Front page | perl.cpan.testers |
Postings from March 2008
FAIL WebFS-FileCopy-1.04 x86_64-linux-thread-multi-ld 2.6.22.10
From:
imacat
Date:
March 19, 2008 10:43
Subject:
FAIL WebFS-FileCopy-1.04 x86_64-linux-thread-multi-ld 2.6.22.10
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear BZAJAC,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Thu Mar 20 01:41:48 2008] Trying to get 'ftp://ftp.cpan.org/pub/CPAN/authors/id/B/BZ/BZAJAC/WebFS-FileCopy-1.04.tar.gz'
[MSG] [Thu Mar 20 01:41:54 2008] Trying to get 'ftp://ftp.cpan.org/pub/CPAN/authors/id/B/BZ/BZAJAC/CHECKSUMS'
[MSG] [Thu Mar 20 01:41:59 2008] Checksum matches for 'WebFS-FileCopy-1.04.tar.gz'
[MSG] [Thu Mar 20 01:41:59 2008] Extracted 'WebFS-FileCopy-1.04/'
[MSG] [Thu Mar 20 01:41:59 2008] Extracted 'WebFS-FileCopy-1.04/Makefile.PL'
[MSG] [Thu Mar 20 01:41:59 2008] Extracted 'WebFS-FileCopy-1.04/README'
[MSG] [Thu Mar 20 01:41:59 2008] Extracted 'WebFS-FileCopy-1.04/CHANGES'
[MSG] [Thu Mar 20 01:41:59 2008] Extracted 'WebFS-FileCopy-1.04/MANIFEST'
[MSG] [Thu Mar 20 01:41:59 2008] Extracted 'WebFS-FileCopy-1.04/lib/'
[MSG] [Thu Mar 20 01:41:59 2008] Extracted 'WebFS-FileCopy-1.04/lib/WebFS/'
[MSG] [Thu Mar 20 01:41:59 2008] Extracted 'WebFS-FileCopy-1.04/lib/WebFS/FileCopy.pm'
[MSG] [Thu Mar 20 01:41:59 2008] Extracted 'WebFS-FileCopy-1.04/lib/WebFS/FileCopy/'
[MSG] [Thu Mar 20 01:41:59 2008] Extracted 'WebFS-FileCopy-1.04/lib/WebFS/FileCopy/Put/'
[MSG] [Thu Mar 20 01:41:59 2008] Extracted 'WebFS-FileCopy-1.04/lib/WebFS/FileCopy/Put/FTP.pm'
[MSG] [Thu Mar 20 01:41:59 2008] Extracted 'WebFS-FileCopy-1.04/lib/WebFS/FileCopy/Put/File.pm'
[MSG] [Thu Mar 20 01:41:59 2008] Extracted 'WebFS-FileCopy-1.04/lib/WebFS/FileCopy/Put.pm'
[MSG] [Thu Mar 20 01:41:59 2008] Extracted 'WebFS-FileCopy-1.04/t/'
[MSG] [Thu Mar 20 01:41:59 2008] Extracted 'WebFS-FileCopy-1.04/t/file1'
[MSG] [Thu Mar 20 01:41:59 2008] Extracted 'WebFS-FileCopy-1.04/t/01copy.t'
[MSG] [Thu Mar 20 01:41:59 2008] Extracted 'WebFS-FileCopy-1.04/t/file2'
[MSG] [Thu Mar 20 01:41:59 2008] Extracted 'WebFS-FileCopy-1.04/t/file3'
[MSG] [Thu Mar 20 01:41:59 2008] Extracted 'WebFS-FileCopy-1.04/t/file5'
[MSG] [Thu Mar 20 01:41:59 2008] Extracted 'WebFS-FileCopy-1.04/t/dir/'
[MSG] [Thu Mar 20 01:41:59 2008] Extracted 'WebFS-FileCopy-1.04/t/dir/file6'
[MSG] [Thu Mar 20 01:41:59 2008] Extracted 'WebFS-FileCopy-1.04/patches/'
[MSG] [Thu Mar 20 01:41:59 2008] Extracted 'WebFS-FileCopy-1.04/patches/LWPng-0.24-patch-1'
[MSG] [Thu Mar 20 01:41:59 2008] Extracted 'WebFS-FileCopy-1.04/patches/LWPng-0.24-patch-2'
[MSG] [Thu Mar 20 01:41:59 2008] Extracted 'WebFS::FileCopy' to '/opt/perl/testers/.cpanplus/5.8.8/build/WebFS-FileCopy-1.04'
[MSG] [Thu Mar 20 01:42:00 2008] Checking for Digest::MD5 2.06...ok
Checking for Data::Dumper 2.081...ok
Checking for Net::FTP 2.56...ok
Checking for MIME::Base64 2.05...ok
Checking for HTML::Parser 2.20...ok
Checking for LWP 5.48...ok
Checking for LWP::Version 0.24... not found
*** For WebFS::FileCopy you require version 0.24, or later, of
LWP::Version from CPAN/authors/id/G/GA/GAAS/LWPng-alpha-x.x.tar.gz.
Checking for URI 1.09...ok
Checking if your kit is complete...
Looks good
Writing Makefile for WebFS::FileCopy
[MSG] [Thu Mar 20 01:42:00 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Thu Mar 20 01:42:00 2008] cp lib/WebFS/FileCopy/Put.pm blib/lib/WebFS/FileCopy/Put.pm
cp lib/WebFS/FileCopy.pm blib/lib/WebFS/FileCopy.pm
cp lib/WebFS/FileCopy/Put/File.pm blib/lib/WebFS/FileCopy/Put/File.pm
cp lib/WebFS/FileCopy/Put/FTP.pm blib/lib/WebFS/FileCopy/Put/FTP.pm
Manifying blib/man3/WebFS::FileCopy::Put.3
Manifying blib/man3/WebFS::FileCopy.3
[ERROR] [Thu Mar 20 01:42:02 2008] MAKE TEST failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) t/01copy......Can't locate LWP/Version.pm in @INC (@INC contains: /opt/perl/testers/.cpanplus/5.8.8/build/WebFS-FileCopy-1.04/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/WebFS-FileCopy-1.04/blib/arch /home/imacat/lib/perl5 /opt/perl/testers/.cpanplus/5.8.8/build/WebFS-FileCopy-1.04/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/WebFS-FileCopy-1.04/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/WebFS-FileCopy-1.04/blib /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/5.8.8 /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8 /opt/perl/testers/lib/site_perl .) at /opt/perl/testers/.cpanplus/5.8.8/build/WebFS-FileCopy-1.04/blib/lib/WebFS/FileCopy.pm line 15.
BEGIN failed--compilation aborted at /opt/perl/testers/.cpanplus/5.8.8/build/WebFS-FileCopy-1.04/blib/lib/WebFS/FileCopy.pm line 15.
Compilation failed in require at t/01copy.t line 20.
BEGIN failed--compilation aborted at t/01copy.t line 20.
Dubious, test returned 2 (wstat 512, 0x200)
Failed 187/187 subtests
Test Summary Report
-------------------
t/01copy.t (Wstat: 512 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 2
Parse errors: Bad plan. You planned 187 tests but ran 1.
Files=1, Tests=1, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.03 cusr 0.00 csys = 0.05 CPU)
Result: FAIL
Failed 1/1 test programs. 1/1 subtests failed.
make: *** [test_dynamic] Error 2
[MSG] [Thu Mar 20 01:42:02 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'
MISSING PREREQUISITES:
It was observed that the test suite seem to fail without these modules:
LWP::Version
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'BZAJAC (cpanplus-info@lists.sf.net)',
... # other information
PREREQ_PM => {
'LWP::Version' => '0', # or a minimum working version
}
);
If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be
worth a look.
Thanks! :-)
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPAN::YACSmoke 0.03.
--
Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
Platform:
osname=linux, osvers=2.6.22.10, archname=x86_64-linux-thread-multi-ld
uname='linux rinse 2.6.22.10 #1 smp sun oct 28 13:30:11 cst 2007 x86_64 gnulinux '
config_args='-d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g -O3 -Duse64bitint -Duse64bitall -Dprefix=/opt/perl/testers -Dd_dosuid -Dinc_version_list=none -Acccdlflags=-fPIC -Duseshrplib=true -Dcf_email=imacat@mail.imacat.idv.tw'
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=define uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-g -O3',
cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include'
ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
alignbytes=16, prototype=define
Linker and Libraries:
ld='gcc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so
gnulibc_version='2.3.6'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE'
cccdlflags=' -fPIC', lddlflags='-shared -L/usr/local/lib'
-
FAIL WebFS-FileCopy-1.04 x86_64-linux-thread-multi-ld 2.6.22.10
by imacat