FAIL Baldrick-0.85 i686-linux-thread-multi-64int 2.6.14

This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.

--
Dear Matt Hucke,
    
This is a computer-generated report for Baldrick-0.85
on perl 5.8.7, created by CPAN-Reporter-1.12. 

Thank you for uploading your work to CPAN.  However, there was a problem
testing your distribution.

If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:

http://cpantest.grango.org/wiki/CPANAuthorNotes

Sections of this report:

    * Tester comments
    * Program output
    * Prerequisites
    * Environment and other context

------------------------------
TESTER COMMENTS
------------------------------

Additional comments from tester: 

this report is from an automated smoke testing program
and was not reviewed by a human for accuracy

------------------------------
PROGRAM OUTPUT
------------------------------

Output from '/usr/bin/make test':

PERL_DL_NONLAZY=1 /home/src/perl/repoperls/installed-perls/maint-5.8/pbyWflA/perl-5.8.0@26727/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/001_load......
#   Failed test 'use Baldrick;'
#   at t/001_load.t line 7.
#     Tried to use 'Baldrick'.
#     Error:  Can't locate Baldrick/Response.pm in @INC (@INC contains: /home/sand/.cpan/build/Baldrick-0.85-B1WSUd/blib/lib /home/sand/.cpan/build/Baldrick-0.85-B1WSUd/blib/arch /home/src/perl/repoperls/installed-perls/maint-5.8/pbyWflA/perl-5.8.0@26727/lib/5.8.7/i686-linux-thread-multi-64int /home/src/perl/repoperls/installed-perls/maint-5.8/pbyWflA/perl-5.8.0@26727/lib/5.8.7 /home/src/perl/repoperls/installed-perls/maint-5.8/pbyWflA/perl-5.8.0@26727/lib/site_perl/5.8.7/i686-linux-thread-multi-64int /home/src/perl/repoperls/installed-perls/maint-5.8/pbyWflA/perl-5.8.0@26727/lib/site_perl/5.8.7 /home/src/perl/repoperls/installed-perls/maint-5.8/pbyWflA/perl-5.8.0@26727/lib/site_perl .) at /home/sand/.cpan/build/Baldrick-0.85-B1WSUd/blib/lib/Baldrick/Baldrick.pm line 22.
# BEGIN failed--compilation aborted at /home/sand/.cpan/build/Baldrick-0.85-B1WSUd/blib/lib/Baldrick/Baldrick.pm line 22.
# Compilation failed in require at /home/sand/.cpan/build/Baldrick-0.85-B1WSUd/blib/lib/Baldrick.pm line 5.
# BEGIN failed--compilation aborted at /home/sand/.cpan/build/Baldrick-0.85-B1WSUd/blib/lib/Baldrick.pm line 5.
# Compilation failed in require at (eval 3) line 2.
# BEGIN failed--compilation aborted at (eval 3) line 2.
# Looks like you failed 1 test of 1.
 Dubious, test returned 1 (wstat 256, 0x100)
 Failed 1/1 subtests 

Test Summary Report
-------------------
t/001_load.t (Wstat: 256 Tests: 1 Failed: 1)
  Failed test:  1
  Non-zero exit status: 1
Files=1, Tests=1,  1 wallclock secs ( 0.02 usr  0.00 sys +  0.18 cusr  0.02 csys =  0.22 CPU)
Result: FAIL
Failed 1/1 test programs. 1/1 subtests failed.
make: *** [test_dynamic] Fehler 1

------------------------------
PREREQUISITES
------------------------------

Prerequisite modules loaded:

requires:

    Module              Need Have    
    ------------------- ---- --------
    Attribute::Handlers 0    0.78_01 
    Carp                0    1.04    
    CGI                 0    3.33    
    Config::General     0    2.38    
    Data::Dumper        0    2.121_08
    DBI                 0    1.602   
    Getopt::Long        0    2.37    
    MIME::Base64        0    3.07    
    Test::Simple        0.44 0.74    
    Time::HiRes         0    1.9712  

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    LANG = de_DE.UTF-8
    PATH = /usr/lib/ccache:/home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin
    PERL5LIB = 
    PERL5OPT = 
    PERL5_CPANPLUS_IS_RUNNING = 23579
    PERL5_CPAN_IS_RUNNING = 23579
    PERL_MM_USE_DEFAULT = 1
    SHELL = /usr/bin/zsh
    TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

    $^X = /home/src/perl/repoperls/installed-perls/maint-5.8/pbyWflA/perl-5.8.0@26727/bin/perl
    $UID/$EUID = 1005 / 1005
    $GID = 1005 1005
    $EGID = 1005 1005

Perl module toolchain versions installed:

    Module              Have   
    ------------------- -------
    CPAN                1.92_59
    Cwd                 3.2701 
    ExtUtils::CBuilder  0.22   
    ExtUtils::Command   1.14   
    ExtUtils::Install   1.50   
    ExtUtils::MakeMaker 6.44   
    ExtUtils::Manifest  1.51   
    ExtUtils::ParseXS   2.19   
    File::Spec          3.2701 
    Module::Build       0.2808 
    Module::Signature   0.55   
    Test::Harness       3.10   
    Test::More          0.74   
    YAML                0.66   
    YAML::Syck          1.04   
    version             0.74   


--

Summary of my perl5 (revision 5 version 8 subversion 7) configuration:
  Platform:
    osname=linux, osvers=2.6.14, archname=i686-linux-thread-multi-64int
    uname='linux k75 2.6.14 #1 fri jan 27 16:22:47 cet 2006 i686 gnulinux '
    config_args='-Dprefix=/home/src/perl/repoperls/installed-perls/maint-5.8/pbyWflA/perl-5.8.0@26727 -Dinstallusrbinperl=n -Uversiononly -des -Duse64bitint -Dusedevel -Dusethreads'
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=define use64bitall=undef uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
    optimize='-O2',
    cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include'
    ccversion='', gccversion='4.0.3 20060115 (prerelease) (Debian 4.0.2-7)', gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
    ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=4, prototype=define
  Linker and Libraries:
    ld='cc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib
    libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
    perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
    libc=/lib/libc-2.3.5.so, so=so, useshrplib=false, libperl=libperl.a
    gnulibc_version='2.3.5'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
    cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'

• FAIL Baldrick-0.85 i686-linux-thread-multi-64int 2.6.14 by andreas.koenig.gmwojprw