cpanplus/5.8.8/build/DBI-1.602/Makefile.PL ]...

*** You are using a perl configured with threading enabled.
*** You should be aware that using multiple threads is
*** not recommended for production environments.

*** Note:
    The optional PlRPC-modules (RPC::PlServer etc) are not installed.
    If you want to use the DBD::Proxy driver and DBI::ProxyServer
    modules, then you'll need to install the RPC::PlServer, RPC::PlClient,
    Storable and Net::Daemon modules. The CPAN Bundle::DBI may help you.
    You can install them any time after installing the DBI.
    You do *not* need these modules for typical DBI usage.

Optional modules are available from any CPAN mirror, in particular
    http://search.cpan.org/
    http://www.perl.com/CPAN/modules/by-module
    http://www.perl.org/CPAN/modules/by-module
    ftp://ftp.funet.fi/pub/languages/perl/CPAN/modules/by-module

Your perl was compiled with gcc (version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)), okay.
Creating test wrappers for DBI::PurePerl:
t/zvp_01basics.t 
t/zvp_02dbidrv.t 
t/zvp_03handle.t 
t/zvp_04mods.t 
t/zvp_05thrclone.t (use threads)
t/zvp_06attrs.t 
t/zvp_07kids.t 
t/zvp_08keeperr.t 
t/zvp_09trace.t 
t/zvp_10examp.t 
t/zvp_11fetch.t 
t/zvp_12quote.t 
t/zvp_13taint.t 
t/zvp_14utf8.t 
t/zvp_15array.t 
t/zvp_19fhtrace.t 
t/zvp_20meta.t 
t/zvp_30subclass.t 
t/zvp_40profile.t 
t/zvp_41prof_dump.t 
t/zvp_42prof_data.t 
t/zvp_43prof_env.t 
t/zvp_50dbm.t 
t/zvp_60preparse.t 
t/zvp_65transact.t 
t/zvp_70callbacks.t 
t/zvp_72childhandles.t 
t/zvp_80proxy.t 
t/zvp_85gofer.t 
t/zvp_86gofer_fail.t 
t/zvp_87gofer_cache.t 
Creating test wrappers for DBD::Gofer:
t/zvg_01basics.t 
t/zvg_02dbidrv.t 
t/zvg_03handle.t 
t/zvg_04mods.t 
t/zvg_05thrclone.t (use threads)
t/zvg_06attrs.t 
t/zvg_07kids.t 
t/zvg_08keeperr.t 
t/zvg_09trace.t 
t/zvg_10examp.t 
t/zvg_11fetch.t 
t/zvg_12quote.t 
t/zvg_13taint.t 
t/zvg_14utf8.t 
t/zvg_15array.t 
t/zvg_19fhtrace.t 
t/zvg_20meta.t 
t/zvg_30subclass.t 
t/zvg_40profile.t 
t/zvg_41prof_dump.t 
t/zvg_42prof_data.t 
t/zvg_43prof_env.t 
t/zvg_50dbm.t 
t/zvg_60preparse.t 
t/zvg_65transact.t 
t/zvg_70callbacks.t 
t/zvg_72childhandles.t 
t/zvg_80proxy.t 
t/zvg_85gofer.t 
t/zvg_86gofer_fail.t 
t/zvg_87gofer_cache.t 
Creating test wrappers for PurePerl & Gofer:
t/zvxgp_01basics.t 
t/zvxgp_02dbidrv.t 
t/zvxgp_03handle.t 
t/zvxgp_04mods.t 
t/zvxgp_05thrclone.t (use threads)
t/zvxgp_06attrs.t 
t/zvxgp_07kids.t 
t/zvxgp_08keeperr.t 
t/zvxgp_09trace.t 
t/zvxgp_10examp.t 
t/zvxgp_11fetch.t 
t/zvxgp_12quote.t 
t/zvxgp_13taint.t 
t/zvxgp_14utf8.t 
t/zvxgp_15array.t 
t/zvxgp_19fhtrace.t 
t/zvxgp_20meta.t 
t/zvxgp_30subclass.t 
t/zvxgp_40profile.t 
t/zvxgp_41prof_dump.t 
t/zvxgp_42prof_data.t 
t/zvxgp_43prof_env.t 
t/zvxgp_50dbm.t 
t/zvxgp_60preparse.t 
t/zvxgp_65transact.t 
t/zvxgp_70callbacks.t 
t/zvxgp_72childhandles.t 
t/zvxgp_80proxy.t 
t/zvxgp_85gofer.t 
t/zvxgp_86gofer_fail.t 
t/zvxgp_87gofer_cache.t 
Checking if your kit is complete...
Looks good

    I see you're using perl 5.008008 on x86_64-linux-thread-multi-ld, okay.
    Remember to actually *read* the README file!
    Use  'make' to build the software (dmake or nmake on Windows).
    Then 'make test' to execute self tests.
    Then 'make install' to install the DBI and then delete this working
    directory before unpacking and building any DBD::* drivers.

Writing Makefile for DBI
Running [/usr/bin/make test -j 2]...
make[1]: warning: -jN forced in submake: disabling jobserver mode.
t/01basics..................ok
t/02dbidrv..................ok
t/03handle..................ok
t/04mods....................ok
t/05thrclone................ok
t/06attrs...................ok
t/07kids....................ok
t/08keeperr.................ok
t/09trace...................ok
t/10examp...................ok
t/11fetch...................ok
t/12quote...................ok
t/13taint...................ok
t/14utf8....................ok
t/15array...................ok
t/19fhtrace.................ok
t/20meta....................ok
t/30subclass................ok
t/40profile.................ok
t/41prof_dump...............ok
t/42prof_data...............ok
t/43prof_env................ok
t/50dbm.....................ok
t/60preparse................ok
t/65transact................ok
t/70callbacks...............ok
t/72childhandles............ok
t/80proxy...................skipped: modules required for proxy are probably not installed (e.g., RPC/PlClient.pm)
t/85gofer...................ok
t/86gofer_fail..............ok
t/87gofer_cache.............ok
t/pod-coverage..............skipped: Test::Pod::Coverage 1.04 required for testing POD coverage
t/pod.......................ok
t/zvg_01basics..............ok
t/zvg_02dbidrv..............ok
t/zvg_03handle..............ok
t/zvg_04mods................ok
t/zvg_05thrclone............ok
t/zvg_06attrs...............ok
t/zvg_07kids................ok
t/zvg_08keeperr.............ok
t/zvg_09trace...............ok
t/zvg_10examp...............ok
t/zvg_11fetch...............ok
t/zvg_12quote...............ok
t/zvg_13taint...............skipped: Taint attribute tests not functional with DBI_AUTOPROXY
t/zvg_14utf8................ok
t/zvg_15array...............ok
t/zvg_19fhtrace.............ok
t/zvg_20meta................ok
t/zvg_30subclass............ok
t/zvg_40profile.............ok
t/zvg_41prof_dump...........ok
t/zvg_42prof_data...........ok
t/zvg_43prof_env............ok
t/zvg_50dbm.................ok
t/zvg_60preparse............ok
t/zvg_65transact............skipped: Transactions not supported by DBD::Gofer
t/zvg_70callbacks...........ok
t/zvg_72childhandles........ok
t/zvg_80proxy...............skipped: modules required for proxy are probably not installed (e.g., RPC/PlClient.pm)
t/zvg_85gofer...............ok
t/zvg_86gofer_fail..........skipped: Gofer DBI_AUTOPROXY
t/zvg_87gofer_cache.........skipped: Gofer DBI_AUTOPROXY
t/zvp_01basics..............ok
t/zvp_02dbidrv..............ok
t/zvp_03handle..............ok
t/zvp_04mods................ok
t/zvp_05thrclone............ok
t/zvp_06attrs...............ok
t/zvp_07kids................skipped: $h->{Kids} attribute not supported for DBI::PurePerl
t/zvp_08keeperr.............ok
t/zvp_09trace...............ok
t/zvp_10examp...............ok
t/zvp_11fetch...............ok
t/zvp_12quote...............ok
t/zvp_13taint...............skipped: Taint attributes not supported with DBI::PurePerl
t/zvp_14utf8................ok
t/zvp_15array...............ok
t/zvp_19fhtrace.............ok
t/zvp_20meta................ok
t/zvp_30subclass............ok
t/zvp_40profile.............skipped: profiling not supported for DBI::PurePerl
t/zvp_41prof_dump...........skipped: profiling not supported for DBI::PurePerl
t/zvp_42prof_data...........skipped: profiling not supported for DBI::PurePerl
t/zvp_43prof_env............skipped: profiling not supported for DBI::PurePerl
t/zvp_50dbm.................ok
t/zvp_60preparse............skipped: preparse not supported for DBI::PurePerl
t/zvp_65transact............ok
t/zvp_70callbacks...........skipped: $h->{Callbacks} attribute not supported for DBI::PurePerl
t/zvp_72childhandles........ok
t/zvp_80proxy...............skipped: modules required for proxy are probably not installed (e.g., RPC/PlClient.pm)
t/zvp_85gofer...............ok
t/zvp_86gofer_fail..........skipped: requires Callbacks which are not supported with PurePerl
t/zvp_87gofer_cache.........ok
t/zvxgp_01basics............ok
t/zvxgp_02dbidrv............ok
t/zvxgp_03handle............ok
t/zvxgp_04mods..............ok
t/zvxgp_05thrclone..........ok
t/zvxgp_06attrs.............ok
t/zvxgp_07kids..............skipped: $h->{Kids} attribute not supported for DBI::PurePerl
t/zvxgp_08keeperr...........ok
t/zvxgp_09trace.............ok
t/zvxgp_10examp.............ok
t/zvxgp_11fetch.............ok
t/zvxgp_12quote.............ok
t/zvxgp_13taint.............skipped: Taint attributes not supported with DBI::PurePerl
t/zvxgp_14utf8..............ok
t/zvxgp_15array.............ok
t/zvxgp_19fhtrace...........ok
t/zvxgp_20meta..............ok
t/zvxgp_30subclass..........ok
t/zvxgp_40profile...........skipped: profiling not supported for DBI::PurePerl
t/zvxgp_41prof_dump.........skipped: profiling not supported for DBI::PurePerl
t/zvxgp_42prof_data.........skipped: profiling not supported for DBI::PurePerl
t/zvxgp_43prof_env..........skipped: profiling not supported for DBI::PurePerl
t/zvxgp_50dbm...............ok
t/zvxgp_60preparse..........skipped: preparse not supported for DBI::PurePerl
t/zvxgp_65transact..........skipped: Transactions not supported by DBD::Gofer
t/zvxgp_70callbacks.........skipped: $h->{Callbacks} attribute not supported for DBI::PurePerl
t/zvxgp_72childhandles......ok
t/zvxgp_80proxy.............skipped: modules required for proxy are probably not installed (e.g., RPC/PlClient.pm)
t/zvxgp_85gofer.............ok
t/zvxgp_86gofer_fail........skipped: requires Callbacks which are not supported with PurePerl
t/zvxgp_87gofer_cache.......skipped: Gofer DBI_AUTOPROXY
All tests successful.
Files=126, Tests=5846, 69 wallclock secs ( 2.01 usr  0.19 sys + 59.06 cusr  5.58 csys = 66.84 CPU)
Result: PASS
test.pl 
DBI test application $Revision: 9451 $
Switch: DBI 1.602 by Tim Bunce, 1.602
Available Drivers: DBM, ExampleP, File, Gofer, Proxy, Sponge
dbi:ExampleP:: testing 3 sets of 20 connections:
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 
Disconnecting...
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 
Disconnecting...
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 
Disconnecting...
connect 20 and disconnect them, 3 times: 0.0116s / 60 = 0.0002s
Testing handle creation speed...
27397 NullP sth/s perl 5.008008 x86_64-linux-thread-multi-ld (gcc 4.1.2 -g -O3) 0.000036s

test.pl done
[ERROR] MAKE INSTALL failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) make[1]: warning: -jN forced in submake: disabling jobserver mode.
Appending installation info to /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/perllocal.pod
/bin/sh: /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/perllocal.pod: ©Úµ´¤£²ÅÅv­­ªº¾Þ§@
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ERROR: Can't create '/opt/perl/testers/bin'
Do not have write permissions on '/opt/perl/testers/bin'
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 at -e line 1
make[1]: *** [pure_site_install] Error 13


Key 'ok' () is of invalid type for 'CPANPLUS::Backend::RV::new' provided by CPANPLUS::Backend::__ANON__ at /opt/perl/testers/lib/site_perl/5.8.8/CPANPLUS/Backend.pm line 395
*** DBI installation cancelled.
*** Installing Apache::Session...
==> MISSING Signature file! <==
Running [/opt/perl/testers/bin/perl /opt/perl/testers/bin/cpanp-run-perl /home/imacat/.cpanplus/5.8.8/build/Apache-Session-1.86/Makefile.PL ]...

*** REQUEST ***
Please use Test::Reporter to report test results - it's the only way to measure
popularity of distribution.

If you use perl older than 5.6 - write to alexchorny[AT]gmail.com
and tell me what version do you use, and why.

Checking if your kit is complete...
Looks good
Warning: prerequisite Test::Deep 0.082 not found.
Warning: prerequisite Test::Exception 0.15 not found.
Writing Makefile for Apache::Session
==> MISSING Signature file! <==
Running [/opt/perl/testers/bin/perl /opt/perl/testers/bin/cpanp-run-perl /home/imacat/.cpanplus/5.8.8/build/Test-Deep-0.100/Makefile.PL ]...
Checking if your kit is complete...
Looks good
Warning: prerequisite Test::NoWarnings 0.02 not found.
Warning: prerequisite Test::Tester 0.04 not found.
Writing Makefile for Test::Deep
==> MISSING Signature file! <==
Running [/opt/perl/testers/bin/perl /opt/perl/testers/bin/cpanp-run-perl /home/imacat/.cpanplus/5.8.8/build/Test-NoWarnings-0.084/Makefile.PL ]...
Checking if your kit is complete...
Looks good
Warning: prerequisite Test::Tester 0.103 not found.
Writing Makefile for Test::NoWarnings
==> MISSING Signature file! <==
Running [/opt/perl/testers/bin/perl /opt/perl/testers/bin/cpanp-run-perl /home/imacat/.cpanplus/5.8.8/build/Test-Tester-0.107/Makefile.PL ]...
Checking if your kit is complete...
Looks good
Writing Makefile for Test::Tester
Running [/usr/bin/make test -j 2]...
make[1]: warning: -jN forced in submake: disabling jobserver mode.
t/auto.............ok
t/capture..........ok
t/check_tests......ok
t/depth............ok
t/run_test.........ok
All tests successful.
Files=5, Tests=169,  1 wallclock secs ( 0.02 usr  0.01 sys +  0.23 cusr  0.03 csys =  0.29 CPU)
Result: PASS
[ERROR] MAKE INSTALL failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) make[1]: warning: -jN forced in submake: disabling jobserver mode.
Appending installation info to /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/perllocal.pod
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ERROR: Can't create '/opt/perl/testers/lib/5.8.8/Test'
Do not have write permissions on '/opt/perl/testers/lib/5.8.8/Test'
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 at -e line 1
make[1]: *** [pure_perl_install] Error 13
make[1]: *** Waiting for unfinished jobs....
/bin/sh: /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/perllocal.pod: ©Úµ´¤£²ÅÅv­­ªº¾Þ§@


[ERROR] Failed to install 'Test::Tester' as prerequisite for 'Test::NoWarnings'

[ERROR] Unable to satisfy prerequisites for 'Test::NoWarnings' -- aborting install

[ERROR] Unable to create a new distribution object for 'Test::NoWarnings' -- cannot continue

[ERROR] Failed to install 'Test::NoWarnings' as prerequisite for 'Test::Deep'

[ERROR] Unable to satisfy prerequisites for 'Test::Deep' -- aborting install

[ERROR] Unable to create a new distribution object for 'Test::Deep' -- cannot continue

[ERROR] Failed to install 'Test::Deep' as prerequisite for 'Apache::Session'

[ERROR] Unable to satisfy prerequisites for 'Apache::Session' -- aborting install

[ERROR] Unable to create a new distribution object for 'Apache::Session' -- cannot continue

Key 'ok' () is of invalid type for 'CPANPLUS::Backend::RV::new' provided by CPANPLUS::Backend::__ANON__ at /opt/perl/testers/lib/site_perl/5.8.8/CPANPLUS/Backend.pm line 395
*** Apache::Session installation cancelled.
*** ExtUtils::AutoInstall installation finished.
Manifying blib/man3/OpenPlugin::Authenticate.3
Manifying blib/man3/OpenPlugin::HttpHeader::Apache.3
Manifying blib/man3/OpenPlugin::Upload.3
Manifying blib/man3/OpenPlugin::Cookie.3
Manifying blib/man3/OpenPlugin::Utility.3
Manifying blib/man3/OpenPlugin::Config::Perl.3
Manifying blib/man3/OpenPlugin::Exception.3
Manifying blib/man3/OpenPlugin::HttpHeader.3
Manifying blib/man3/OpenPlugin::Session.3
Manifying blib/man3/OpenPlugin::Datasource.3
Manifying blib/man3/OpenPlugin::Request::Apache2.3
Manifying blib/man3/OpenPlugin::Plugin.3
Manifying blib/man3/OpenPlugin::Config::Template.3
Manifying blib/man3/OpenPlugin::Config::Conf.3
Manifying blib/man3/OpenPlugin::Param.3
Manifying blib/man3/OpenPlugin::Cache::File.3
Manifying blib/man3/OpenPlugin::Param::Apache.3
Manifying blib/man3/OpenPlugin::Request.3
Manifying blib/man3/OpenPlugin::Param::CGI.3
Manifying blib/man3/OpenPlugin::Upload::CGI.3
Manifying blib/man3/OpenPlugin::Session::ApacheSession.3
Manifying blib/man3/OpenPlugin::Authenticate::DBI.3
Manifying blib/man3/OpenPlugin::Datasource::LDAP.3
Manifying blib/man3/OpenPlugin::Config::XML.3
Manifying blib/man3/OpenPlugin::Param::Apache2.3
Manifying blib/man3/OpenPlugin::Cookie::Apache.3
Manifying blib/man3/OpenPlugin::Upload::Apache.3
Manifying blib/man3/OpenPlugin::Authenticate::SMB.3
Manifying blib/man3/OpenPlugin::Config.3
Manifying blib/man3/OpenPlugin::Request::Apache.3
Manifying blib/man3/OpenPlugin::Log::Log4perl.3
Manifying blib/man3/OpenPlugin::Cookie::CGI.3
Manifying blib/man3/OpenPlugin::Application.3
Manifying blib/man3/OpenPlugin::Exception::Template.3
Manifying blib/man3/OpenPlugin::Upload::Apache2.3
Manifying blib/man3/OpenPlugin::HttpHeader::CGI.3
Manifying blib/man3/OpenPlugin::Authenticate::Template.3
Manifying blib/man3/OpenPlugin::Datasource::Template.3
Manifying blib/man3/OpenPlugin::Datasource::DBI.3
Manifying blib/man3/OpenPlugin::HttpHeader::Apache2.3
Manifying blib/man3/OpenPlugin::Cookie::Apache2.3
Manifying blib/man3/OpenPlugin::Authenticate::PAM.3
Manifying blib/man3/OpenPlugin::Config::Ini.3
Manifying blib/man3/OpenPlugin::Cache.3
Manifying blib/man3/OpenPlugin::Request::CGI.3
Manifying blib/man3/OpenPlugin.3
Manifying blib/man3/OpenPlugin::Log.3

[ERROR] [Fri Mar 21 03:37:10 2008] MAKE TEST failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) *** Installing dependencies...
[MSG] No '/home/imacat/.cpanplus/custom-sources' dir, skipping custom sources
*** Installing Class::Factory...
==> MISSING Signature file! <==
Running [/opt/perl/testers/bin/perl /opt/perl/testers/bin/cpanp-run-perl /home/imacat/.cpanplus/5.8.8/build/Class-Factory-1.06/Makefile.PL ]...
Writing Makefile for Class::Factory
Running [/usr/bin/make test -j 2]...
make[1]: warning: -jN forced in submake: disabling jobserver mode.
t/factory......ok
All tests successful.
Files=1, Tests=39,  0 wallclock secs ( 0.00 usr  0.00 sys +  0.03 cusr  0.02 csys =  0.05 CPU)
Result: PASS
[ERROR] MAKE INSTALL failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) make[1]: warning: -jN forced in submake: disabling jobserver mode.
Appending installation info to /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/perllocal.pod
/bin/sh: /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/perllocal.pod: ©Úµ´¤£²ÅÅv­­ªº¾Þ§@
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ERROR: Can't create '/opt/perl/testers/lib/site_perl/5.8.8/Class'
mkdir /opt/perl/testers/lib/site_perl/5.8.8/Class: ©Úµ´¤£²ÅÅv­­ªº¾Þ§@ at /opt/perl/testers/lib/5.8.8/ExtUtils/Install.pm line 450

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 at -e line 1
make[1]: *** [pure_site_install] Error 13
make[1]: *** Waiting for unfinished jobs....
Manifying blib/man3/Class::Factory.3


Key 'ok' () is of invalid type for 'CPANPLUS::Backend::RV::new' provided by CPANPLUS::Backend::__ANON__ at /opt/perl/testers/lib/site_perl/5.8.8/CPANPLUS/Backend.pm line 395
*** Class::Factory installation cancelled.
*** Installing MD5...
==> MISSING Signature file! <==
Running [/opt/perl/testers/bin/perl /opt/perl/testers/bin/cpanp-run-perl /home/imacat/.cpanplus/5.8.8/build/MD5-2.03/Makefile.PL ]...
Writing Makefile for MD5
Running [/usr/bin/make test -j 2]...
make[1]: warning: -jN forced in submake: disabling jobserver mode.
t/md5......ok
All tests successful.
Files=1, Tests=14,  0 wallclock secs ( 0.02 usr  0.00 sys +  0.01 cusr  0.01 csys =  0.04 CPU)
Result: PASS
[ERROR] MAKE INSTALL failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) make[1]: warning: -jN forced in submake: disabling jobserver mode.
Appending installation info to /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/perllocal.pod
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ERROR: Can't create '/opt/perl/testers/lib/site_perl/5.8.8'
Do not have write permissions on '/opt/perl/testers/lib/site_perl/5.8.8'
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 at -e line 1
make[1]: *** [pure_site_install] Error 13
make[1]: *** Waiting for unfinished jobs....
/bin/sh: /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/perllocal.pod: ©Úµ´¤£²ÅÅv­­ªº¾Þ§@


Key 'ok' () is of invalid type for 'CPANPLUS::Backend::RV::new' provided by CPANPLUS::Backend::__ANON__ at /opt/perl/testers/lib/site_perl/5.8.8/CPANPLUS/Backend.pm line 395
*** MD5 installation cancelled.
*** Installing Error...
==> MISSING Signature file! <==
Running [/opt/perl/testers/bin/perl /opt/perl/testers/bin/cpanp-run-perl /home/imacat/.cpanplus/5.8.8/build/Error-0.17012/Makefile.PL ]...
Writing Makefile for Error
Running [/usr/bin/make test -j 2]...
make[1]: warning: -jN forced in submake: disabling jobserver mode.
t/01throw..............................ok
t/02order..............................ok
t/03throw-non-Error....................ok
t/04use-base-Error-Simple..............ok
t/05text-errors-with-file-handles......ok
t/06customize-text-throw...............ok
t/07try-in-obj-destructor..............ok
t/08warndie............................ok
t/09dollar-at..........................ok
t/10throw-in-catch.....................ok
t/11rethrow............................ok
t/12wrong-error-var....................ok
t/13except-arg0........................ok
t/pod-coverage.........................skipped: Test::Pod::Coverage 1.04 required for testing POD coverage
t/pod..................................ok
All tests successful.
Files=15, Tests=62,  1 wallclock secs ( 0.08 usr  0.04 sys +  0.62 cusr  0.12 csys =  0.86 CPU)
Result: PASS
[ERROR] MAKE INSTALL failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) make[1]: warning: -jN forced in submake: disabling jobserver mode.
Appending installation info to /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/perllocal.pod
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ERROR: Can't create '/opt/perl/testers/lib/site_perl/5.8.8'
Do not have write permissions on '/opt/perl/testers/lib/site_perl/5.8.8'
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 at -e line 1
make[1]: *** [pure_site_install] Error 13
make[1]: *** Waiting for unfinished jobs....
/bin/sh: /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/perllocal.pod: ©Úµ´¤£²ÅÅv­­ªº¾Þ§@


Key 'ok' () is of invalid type for 'CPANPLUS::Backend::RV::new' provided by CPANPLUS::Backend::__ANON__ at /opt/perl/testers/lib/site_perl/5.8.8/CPANPLUS/Backend.pm line 395
*** Error installation cancelled.
*** Installing Devel::StackTrace...
WARNING: This key is not certified with a trusted signature!
Primary key fingerprint: 6E6F 1E40 8E80 6724 C116  8028 DCEA F767 342E 89F3
Running [/opt/perl/testers/bin/perl /opt/perl/testers/bin/cpanp-run-perl /home/imacat/.cpanplus/5.8.8/build/Devel-StackTrace-1.16/Makefile.PL ]...
Writing Makefile for Devel::StackTrace
Running [/usr/bin/make test -j 2]...
make[1]: warning: -jN forced in submake: disabling jobserver mode.
t/01-basic..........ok
t/kwalitee..........skipped: This test is only run for the module author
t/pod-coverage......skipped: This test is only run for the module author
t/pod...............skipped: This test is only run for the module author
All tests successful.
Files=4, Tests=34,  0 wallclock secs ( 0.01 usr  0.01 sys +  0.14 cusr  0.02 csys =  0.18 CPU)
Result: PASS
[ERROR] MAKE INSTALL failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) make[1]: warning: -jN forced in submake: disabling jobserver mode.
Appending installation info to /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/perllocal.pod
/bin/sh: /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/perllocal.pod: ©Úµ´¤£²ÅÅv­­ªº¾Þ§@
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ERROR: Can't create '/opt/perl/testers/lib/site_perl/5.8.8/Devel'
Do not have write permissions on '/opt/perl/testers/lib/site_perl/5.8.8/Devel'
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 at -e line 1
make[1]: *** [pure_site_install] Error 13


Key 'ok' () is of invalid type for 'CPANPLUS::Backend::RV::new' provided by CPANPLUS::Backend::__ANON__ at /opt/perl/testers/lib/site_perl/5.8.8/CPANPLUS/Backend.pm line 395
*** Devel::StackTrace installation cancelled.
*** Installing Params::Validate...
==> MISSING Signature file! <==
Running [/opt/perl/testers/bin/perl /opt/perl/testers/bin/cpanp-run-perl /home/imacat/.cpanplus/5.8.8/build/Params-Validate-0.89/Makefile.PL ]...
Testing if you have a C compiler
Writing Makefile for Params::Validate
Running [/usr/bin/make test -j 2]...
make[1]: warning: -jN forced in submake: disabling jobserver mode.
t/01-validate..............ok
t/02-noop..................ok
t/03-attribute.............ok
t/04-defaults..............ok
t/05-noop_default..........ok
t/06-options...............ok
t/07-with..................ok
t/08-noop_with.............ok
t/09-regex.................ok
t/10-noop_regex............ok
t/11-cb....................ok
t/12-noop_cb...............ok
t/13-taint.................ok
t/14-no_validate...........ok
t/15-case..................ok
t/16-normalize.............ok
t/17-callbacks.............ok
t/18-depends...............ok
t/19-untaint...............skipped: These tests require Test::Taint 0.02+ to run
t/21-can...................ok
t/22-overload-can-bug......ok
t/23-readonly..............skipped: Need Readonly::XS and Readonly for this test
t/24-tied..................ok
t/25-undef-regex...........ok
t/26-isa...................ok
t/27-string-as-type........ok
t/pod-coverage.............skipped: This test is only run for the module author
t/pod......................skipped: This test is only run for the module author
All tests successful.
Files=28, Tests=486,  3 wallclock secs ( 0.15 usr  0.08 sys +  1.49 cusr  0.19 csys =  1.91 CPU)
Result: PASS
[ERROR] MAKE INSTALL failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) make[1]: warning: -jN forced in submake: disabling jobserver mode.
Appending installation info to /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/perllocal.pod
/bin/sh: /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/perllocal.pod: ©Úµ´¤£²ÅÅv­­ªº¾Þ§@
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ERROR: Can't create '/opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld/Attribute/Params'
mkdir /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld/Attribute: ©Úµ´¤£²ÅÅv­­ªº¾Þ§@ at /opt/perl/testers/lib/5.8.8/ExtUtils/Install.pm line 450

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 at -e line 1
make[1]: *** [pure_site_install] Error 13
make[1]: *** Waiting for unfinished jobs....


Key 'ok' () is of invalid type for 'CPANPLUS::Backend::RV::new' provided by CPANPLUS::Backend::__ANON__ at /opt/perl/testers/lib/site_perl/5.8.8/CPANPLUS/Backend.pm line 395
*** Params::Validate installation cancelled.
*** Installing XML::DOM...
==> MISSING Signature file! <==
Running [/opt/perl/testers/bin/perl /opt/perl/testers/bin/cpanp-run-perl /home/imacat/.cpanplus/5.8.8/build/XML-DOM-1.44/Makefile.PL ]...
Warning: prerequisite XML::Parser 2.30 not found.
Warning: prerequisite XML::Parser::PerlSAX 0.07 not found.
Warning: prerequisite XML::RegExp 0 not found.
Writing Makefile for XML-DOM
==> MISSING Signature file! <==
Running [/opt/perl/testers/bin/perl /opt/perl/testers/bin/cpanp-run-perl /home/imacat/.cpanplus/5.8.8/build/XML-Parser-2.36/Makefile.PL ]...
Writing Makefile for XML::Parser::Expat
Writing Makefile for XML::Parser
Running [/usr/bin/make test -j 2]...
make[1]: warning: -jN forced in submake: disabling jobserver mode.
t/astress...........ok
t/cdata.............ok
t/decl..............ok
t/defaulted.........ok
t/encoding..........ok
t/external_ent......ok
t/file..............ok
t/finish............ok
t/namespaces........ok
t/parament..........ok
t/partial...........ok
t/skip..............ok
t/stream............ok
t/styles............ok
All tests successful.
Files=14, Tests=130,  1 wallclock secs ( 0.03 usr  0.02 sys +  0.62 cusr  0.16 csys =  0.83 CPU)
Result: PASS
[ERROR] MAKE INSTALL failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) make[1]: warning: -jN forced in submake: disabling jobserver mode.
Appending installation info to /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/perllocal.pod
/bin/sh: /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/perllocal.pod: ©Úµ´¤£²ÅÅv­­ªº¾Þ§@
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ERROR: Can't create '/opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld/XML'
mkdir /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld/XML: ©Úµ´¤£²ÅÅv­­ªº¾Þ§@ at /opt/perl/testers/lib/5.8.8/ExtUtils/Install.pm line 450

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 at -e line 1
make[1]: *** [pure_site_install] Error 13
make[1]: *** Waiting for unfinished jobs....


[ERROR] Failed to install 'XML::Parser' as prerequisite for 'XML::DOM'

[ERROR] Unable to satisfy prerequisites for 'XML::DOM' -- aborting install

[ERROR] Unable to create a new distribution object for 'XML::DOM' -- cannot continue

Key 'ok' () is of invalid type for 'CPANPLUS::Backend::RV::new' provided by CPANPLUS::Backend::__ANON__ at /opt/perl/testers/lib/site_perl/5.8.8/CPANPLUS/Backend.pm line 395
*** XML::DOM installation cancelled.
*** Installing Log::Dispatch...
WARNING: This key is not certified with a trusted signature!
Primary key fingerprint: 6E6F 1E40 8E80 6724 C116  8028 DCEA F767 342E 89F3
Running [/opt/perl/testers/bin/perl /opt/perl/testers/bin/cpanp-run-perl /home/imacat/.cpanplus/5.8.8/build/Log-Dispatch-2.21/Makefile.PL ]...
Warning: prerequisite Module::Build 0 not found.
Warning: prerequisite Params::Validate 0.15 not found.
Writing Makefile for Log::Dispatch
WARNING: This key is not certified with a trusted signature!
Primary key fingerprint: ADCB DB05 B40E B2A2 A555  5462 82BB CC04 B7EF 9476
Running [/opt/perl/testers/bin/perl /opt/perl/testers/bin/cpanp-run-perl /home/imacat/.cpanplus/5.8.8/build/Module-Build-0.2808/Makefile.PL ]...
# running Build.PL 
/opt/perl/testers/bin/perl Build.PL
 * Optional prerequisite ExtUtils::ParseXS is not installed
 * Optional prerequisite Pod::Readme is not installed
 * Optional prerequisite ExtUtils::CBuilder is not installed

ERRORS/WARNINGS FOUND IN PREREQUISITES.  You may wish to install the versions
of the modules indicated above before proceeding with this installation

    - ExtUtils::CBuilder is not installed
    * Optional prerequisite ExtUtils::ParseXS is not installed

Checking whether your kit is complete...
Looks good

Checking prerequisites...
Checking features:
  YAML_support.......enabled
  manpage_support....enabled
  C_support..........disabled
  HTML_support.......enabled
Deleting Build
Removed previous script 'Build'

Creating new 'Build' script for 'Module-Build' version '0.2808'
Running [/usr/bin/make test -j 2]...
make[1]: warning: -jN forced in submake: disabling jobserver mode.
t/basic.................ok
t/compat................ok
t/destinations..........ok
t/ext...................ok
t/extend................ok
t/files.................ok
t/help..................ok
t/install...............ok
t/manifypods............ok
t/mbyaml................ok
t/metadata..............ok
t/metadata2.............ok
t/moduleinfo............ok
t/new_from_context......ok
t/notes.................ok
t/par...................skipped: C_support not enabled
t/parents...............ok
t/pod_parser............ok
t/ppm...................skipped: C_support not enabled
t/runthrough............ok
t/signature.............skipped: $ENV{TEST_SIGNATURE} is not set
t/test_type.............ok
t/test_types............ok
t/tilde.................ok
t/versions..............ok
t/xs....................skipped: C_support not enabled
All tests successful.
Files=26, Tests=750, 20 wallclock secs ( 0.35 usr  0.04 sys + 16.67 cusr  3.61 csys = 20.67 CPU)
Result: PASS
*** Log::Dispatch installation cancelled.
*** Installing Log::Log4perl...
[ERROR] MAKE INSTALL failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) make[1]: warning: -jN forced in submake: disabling jobserver mode.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ERROR: Can't create '/opt/perl/testers/bin'
Do not have write permissions on '/opt/perl/testers/bin'
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 at lib/Module/Build/Base.pm line 2788
make[1]: *** [install] Error 13


[ERROR] Failed to install 'Module::Build' as prerequisite for 'Log::Dispatch'

[ERROR] Unable to satisfy prerequisites for 'Log::Dispatch' -- aborting install

[ERROR] Unable to create a new distribution object for 'Log::Dispatch' -- cannot continue

Key 'ok' () is of invalid type for 'CPANPLUS::Backend::RV::new' provided by CPANPLUS::Backend::__ANON__ at /opt/perl/testers/lib/site_perl/5.8.8/CPANPLUS/Backend.pm line 395
==> MISSING Signature file! <==
Running [/opt/perl/testers/bin/perl /opt/perl/testers/bin/cpanp-run-perl /home/imacat/.cpanplus/5.8.8/build/Log-Log4perl-1.15/Makefile.PL ]...
Writing Makefile for Log::Log4perl
Running [/usr/bin/make test -j 2]...
make[1]: warning: -jN forced in submake: disabling jobserver mode.
t/001Level.............ok
t/002Logger............ok
t/003Layout............ok
t/004Config............ok
t/005Config-Perl.......ok
t/006Config-Java.......skipped: only with Log::Dispatch
t/007LogPrio...........ok
t/008ConfCat...........ok
t/009Deuce.............ok
t/010JConsole..........skipped: only with Log::Dispatch
t/011JFile.............skipped: only with Log::Dispatch
t/012Deeper............skipped: only with Log::Dispatch
t/013Bench.............ok
t/014ConfErrs..........ok
t/015fltmsg............ok
t/016Export............ok
t/017Watch.............ok
t/018Init..............ok
t/019Warn..............ok
t/020Easy..............ok
t/020Easy2.............ok
t/021AppThres..........ok
t/022Wrap..............ok
t/023Date..............ok
t/024WarnDieCarp.......ok
t/025CustLevels........ok
t/026FileApp...........ok
t/027Watch2............ok
t/027Watch3............ok
t/028Additivity........ok
t/029SysWide...........ok
t/030LDLevel...........ok
t/031NDC...............ok
t/032JRollFile.........skipped: only with Log::Dispatch::FileRotate 1.10
t/033UsrCspec..........ok
t/034DBI...............skipped: DBD::CSV or SQL::Statement 1.005 not installed, skipping tests
t/035JDBCAppender......skipped: only with Log::Dispatch and DBD::CSV
t/036JSyslog...........ok
t/037JWin32Event.......skipped: only with Log::Dispatch::Win32EventLog
t/038XML-DOM1..........skipped: only with XML::DOM > 1.29
t/039XML-DOM2..........skipped: only with XML::DOM > 1.29
t/040Filter............ok
t/041SafeEval..........ok
t/042SyncApp...........skipped: - only with L4P_ALL_TESTS
t/043VarSubst..........ok
t/044XML-Filter........skipped: only with XML::DOM > 1.29
t/045Composite.........ok
t/046RRDs..............skipped: (RRDs not installed)
t/048lwp...............ok
t/049Unhide............ok
t/050Buffer............ok
t/051Extra.............ok
t/052Utf8..............ok
t/053Resurrect.........ok
t/054Subclass..........ok
All tests successful.
Files=55, Tests=591, 25 wallclock secs ( 0.25 usr  0.11 sys +  4.57 cusr  0.55 csys =  5.48 CPU)
Result: PASS
[ERROR] MAKE INSTALL failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) make[1]: warning: -jN forced in submake: disabling jobserver mode.
Appending installation info to /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/perllocal.pod
/bin/sh: /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/perllocal.pod: ©Úµ´¤£²ÅÅv­­ªº¾Þ§@
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ERROR: Can't create '/opt/perl/testers/lib/site_perl/5.8.8/Log'
Do not have write permissions on '/opt/perl/testers/lib/site_perl/5.8.8/Log'
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 at -e line 1
make[1]: *** [pure_site_install] Error 13
make[1]: *** Waiting for unfinished jobs....
Manifying blib/man3/Log::Log4perl::JavaMap::ConsoleAppender.3
Manifying blib/man3/Log::Log4perl::Filter::LevelRange.3
Manifying blib/man3/Log::Log4perl::JavaMap::TestBuffer.3
Manifying blib/man3/Log::Log4perl::MDC.3
Manifying blib/man3/Log::Log4perl::NDC.3
Manifying blib/man3/Log::Log4perl::Layout.3
Manifying blib/man3/Log::Log4perl::Appender::TestBuffer.3
Manifying blib/man3/Log::Log4perl::Appender::ScreenColoredLevels.3
Manifying blib/man3/Log::Log4perl::Resurrector.3
Manifying blib/man3/Log::Log4perl::Layout::SimpleLayout.3
Manifying blib/man3/Log::Log4perl::JavaMap::SyslogAppender.3
Manifying blib/man3/Log::Log4perl::Filter.3
Manifying blib/man3/Log::Log4perl::Util::Semaphore.3
Manifying blib/man3/Log::Log4perl::Util.3
Manifying blib/man3/Log::Log4perl::Appender::Limit.3
Manifying blib/man3/Log::Log4perl::Appender::File.3
Manifying blib/man3/Log::Log4perl::Level.3
Manifying blib/man3/Log::Log4perl::FAQ.3


Key 'ok' () is of invalid type for 'CPANPLUS::Backend::RV::new' provided by CPANPLUS::Backend::__ANON__ at /opt/perl/testers/lib/site_perl/5.8.8/CPANPLUS/Backend.pm line 395
*** Log::Log4perl installation cancelled.
*** Installing HTML::Template...
==> MISSING Signature file! <==
Running [/opt/perl/testers/bin/perl /opt/perl/testers/bin/cpanp-run-perl /home/imacat/.cpanplus/5.8.8/build/HTML-Template-2.9/Makefile.PL ]...
Writing Makefile for HTML::Template
Running [/usr/bin/make test -j 2]...
make[1]: warning: -jN forced in submake: disabling jobserver mode.
t/01-bad-args................ok
t/01coderefs.................ok
t/02-parse...................ok
t/02random...................ok
t/03-associate...............ok
t/03else_else_bug............ok
t/04-type-source.............ok
t/04default_escape...........ok
t/04default_with_escape......ok
t/04no_taintmode.............ok
t/05-blind-cache.............ok
t/05force_untaint............ok
t/05nested_global............ok
t/06-file-cache-dir..........ok
t/07-double-file-cache.......ok
t/08-cache-debug.............ok
t/09-caching-precluded.......ok
t/10-param...................ok
t/11-non-file-templates......ok
t/99-old-test-pl.............ok
All tests successful.
Files=20, Tests=457,  3 wallclock secs ( 0.19 usr  0.03 sys +  1.38 cusr  0.18 csys =  1.78 CPU)
Result: PASS
[ERROR] MAKE INSTALL failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) make[1]: warning: -jN forced in submake: disabling jobserver mode.
Appending installation info to /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/perllocal.pod
/bin/sh: /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/perllocal.pod: ©Úµ´¤£²ÅÅv­­ªº¾Þ§@
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ERROR: Can't create '/opt/perl/testers/lib/site_perl/5.8.8/HTML'
Do not have write permissions on '/opt/perl/testers/lib/site_perl/5.8.8/HTML'
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 at -e line 1
make[1]: *** [pure_site_install] Error 13
make[1]: *** Waiting for unfinished jobs....


Key 'ok' () is of invalid type for 'CPANPLUS::Backend::RV::new' provided by CPANPLUS::Backend::__ANON__ at /opt/perl/testers/lib/site_perl/5.8.8/CPANPLUS/Backend.pm line 395
*** HTML::Template installation cancelled.
*** Installing CGI::Application...
==> MISSING Signature file! <==
Running [/opt/perl/testers/bin/perl /opt/perl/testers/bin/cpanp-run-perl /home/imacat/.cpanplus/5.8.8/build/CGI-Application-4.06/Makefile.PL ]...
Warning: prerequisite HTML::Template 0 not found.
Writing Makefile for CGI::Application
[ERROR] Prerequisite 'HTML::Template' failed to install before in this session

[ERROR] Unable to satisfy prerequisites for 'CGI::Application' -- aborting install

[ERROR] Unable to create a new distribution object for 'CGI::Application' -- cannot continue

Key 'ok' () is of invalid type for 'CPANPLUS::Backend::RV::new' provided by CPANPLUS::Backend::__ANON__ at /opt/perl/testers/lib/site_perl/5.8.8/CPANPLUS/Backend.pm line 395
*** CGI::Application installation cancelled.
*** Installing Digest::SHA1...
==> MISSING Signature file! <==
Running [/opt/perl/testers/bin/perl /opt/perl/testers/bin/cpanp-run-perl /home/imacat/.cpanplus/5.8.8/build/Digest-SHA1-2.11/Makefile.PL ]...
Writing Makefile for Digest::SHA1
Running [/usr/bin/make test -j 2]...
make[1]: warning: -jN forced in submake: disabling jobserver mode.
t/badfile......ok
t/bits.........ok
t/sha1.........ok
All tests successful.
Files=3, Tests=17,  0 wallclock secs ( 0.02 usr  0.00 sys +  0.05 cusr  0.02 csys =  0.09 CPU)
Result: PASS
[ERROR] MAKE INSTALL failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) make[1]: warning: -jN forced in submake: disabling jobserver mode.
Appending installation info to /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/perllocal.pod
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
/bin/sh: /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/perllocal.pod: ©Úµ´¤£²ÅÅv­­ªº¾Þ§@
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ERROR: Can't create '/opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld/Digest'
Do not have write permissions on '/opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld/Digest'
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 at -e line 1
make[1]: *** [pure_site_install] Error 13


Key 'ok' () is of invalid type for 'CPANPLUS::Backend::RV::new' provided by CPANPLUS::Backend::__ANON__ at /opt/perl/testers/lib/site_perl/5.8.8/CPANPLUS/Backend.pm line 395
*** Digest::SHA1 installation cancelled.
*** Installing Cache::Cache...
==> MISSING Signature file! <==
Running [/opt/perl/testers/bin/perl /opt/perl/testers/bin/cpanp-run-perl /home/imacat/.cpanplus/5.8.8/build/Cache-Cache-1.05/Makefile.PL ]...
Checking for IPC::ShareLite... not found

  NOTE: Your system does not seem to have IPC::ShareLite installed.
  This module is a prerequisite for the SharedMemoryCache
  implementations.  However, since it is not available on all
  platforms, the Cache::Cache module does not list it as an explicit
  dependency.  If you are able to build IPC::ShareLite (available on
  CPAN), please install it now and re run this Makefile.PL.
  Automatically disabling the tests for the SharedMemoryCache.

Warning: prerequisite Digest::SHA1 2.02 not found.
Warning: prerequisite Error 0.15 not found.
Writing Makefile for Cache::Cache
------------------------------------------------------------------
Please be patient while running "make test" as the full test suite
takes roughly two minutes to complete.
------------------------------------------------------------------
[ERROR] Prerequisite 'Digest::SHA1' failed to install before in this session

[ERROR] Unable to satisfy prerequisites for 'Cache::Cache' -- aborting install

[ERROR] Unable to create a new distribution object for 'Cache::Cache' -- cannot continue

Key 'ok' () is of invalid type for 'CPANPLUS::Backend::RV::new' provided by CPANPLUS::Backend::__ANON__ at /opt/perl/testers/lib/site_perl/5.8.8/CPANPLUS/Backend.pm line 395
*** Cache::Cache installation cancelled.
*** Installing Config::General...
==> MISSING Signature file! <==
Running [/opt/perl/testers/bin/perl /opt/perl/testers/bin/cpanp-run-perl /home/imacat/.cpanplus/5.8.8/build/Config-General-2.38/Makefile.PL ]...
Writing Makefile for Config::General
Running [/usr/bin/make test -j 2]...
make[1]: warning: -jN forced in submake: disabling jobserver mode.
t/run......# 
# Please ignore the following message about IncludeAgain
File t/included.conf already loaded.  Use -IncludeAgain to load it again.
ok
All tests successful.
Files=1, Tests=45,  0 wallclock secs ( 0.01 usr  0.00 sys +  0.13 cusr  0.00 csys =  0.14 CPU)
Result: PASS
*** Config::General installation cancelled.
*** Installing DBI...
[ERROR] MAKE INSTALL failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) make[1]: warning: -jN forced in submake: disabling jobserver mode.
Appending installation info to /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/perllocal.pod
/bin/sh: /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/perllocal.pod: ©Úµ´¤£²ÅÅv­­ªº¾Þ§@
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ERROR: Can't create '/opt/perl/testers/lib/site_perl/5.8.8/Config'
Do not have write permissions on '/opt/perl/testers/lib/site_perl/5.8.8/Config'
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 at -e line 1
make[1]: *** [pure_site_install] Error 13
make[1]: *** Waiting for unfinished jobs....
Manifying blib/man3/Config::General.3
Manifying blib/man3/Config::General::Interpolated.3
Manifying blib/man3/Config::General::Extended.3


Key 'ok' () is of invalid type for 'CPANPLUS::Backend::RV::new' provided by CPANPLUS::Backend::__ANON__ at /opt/perl/testers/lib/site_perl/5.8.8/CPANPLUS/Backend.pm line 395
==> MISSING Signature file! <==
Running [/opt/perl/testers/bin/perl /opt/perl/testers/bin/cpanp-run-perl /home/imacat/.cpanplus/5.8.8/build/DBI-1.602/Makefile.PL ]...

*** You are using a perl configured with threading enabled.
*** You should be aware that using multiple threads is
*** not recommended for production environments.

*** Note:
    The optional PlRPC-modules (RPC::PlServer etc) are not installed.
    If you want to use the DBD::Proxy driver and DBI::ProxyServer
    modules, then you'll need to install the RPC::PlServer, RPC::PlClient,
    Storable and Net::Daemon modules. The CPAN Bundle::DBI may help you.
    You can install them any time after installing the DBI.
    You do *not* need these modules for typical DBI usage.

Optional modules are available from any CPAN mirror, in particular
    http://search.cpan.org/
    http://www.perl.com/CPAN/modules/by-module
    http://www.perl.org/CPAN/modules/by-module
    ftp://ftp.funet.fi/pub/languages/perl/CPAN/modules/by-module

Your perl was compiled with gcc (version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)), okay.
Creating test wrappers for DBI::PurePerl:
t/zvp_01basics.t 
t/zvp_02dbidrv.t 
t/zvp_03handle.t 
t/zvp_04mods.t 
t/zvp_05thrclone.t (use threads)
t/zvp_06attrs.t 
t/zvp_07kids.t 
t/zvp_08keeperr.t 
t/zvp_09trace.t 
t/zvp_10examp.t 
t/zvp_11fetch.t 
t/zvp_12quote.t 
t/zvp_13taint.t 
t/zvp_14utf8.t 
t/zvp_15array.t 
t/zvp_19fhtrace.t 
t/zvp_20meta.t 
t/zvp_30subclass.t 
t/zvp_40profile.t 
t/zvp_41prof_dump.t 
t/zvp_42prof_data.t 
t/zvp_43prof_env.t 
t/zvp_50dbm.t 
t/zvp_60preparse.t 
t/zvp_65transact.t 
t/zvp_70callbacks.t 
t/zvp_72childhandles.t 
t/zvp_80proxy.t 
t/zvp_85gofer.t 
t/zvp_86gofer_fail.t 
t/zvp_87gofer_cache.t 
Creating test wrappers for DBD::Gofer:
t/zvg_01basics.t 
t/zvg_02dbidrv.t 
t/zvg_03handle.t 
t/zvg_04mods.t 
t/zvg_05thrclone.t (use threads)
t/zvg_06attrs.t 
t/zvg_07kids.t 
t/zvg_08keeperr.t 
t/zvg_09trace.t 
t/zvg_10examp.t 
t/zvg_11fetch.t 
t/zvg_12quote.t 
t/zvg_13taint.t 
t/zvg_14utf8.t 
t/zvg_15array.t 
t/zvg_19fhtrace.t 
t/zvg_20meta.t 
t/zvg_30subclass.t 
t/zvg_40profile.t 
t/zvg_41prof_dump.t 
t/zvg_42prof_data.t 
t/zvg_43prof_env.t 
t/zvg_50dbm.t 
t/zvg_60preparse.t 
t/zvg_65transact.t 
t/zvg_70callbacks.t 
t/zvg_72childhandles.t 
t/zvg_80proxy.t 
t/zvg_85gofer.t 
t/zvg_86gofer_fail.t 
t/zvg_87gofer_cache.t 
Creating test wrappers for PurePerl & Gofer:
t/zvxgp_01basics.t 
t/zvxgp_02dbidrv.t 
t/zvxgp_03handle.t 
t/zvxgp_04mods.t 
t/zvxgp_05thrclone.t (use threads)
t/zvxgp_06attrs.t 
t/zvxgp_07kids.t 
t/zvxgp_08keeperr.t 
t/zvxgp_09trace.t 
t/zvxgp_10examp.t 
t/zvxgp_11fetch.t 
t/zvxgp_12quote.t 
t/zvxgp_13taint.t 
t/zvxgp_14utf8.t 
t/zvxgp_15array.t 
t/zvxgp_19fhtrace.t 
t/zvxgp_20meta.t 
t/zvxgp_30subclass.t 
t/zvxgp_40profile.t 
t/zvxgp_41prof_dump.t 
t/zvxgp_42prof_data.t 
t/zvxgp_43prof_env.t 
t/zvxgp_50dbm.t 
t/zvxgp_60preparse.t 
t/zvxgp_65transact.t 
t/zvxgp_70callbacks.t 
t/zvxgp_72childhandles.t 
t/zvxgp_80proxy.t 
t/zvxgp_85gofer.t 
t/zvxgp_86gofer_fail.t 
t/zvxgp_87gofer_cache.t 

    I see you're using perl 5.008008 on x86_64-linux-thread-multi-ld, okay.
    Remember to actually *read* the README file!
    Use  'make' to build the software (dmake or nmake on Windows).
    Then 'make test' to execute self tests.
    Then 'make install' to install the DBI and then delete this working
    directory before unpacking and building any DBD::* drivers.

Writing Makefile for DBI
Running [/usr/bin/make test -j 2]...
make[1]: warning: -jN forced in submake: disabling jobserver mode.
t/01basics..................ok
t/02dbidrv..................ok
t/03handle..................ok
t/04mods....................ok
t/05thrclone................ok
t/06attrs...................ok
t/07kids....................ok
t/08keeperr.................ok
t/09trace...................ok
t/10examp...................ok
t/11fetch...................ok
t/12quote...................ok
t/13taint...................ok
t/14utf8....................ok
t/15array...................ok
t/19fhtrace.................ok
t/20meta....................ok
t/30subclass................ok
t/40profile.................ok
t/41prof_dump...............ok
t/42prof_data...............ok
t/43prof_env................ok
t/50dbm.....................ok
t/60preparse................ok
t/65transact................ok
t/70callbacks...............ok
t/72childhandles............ok
t/80proxy...................skipped: modules required for proxy are probably not installed (e.g., RPC/PlClient.pm)
t/85gofer...................ok
t/86gofer_fail..............ok
t/87gofer_cache.............ok
t/pod-coverage..............skipped: Test::Pod::Coverage 1.04 required for testing POD coverage
t/pod.......................ok
t/zvg_01basics..............ok
t/zvg_02dbidrv..............ok
t/zvg_03handle..............ok
t/zvg_04mods................ok
t/zvg_05thrclone............ok
t/zvg_06attrs...............ok
t/zvg_07kids................ok
t/zvg_08keeperr.............ok
t/zvg_09trace...............ok
t/zvg_10examp...............ok
t/zvg_11fetch...............ok
t/zvg_12quote...............ok
t/zvg_13taint...............skipped: Taint attribute tests not functional with DBI_AUTOPROXY
t/zvg_14utf8................ok
t/zvg_15array...............ok
t/zvg_19fhtrace.............ok
t/zvg_20meta................ok
t/zvg_30subclass............ok
t/zvg_40profile.............ok
t/zvg_41prof_dump...........ok
t/zvg_42prof_data...........ok
t/zvg_43prof_env............ok
t/zvg_50dbm.................ok
t/zvg_60preparse............ok
t/zvg_65transact............skipped: Transactions not supported by DBD::Gofer
t/zvg_70callbacks...........ok
t/zvg_72childhandles........ok
t/zvg_80proxy...............skipped: modules required for proxy are probably not installed (e.g., RPC/PlClient.pm)
t/zvg_85gofer...............ok
t/zvg_86gofer_fail..........skipped: Gofer DBI_AUTOPROXY
t/zvg_87gofer_cache.........skipped: Gofer DBI_AUTOPROXY
t/zvp_01basics..............ok
t/zvp_02dbidrv..............ok
t/zvp_03handle..............ok
t/zvp_04mods................ok
t/zvp_05thrclone............ok
t/zvp_06attrs...............ok
t/zvp_07kids................skipped: $h->{Kids} attribute not supported for DBI::PurePerl
t/zvp_08keeperr.............ok
t/zvp_09trace...............ok
t/zvp_10examp...............ok
t/zvp_11fetch...............ok
t/zvp_12quote...............ok
t/zvp_13taint...............skipped: Taint attributes not supported with DBI::PurePerl
t/zvp_14utf8................ok
t/zvp_15array...............ok
t/zvp_19fhtrace.............ok
t/zvp_20meta................ok
t/zvp_30subclass............ok
t/zvp_40profile.............skipped: profiling not supported for DBI::PurePerl
t/zvp_41prof_dump...........skipped: profiling not supported for DBI::PurePerl
t/zvp_42prof_data...........skipped: profiling not supported for DBI::PurePerl
t/zvp_43prof_env............skipped: profiling not supported for DBI::PurePerl
t/zvp_50dbm.................ok
t/zvp_60preparse............skipped: preparse not supported for DBI::PurePerl
t/zvp_65transact............ok
t/zvp_70callbacks...........skipped: $h->{Callbacks} attribute not supported for DBI::PurePerl
t/zvp_72childhandles........ok
t/zvp_80proxy...............skipped: modules required for proxy are probably not installed (e.g., RPC/PlClient.pm)
t/zvp_85gofer...............ok
t/zvp_86gofer_fail..........skipped: requires Callbacks which are not supported with PurePerl
t/zvp_87gofer_cache.........ok
t/zvxgp_01basics............ok
t/zvxgp_02dbidrv............ok
t/zvxgp_03handle............ok
t/zvxgp_04mods..............ok
t/zvxgp_05thrclone..........ok
t/zvxgp_06attrs.............ok
t/zvxgp_07kids..............skipped: $h->{Kids} attribute not supported for DBI::PurePerl
t/zvxgp_08keeperr...........ok
t/zvxgp_09trace.............ok
t/zvxgp_10examp.............ok
t/zvxgp_11fetch.............ok
t/zvxgp_12quote.............ok
t/zvxgp_13taint.............skipped: Taint attributes not supported with DBI::PurePerl
t/zvxgp_14utf8..............ok
t/zvxgp_15array.............ok
t/zvxgp_19fhtrace...........ok
t/zvxgp_20meta..............ok
t/zvxgp_30subclass..........ok
t/zvxgp_40profile...........skipped: profiling not supported for DBI::PurePerl
t/zvxgp_41prof_dump.........skipped: profiling not supported for DBI::PurePerl
t/zvxgp_42prof_data.........skipped: profiling not supported for DBI::PurePerl
t/zvxgp_43prof_env..........skipped: profiling not supported for DBI::PurePerl
t/zvxgp_50dbm...............ok
t/zvxgp_60preparse..........skipped: preparse not supported for DBI::PurePerl
t/zvxgp_65transact..........skipped: Transactions not supported by DBD::Gofer
t/zvxgp_70callbacks.........skipped: $h->{Callbacks} attribute not supported for DBI::PurePerl
t/zvxgp_72childhandles......ok
t/zvxgp_80proxy.............skipped: modules required for proxy are probably not installed (e.g., RPC/PlClient.pm)
t/zvxgp_85gofer.............ok
t/zvxgp_86gofer_fail........skipped: requires Callbacks which are not supported with PurePerl
t/zvxgp_87gofer_cache.......skipped: Gofer DBI_AUTOPROXY
All tests successful.
Files=126, Tests=5846, 66 wallclock secs ( 1.62 usr  0.20 sys + 56.11 cusr  5.87 csys = 63.80 CPU)
Result: PASS
test.pl 
DBI test application $Revision: 9451 $
Switch: DBI 1.602 by Tim Bunce, 1.602
Available Drivers: DBM, ExampleP, File, Gofer, Proxy, Sponge
dbi:ExampleP:: testing 3 sets of 20 connections:
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 
Disconnecting...
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 
Disconnecting...
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 
Disconnecting...
connect 20 and disconnect them, 3 times: 0.0132s / 60 = 0.0002s
Testing handle creation speed...
27777 NullP sth/s perl 5.008008 x86_64-linux-thread-multi-ld (gcc 4.1.2 -g -O3) 0.000036s

test.pl done
[ERROR] MAKE INSTALL failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) make[1]: warning: -jN forced in submake: disabling jobserver mode.
Appending installation info to /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/perllocal.pod
/bin/sh: /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/perllocal.pod: ©Úµ´¤£²ÅÅv­­ªº¾Þ§@
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ERROR: Can't create '/opt/perl/testers/bin'
Do not have write permissions on '/opt/perl/testers/bin'
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 at -e line 1
make[1]: *** [pure_site_install] Error 13


Key 'ok' () is of invalid type for 'CPANPLUS::Backend::RV::new' provided by CPANPLUS::Backend::__ANON__ at /opt/perl/testers/lib/site_perl/5.8.8/CPANPLUS/Backend.pm line 395
*** DBI installation cancelled.
*** Installing Apache::Session...
==> MISSING Signature file! <==
Running [/opt/perl/testers/bin/perl /opt/perl/testers/bin/cpanp-run-perl /home/imacat/.cpanplus/5.8.8/build/Apache-Session-1.86/Makefile.PL ]...

*** REQUEST ***
Please use Test::Reporter to report test results - it's the only way to measure
popularity of distribution.

If you use perl older than 5.6 - write to alexchorny[AT]gmail.com
and tell me what version do you use, and why.

Warning: prerequisite Test::Deep 0.082 not found.
Warning: prerequisite Test::Exception 0.15 not found.
Writing Makefile for Apache::Session
==> MISSING Signature file! <==
Running [/opt/perl/testers/bin/perl /opt/perl/testers/bin/cpanp-run-perl /home/imacat/.cpanplus/5.8.8/build/Test-Deep-0.100/Makefile.PL ]...
Warning: prerequisite Test::NoWarnings 0.02 not found.
Warning: prerequisite Test::Tester 0.04 not found.
Writing Makefile for Test::Deep
==> MISSING Signature file! <==
Running [/opt/perl/testers/bin/perl /opt/perl/testers/bin/cpanp-run-perl /home/imacat/.cpanplus/5.8.8/build/Test-NoWarnings-0.084/Makefile.PL ]...
Warning: prerequisite Test::Tester 0.103 not found.
Writing Makefile for Test::NoWarnings
==> MISSING Signature file! <==
Running [/opt/perl/testers/bin/perl /opt/perl/testers/bin/cpanp-run-perl /home/imacat/.cpanplus/5.8.8/build/Test-Tester-0.107/Makefile.PL ]...
Writing Makefile for Test::Tester
Running [/usr/bin/make test -j 2]...
make[1]: warning: -jN forced in submake: disabling jobserver mode.
t/auto.............ok
t/capture..........ok
t/check_tests......ok
t/depth............ok
t/run_test.........ok
All tests successful.
Files=5, Tests=169,  0 wallclock secs ( 0.06 usr  0.03 sys +  0.19 cusr  0.04 csys =  0.32 CPU)
Result: PASS
[ERROR] MAKE INSTALL failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) make[1]: warning: -jN forced in submake: disabling jobserver mode.
Appending installation info to /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/perllocal.pod
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ERROR: Can't create '/opt/perl/testers/lib/5.8.8/Test'
Do not have write permissions on '/opt/perl/testers/lib/5.8.8/Test'
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 at -e line 1
make[1]: *** [pure_perl_install] Error 13
make[1]: *** Waiting for unfinished jobs....
/bin/sh: /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/perllocal.pod: ©Úµ´¤£²ÅÅv­­ªº¾Þ§@


[ERROR] Failed to install 'Test::Tester' as prerequisite for 'Test::NoWarnings'

[ERROR] Unable to satisfy prerequisites for 'Test::NoWarnings' -- aborting install

[ERROR] Unable to create a new distribution object for 'Test::NoWarnings' -- cannot continue

[ERROR] Failed to install 'Test::NoWarnings' as prerequisite for 'Test::Deep'

[ERROR] Unable to satisfy prerequisites for 'Test::Deep' -- aborting install

[ERROR] Unable to create a new distribution object for 'Test::Deep' -- cannot continue

[ERROR] Failed to install 'Test::Deep' as prerequisite for 'Apache::Session'

[ERROR] Unable to satisfy prerequisites for 'Apache::Session' -- aborting install

[ERROR] Unable to create a new distribution object for 'Apache::Session' -- cannot continue

Key 'ok' () is of invalid type for 'CPANPLUS::Backend::RV::new' provided by CPANPLUS::Backend::__ANON__ at /opt/perl/testers/lib/site_perl/5.8.8/CPANPLUS/Backend.pm line 395
*** Apache::Session installation cancelled.
*** ExtUtils::AutoInstall installation finished.
t/01_require.................Can't locate Class/Factory.pm in @INC (@INC contains: /opt/perl/testers/.cpanplus/5.8.8/build/OpenPlugin-0.11/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/OpenPlugin-0.11/blib/arch /home/imacat/lib/perl5 /opt/perl/testers/.cpanplus/5.8.8/build/OpenPlugin-0.11/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/OpenPlugin-0.11/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/OpenPlugin-0.11/blib /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/5.8.8 /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8 /opt/perl/testers/lib/site_perl .) at /opt/perl/testers/.cpanplus/5.8.8/build/OpenPlugin-0.11/blib/lib/OpenPlugin/Plugin.pm line 6.
BEGIN failed--compilation aborted at /opt/perl/testers/.cpanplus/5.8.8/build/OpenPlugin-0.11/blib/lib/OpenPlugin/Plugin.pm line 6.
Compilation failed in require at /opt/perl/testers/.cpanplus/5.8.8/build/OpenPlugin-0.11/blib/lib/OpenPlugin.pm line 5.
BEGIN failed--compilation aborted at /opt/perl/testers/.cpanplus/5.8.8/build/OpenPlugin-0.11/blib/lib/OpenPlugin.pm line 5.
Compilation failed in require at t/01_require.t line 8.
BEGIN failed--compilation aborted at t/01_require.t line 8.
# Looks like your test died before it could output anything.
 Dubious, test returned 255 (wstat 65280, 0xff00)
 Failed 1/1 subtests 
t/02_config..................Can't locate Class/Factory.pm in @INC (@INC contains: /opt/perl/testers/.cpanplus/5.8.8/build/OpenPlugin-0.11/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/OpenPlugin-0.11/blib/arch /home/imacat/lib/perl5 /opt/perl/testers/.cpanplus/5.8.8/build/OpenPlugin-0.11/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/OpenPlugin-0.11/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/OpenPlugin-0.11/blib /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/5.8.8 /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8 /opt/perl/testers/lib/site_perl .) at /opt/perl/testers/.cpanplus/5.8.8/build/OpenPlugin-0.11/blib/lib/OpenPlugin/Plugin.pm line 6.
BEGIN failed--compilation aborted at /opt/perl/testers/.cpanplus/5.8.8/build/OpenPlugin-0.11/blib/lib/OpenPlugin/Plugin.pm line 6.
Compilation failed in require at /opt/perl/testers/.cpanplus/5.8.8/build/OpenPlugin-0.11/blib/lib/OpenPlugin.pm line 5.
BEGIN failed--compilation aborted at /opt/perl/testers/.cpanplus/5.8.8/build/OpenPlugin-0.11/blib/lib/OpenPlugin.pm line 5.
Compilation failed in require at t/02_config.t line 9.
BEGIN failed--compilation aborted at t/02_config.t line 9.
# Looks like your test died before it could output anything.
 Dubious, test returned 255 (wstat 65280, 0xff00)
 Failed 3/3 subtests 
t/03_log.....................Can't locate Class/Factory.pm in @INC (@INC contains: ./t /opt/perl/testers/.cpanplus/5.8.8/build/OpenPlugin-0.11/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/OpenPlugin-0.11/blib/arch /home/imacat/lib/perl5 /opt/perl/testers/.cpanplus/5.8.8/build/OpenPlugin-0.11/blib /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/5.8.8 /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8 /opt/perl/testers/lib/site_perl .) at /opt/perl/testers/.cpanplus/5.8.8/build/OpenPlugin-0.11/blib/lib/OpenPlugin/Plugin.pm line 6.
BEGIN failed--compilation aborted at /opt/perl/testers/.cpanplus/5.8.8/build/OpenPlugin-0.11/blib/lib/OpenPlugin/Plugin.pm line 6.
Compilation failed in require at /opt/perl/testers/.cpanplus/5.8.8/build/OpenPlugin-0.11/blib/lib/OpenPlugin.pm line 5.
BEGIN failed--compilation aborted at /opt/perl/testers/.cpanplus/5.8.8/build/OpenPlugin-0.11/blib/lib/OpenPlugin.pm line 5.
Compilation failed in require at t/03_log.t line 10.
BEGIN failed--compilation aborted at t/03_log.t line 10.
# Looks like your test died before it could output anything.
 Dubious, test returned 255 (wstat 65280, 0xff00)
 Failed 5/5 subtests 
t/04_exception...............Can't locate Class/Factory.pm in @INC (@INC contains: ./t /opt/perl/testers/.cpanplus/5.8.8/build/OpenPlugin-0.11/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/OpenPlugin-0.11/blib/arch /home/imacat/lib/perl5 /opt/perl/testers/.cpanplus/5.8.8/build/OpenPlugin-0.11/blib /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/5.8.8 /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8 /opt/perl/testers/lib/site_perl .) at /opt/perl/testers/.cpanplus/5.8.8/build/OpenPlugin-0.11/blib/lib/OpenPlugin/Plugin.pm line 6.
BEGIN failed--compilation aborted at /opt/perl/testers/.cpanplus/5.8.8/build/OpenPlugin-0.11/blib/lib/OpenPlugin/Plugin.pm line 6.
Compilation failed in require at /opt/perl/testers/.cpanplus/5.8.8/build/OpenPlugin-0.11/blib/lib/OpenPlugin.pm line 5.
BEGIN failed--compilation aborted at /opt/perl/testers/.cpanplus/5.8.8/build/OpenPlugin-0.11/blib/lib/OpenPlugin.pm line 5.
Compilation failed in require at t/04_exception.t line 10.
BEGIN failed--compilation aborted at t/04_exception.t line 10.
# Looks like your test died before it could output anything.
 Dubious, test returned 255 (wstat 65280, 0xff00)
 Failed 10/10 subtests 
t/cache_file.................Can't locate Class/Factory.pm in @INC (@INC contains: ./t /opt/perl/testers/.cpanplus/5.8.8/build/OpenPlugin-0.11/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/OpenPlugin-0.11/blib/arch /home/imacat/lib/perl5 /opt/perl/testers/.cpanplus/5.8.8/build/OpenPlugin-0.11/blib /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/5.8.8 /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8 /opt/perl/testers/lib/site_perl .) at /opt/perl/testers/.cpanplus/5.8.8/build/OpenPlugin-0.11/blib/lib/OpenPlugin/Plugin.pm line 6.
BEGIN failed--compilation aborted at /opt/perl/testers/.cpanplus/5.8.8/build/OpenPlugin-0.11/blib/lib/OpenPlugin/Plugin.pm line 6.
Compilation failed in require at /opt/perl/testers/.cpanplus/5.8.8/build/OpenPlugin-0.11/blib/lib/OpenPlugin.pm line 5.
BEGIN failed--compilation aborted at /opt/perl/testers/.cpanplus/5.8.8/build/OpenPlugin-0.11/blib/lib/OpenPlugin.pm line 5.
Compilation failed in require at t/cache_file.t line 9.
BEGIN failed--compilation aborted at t/cache_file.t line 9.
# Looks like your test died before it could output anything.
 Dubious, test returned 255 (wstat 65280, 0xff00)
 Failed 3/3 subtests 
t/request_cgi................Can't locate Class/Factory.pm in @INC (@INC contains: ./t /opt/perl/testers/.cpanplus/5.8.8/build/OpenPlugin-0.11/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/OpenPlugin-0.11/blib/arch /home/imacat/lib/perl5 /opt/perl/testers/.cpanplus/5.8.8/build/OpenPlugin-0.11/blib /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/5.8.8 /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8 /opt/perl/testers/lib/site_perl .) at /opt/perl/testers/.cpanplus/5.8.8/build/OpenPlugin-0.11/blib/lib/OpenPlugin/Plugin.pm line 6.
BEGIN failed--compilation aborted at /opt/perl/testers/.cpanplus/5.8.8/build/OpenPlugin-0.11/blib/lib/OpenPlugin/Plugin.pm line 6.
Compilation failed in require at /opt/perl/testers/.cpanplus/5.8.8/build/OpenPlugin-0.11/blib/lib/OpenPlugin.pm line 5.
BEGIN failed--compilation aborted at /opt/perl/testers/.cpanplus/5.8.8/build/OpenPlugin-0.11/blib/lib/OpenPlugin.pm line 5.
Compilation failed in require at t/request_cgi.t line 10.
BEGIN failed--compilation aborted at t/request_cgi.t line 10.
# Looks like your test died before it could output anything.
 Dubious, test returned 255 (wstat 65280, 0xff00)
 Failed 11/11 subtests 
t/session_apachesession......Can't locate Class/Factory.pm in @INC (@INC contains: ./t /opt/perl/testers/.cpanplus/5.8.8/build/OpenPlugin-0.11/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/OpenPlugin-0.11/blib/arch /home/imacat/lib/perl5 /opt/perl/testers/.cpanplus/5.8.8/build/OpenPlugin-0.11/blib /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/5.8.8 /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8 /opt/perl/testers/lib/site_perl .) at /opt/perl/testers/.cpanplus/5.8.8/build/OpenPlugin-0.11/blib/lib/OpenPlugin/Plugin.pm line 6.
BEGIN failed--compilation aborted at /opt/perl/testers/.cpanplus/5.8.8/build/OpenPlugin-0.11/blib/lib/OpenPlugin/Plugin.pm line 6.
Compilation failed in require at /opt/perl/testers/.cpanplus/5.8.8/build/OpenPlugin-0.11/blib/lib/OpenPlugin.pm line 5.
BEGIN failed--compilation aborted at /opt/perl/testers/.cpanplus/5.8.8/build/OpenPlugin-0.11/blib/lib/OpenPlugin.pm line 5.
Compilation failed in require at t/session_apachesession.t line 10.
BEGIN failed--compilation aborted at t/session_apachesession.t line 10.
# Looks like your test died before it could output anything.
 Dubious, test returned 255 (wstat 65280, 0xff00)
 Failed 5/5 subtests 

Test Summary Report
-------------------
t/01_require.t           (Wstat: 65280 Tests: 0 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 1 tests but ran 0.
t/02_config.t            (Wstat: 65280 Tests: 0 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 3 tests but ran 0.
t/03_log.t               (Wstat: 65280 Tests: 0 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 5 tests but ran 0.
t/04_exception.t         (Wstat: 65280 Tests: 0 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 10 tests but ran 0.
t/cache_file.t           (Wstat: 65280 Tests: 0 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 3 tests but ran 0.
t/request_cgi.t          (Wstat: 65280 Tests: 0 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 11 tests but ran 0.
t/session_apachesession.t (Wstat: 65280 Tests: 0 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 5 tests but ran 0.
Files=7, Tests=0,  0 wallclock secs ( 0.01 usr  0.00 sys +  0.18 cusr  0.04 csys =  0.23 CPU)
Result: FAIL
Failed 7/7 test programs. 0/0 subtests failed.
make: *** [test_dynamic] Error 255

[MSG] [Fri Mar 21 03:37:10 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'


MISSING PREREQUISITES:

It was observed that the test suite seem to fail without these modules:

Class::Factory

As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem.  For example:

WriteMakefile(
    AUTHOR      => 'ERIC (cpanplus-info@lists.sf.net)',
    ... # other information
    PREREQ_PM   => {
	'Class::Factory'	=> '0', # or a minimum working version
    }
);

If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be
worth a look.

Thanks! :-)


******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.03.

--

Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
  Platform:
    osname=linux, osvers=2.6.22.10, archname=x86_64-linux-thread-multi-ld
    uname='linux rinse 2.6.22.10 #1 smp sun oct 28 13:30:11 cst 2007 x86_64 gnulinux '
    config_args='-d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g -O3 -Duse64bitint -Duse64bitall -Dprefix=/opt/perl/testers -Dd_dosuid -Dinc_version_list=none -Acccdlflags=-fPIC -Duseshrplib=true -Dcf_email=imacat@mail.imacat.idv.tw'
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=define use64bitall=define uselongdouble=define
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
    optimize='-g -O3',
    cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include'
    ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers=''
    intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
    ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
    alignbytes=16, prototype=define
  Linker and Libraries:
    ld='gcc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib
    libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
    perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
    libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so
    gnulibc_version='2.3.6'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE'
    cccdlflags=' -fPIC', lddlflags='-shared -L/usr/local/lib'

• FAIL OpenPlugin-0.11 x86_64-linux-thread-multi-ld 2.6.22.10 by imacat