FAIL Getopt-AutoConf-1.06 x86_64-linux-thread-multi-ld 2.6.22.10

This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.

--

Dear DARREN,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Thu Mar 20 13:59:37 2008] Trying to get 'ftp://cpan.cdpa.nsysu.edu.tw/Unix/Lang/CPAN/authors/id/D/DA/DARREN/Getopt-AutoConf-1.06.tar.gz'
[MSG] [Thu Mar 20 13:59:39 2008] Trying to get 'ftp://cpan.cdpa.nsysu.edu.tw/Unix/Lang/CPAN/authors/id/D/DA/DARREN/CHECKSUMS'
[MSG] [Thu Mar 20 13:59:40 2008] Checksum matches for 'Getopt-AutoConf-1.06.tar.gz'
[MSG] [Thu Mar 20 13:59:40 2008] Extracted 'Getopt-AutoConf-1.06/'
[MSG] [Thu Mar 20 13:59:40 2008] Extracted 'Getopt-AutoConf-1.06/Makefile.PL'
[MSG] [Thu Mar 20 13:59:40 2008] Extracted 'Getopt-AutoConf-1.06/Changes'
[MSG] [Thu Mar 20 13:59:40 2008] Extracted 'Getopt-AutoConf-1.06/lib/'
[MSG] [Thu Mar 20 13:59:40 2008] Extracted 'Getopt-AutoConf-1.06/lib/Getopt/'
[MSG] [Thu Mar 20 13:59:40 2008] Extracted 'Getopt-AutoConf-1.06/lib/Getopt/AutoConf.pm'
[MSG] [Thu Mar 20 13:59:40 2008] Extracted 'Getopt-AutoConf-1.06/t/'
[MSG] [Thu Mar 20 13:59:40 2008] Extracted 'Getopt-AutoConf-1.06/t/03golandgoa.t'
[MSG] [Thu Mar 20 13:59:40 2008] Extracted 'Getopt-AutoConf-1.06/t/02usage.t'
[MSG] [Thu Mar 20 13:59:40 2008] Extracted 'Getopt-AutoConf-1.06/t/01load.t'
[MSG] [Thu Mar 20 13:59:40 2008] Extracted 'Getopt-AutoConf-1.06/README'
[MSG] [Thu Mar 20 13:59:40 2008] Extracted 'Getopt-AutoConf-1.06/MANIFEST'
[MSG] [Thu Mar 20 13:59:40 2008] Extracted 'Getopt::AutoConf' to '/opt/perl/testers/.cpanplus/5.8.8/build/Getopt-AutoConf-1.06'
[MSG] [Thu Mar 20 13:59:41 2008] Checking if your kit is complete...
Looks good
Writing Makefile for Getopt::AutoConf

[MSG] [Thu Mar 20 13:59:41 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Thu Mar 20 13:59:41 2008] cp lib/Getopt/AutoConf.pm blib/lib/Getopt/AutoConf.pm
Manifying blib/man3/Getopt::AutoConf.3

[ERROR] [Thu Mar 20 13:59:41 2008] MAKE TEST failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) t/01load...........ok
t/02usage.......... All 7 subtests passed 
t/03golandgoa...... All 7 subtests passed 

Test Summary Report
-------------------
t/02usage.t    (Wstat: 0 Tests: 7 Failed: 0)
  Parse errors: More than one plan found in TAP output
t/03golandgoa.t (Wstat: 0 Tests: 7 Failed: 0)
  Parse errors: More than one plan found in TAP output
Files=3, Tests=15,  0 wallclock secs ( 0.03 usr  0.00 sys +  0.16 cusr  0.03 csys =  0.22 CPU)
Result: FAIL
Failed 2/3 test programs. 0/15 subtests failed.
make: *** [test_dynamic] Error 255

[MSG] [Thu Mar 20 13:59:41 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'


******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.03.

--

Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
  Platform:
    osname=linux, osvers=2.6.22.10, archname=x86_64-linux-thread-multi-ld
    uname='linux rinse 2.6.22.10 #1 smp sun oct 28 13:30:11 cst 2007 x86_64 gnulinux '
    config_args='-d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g -O3 -Duse64bitint -Duse64bitall -Dprefix=/opt/perl/testers -Dd_dosuid -Dinc_version_list=none -Acccdlflags=-fPIC -Duseshrplib=true -Dcf_email=imacat@mail.imacat.idv.tw'
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=define use64bitall=define uselongdouble=define
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
    optimize='-g -O3',
    cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include'
    ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers=''
    intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
    ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
    alignbytes=16, prototype=define
  Linker and Libraries:
    ld='gcc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib
    libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
    perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
    libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so
    gnulibc_version='2.3.6'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE'
    cccdlflags=' -fPIC', lddlflags='-shared -L/usr/local/lib'

• FAIL Getopt-AutoConf-1.06 x86_64-linux-thread-multi-ld 2.6.22.10 by imacat